Products from Awesomatix
Verantwortlicher nach GPSR – person responsible GPSR:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
Hersteller – manufacturer:
RC-KleinKram Stefan Klein
Auf der Schinning 5
57586 Weitefeld
Deutschland
www.rc-kleinkram.de
info@rc-kleinkram.de
No results were found for the filter!
A800 Bearing Housing (2 pieces) DT10-2-1 is the replacement for DT10-2-1 which has been slightly modified.
€9.00
*
currently 2x in stock
A800 Bearing Housing (2 pieces) DT10-2 is the replacement for DT10 which has been slightly modified.
€8.50
*
currently 2x in stock
Spare part for LS1
€4.50
*
currently 1x in stock
Genuine Awesomatix part!
€5.00
*
currently 45x in stock
Spare part for LS1
€4.50
*
currently 5x in stock
GD2 Satellite Gear x 4
€6.00
*
currently 3x in stock
GD 2 Bevel Gear x 2
€6.00
*
currently 3x in stock
A800 Gear Diff Set Already including the new outdrives ST23X and new sealings P46R Replaces GDB2
€99.00
*
currently 10x in stock
The Horizontal Rear Bodypost Set (HRB) lowers the center of gravity. This improves the handling and cornerspeed of your car which leads to faster laptimes. Furthermore the bodyshell will become more stiff in the rear end section and has...
€38.00
*
currently 15x in stock
IFJ was designing for reducing of the friction between the spool outdrives and the dogbones. Due to the reduced friction in IFJ the front suspension is also a bit softer and smoother on power and under braking. According to reports from...
€30.00
*
currently 12x in stock
IRJ reduces the friction between the outdrive and the dogbone. It increases the efficiency of whole transmission which is an advantage in all situations. Especially in Stock classes the combination of IFJ and IRJ systems will improve the...
€30.00
*
currently 11x in stock
Awesomatix A12 LWRD Lightweight Rear Damper set Total weight of the LW Damper set is ~8,7g. This is a reduction of ~18g. compared to the std Damper (~26.7g) The LWRD allows to change the weight BIAS of your car and further adjust it by...
€68.00
*
currently 2x in stock
This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.
€9.00
*
currently 14x in stock
U-Ring for #6 and #3 dampers x 4
€6.50
*
currently 24x in stock
Genuine Awesomatix part!
€2.50
*
currently 9x in stock
Optional Awesomatix 1.2x7mm O-Ring for use with SCS set. The o-ring acts as additional ~10 gf/mm side springs but without affecting the rear vertical suspension rate. Only use in combination with SCS set. contains: 1x A12-OR127
€3.00
*
currently 8x in stock
OR14V Suspension Arm O-Rings are designed to replace the P07 Arm clip. The advantages are less weight, more reliable at accidents, and at certain conditions more grip due to elasticity at suspension action.
€9.00
*
currently 36x in stock
Genuine Awesomatix part!
€2.50
*
currently 24x in stock
Awesomatix A700-OR152 - 2x1.5mm U-Ring Will be used for AT78. OR152S can be installed in any direction but I prefer the open side of the U into shock.
€5.00
*
currently 4x in stock
Genuine Awesomatix part!
€2.50
*
currently 10x in stock
Genuine Awesomatix part!
€6.50
*
currently 3x in stock
This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.
€9.00
*
currently 15x in stock
Awesomatix A700-OR15M - Damper Output O-Ring
€2.00
*
currently 11x in stock
This O-Ring is made out of a new rubber material which is even more durable and less affected by silicon oil. The "V" O-Rings are easy to distinguish as they have a slight shade of brown.
€9.00
*
currently 14x in stock
Genuine Awesomatix part!
€2.00
*
currently 27x in stock
Genuine Awesomatix part!
€1.50
*
currently 12x in stock
Genuine Awesomatix part!
€1.50
*
currently 20x in stock
Downstop Collar x 5
€6.50
*
currently 1x in stock
P09X set is for "progressive" settings of the springs. P09X set includes 4 pcs of P09X plastic parts and 4 pcs of DIN915 M3X3 set screws. One of additional holes is for DIN915 M3X3 screw and has 3,1 mm distance to the main RHS screw. The...
€8.50
*
currently 4x in stock
Will replace any kind of DT10 - offers 26 steps (which is a lot!)
€7.50
*
currently 9x in stock
Genuine Awesomatix part!
€3.00
*
currently 7x in stock
Sway bar mount. Can be used on old A800 kits, but it is necessary to change also: - lower deck (C01B-X, C01B-XA, C01B-XAH) - sway bar stopper AT142 - ball bearings B63SS You may need also different standard screws. Should be used only...
€12.50
*
currently 14x in stock
Spool Pulley - will reduce friction. Latest version - more narrow than the previous one.
€11.00
*
currently 12x in stock