Genuine Durango Spares & Optionals! 21mm inner diameter 70mm length in the front 84mm length in the rear Made for Durango DEX8 - but will also fit for other cars with similiar dimensions.

SuperRad is an absolute trendy brand from the USA. Proudly made in the USA! Already quite expensive in the States - due to the high shipping costs until they arrive in Europe and the included sales tax, they are even more expensive. What counts is the performance - the price is then secondary. Scale: 1:10 Width: approx. 190mm Wheelbase: approx. 257mm Scope of delivery: Body...

SuperRad is an absolute trendy brand from the USA. Proudly made in the USA! Already quite expensive in the States - due to the high shipping costs until they arrive in Europe and the included sales tax, they are even more expensive. What counts is the performance - the price is then secondary. Scale: 1:10 Width: approx. 190mm Wheelbase: approx. 257mm Scope of delivery: Body...

XRAY revised this item in 2025 and changed from a normal spring steel variant to a ball head with a nickel coating. The new material is theoretically less sensitive to wear and therefore develops less play over time. At the same time, it is less frictional and thus ensures that the ball socket rotates more smoothly on the head. Note: XRAY made this change without any...

XRAY - X12 2021 - 4.2mm Ball End - M3x8mm (2 pcs) (SKU 372653)

ATTENTION: The body is super flat. This means that the body does not fit on old chassis with high shock tower´s. The rule of thumb should be: The shock tower must not be higher than the upper wishbones. Scale: 1:10 Width: approx. 192mm front / approx. 193mm rear Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear...

Scale: 1:10 Width: approx. 193mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped with additional...

Scale: 1:10 Width: approx. 189mm front / 188mm rear Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped...

Scale: 1:10 Width: approx. 190mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped with additional...

Scale: 1:10 Width: approx. 192mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped with additional...

Scale: 1:10 Width: approx. 189mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is equipped with additional...

Scale: 1:10 Width: approx. 193mm Wheelbase: approx. 257mm Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing 3d-printed rear mirrors Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows the actual scope of delivery. The painting example is...

Scale: 1:10 Mini Width: approx. 169mm Wheelbase: approx. 210-225mm (both wheelbases are possible cause there is no rear wheel arch marked) Scope of delivery: Body Window masking Decal sheet Rear wing Fastening material for rear wing Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with the unpainted body shows...

Scale: 1:10 Suitable for: any 1/10 formula chassis - starting with maybe 2015. It does NOT fit for old cars like Tamiya F103 which is used with transversal battery. Scope of delivery: Body Decal sheet Take care: The driver helmet and Halo are NOT included. Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with...

Scale: 1:10 Suitable for: any 1/10 formula chassis - starting with maybe 2015. It does NOT fit for old cars like Tamiya F103 which is used with transversal battery. Scope of delivery: Body Decal sheet Take care: The driver helmet and Halo are NOT included. Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with...

Scale: 1:10 Suitable for: any 1/10 formula chassis - starting with maybe 2015. It does NOT fit for old cars like Tamiya F103 which is used with transversal battery. Scope of delivery: Body Decal sheet Take care: The driver helmet and Halo are NOT included. Made of 0.75mm material. The body is delivered unpainted and not cut out. No complete car is offered! The picture with...

Suitable for ER-24 body from EvoRace Factory.

Suitable for 1/10 formula body.

We came and we conquered with our PEEK idler gears for the B7 and continuing on form for our ultimate idler gear solution, we're happy to release this machined PEEK idler for the Yokomo YZ2 (3 gear CA transmission). Machined 43T PEEK Idler Gear. Our PEEK gear range has gained a strong reputation for ultimate reliability and efficiency. These are manufactured to an extremely...

Genuine spare and optional parts for your Yokomo car! Replacement for B9-008FG

Genuine Mugen Spare & Option Parts :-) Replacement for E1071

We came and we conquered with our PEEK idler gears for the B7 and continuing on form for our ultimate idler gear solution, we're happy to release this machined PEEK idler for the Xray XB2 (3 gear transmission). Machined 38T PEEK Idler Gear. Our PEEK gear range has gained a strong reputation for ultimate reliability and efficiency. These are manufactured to an extremely high...

Machined 25T PEEK Idler Gears Set (3) for the XRAY XB2 25 5 Gear #320905 Conversion Set We came and we conquered with our PEEK idler gears for the B7 and continuing on form with our ultimate idler gear solution, we're happy to release this machined PEEK idler gear set for the XRAY XB2 25 5 Gear Conversion Set. No compromise, machined high precision, high performance...

Single Piece Carbon Fibre Rear Wing Brace for Xray XB2. WS Logo Engraved. Manufactured from premium matt finish 2mm Carbon Fibre.

Front Aluminium Ball Stud Mount for the Xray XB2 Manufactured in T6082 Aluminium with added half hole link position. Link height is also -1mm lower than factory option for availability of higher roll center setup options. Add 1mm washer to ballstud to replicate standard geometry. Designed to add optional position with option to run lower link height, be highly durable yet...

316 Stainless Steel 0° Front Bulkhead with Adjustable Roll Centre (ARC) for the Xray XB2 Manufactured in 316 Stainless Steel for exceptional strength and additional weight over stock plastic or aluminium options. Features Adjustable Roll Centre (ARC) design utilising supplied carbon fibre shims (1x 1mm 1x 0.5mm) Using 1mm shim replicates standard geometry. 1mm shim can be...

O Ring Style Carbon Fibre Battery Mount Set for the Xray XB2. Single O Ring Design. Compatible with original battery hold downs if you just desire the Carbon Tray! Manufactured from premium matt finish 3mm Carbon Fibre.

Pzero R USGT approved! The legendary multi national winning body has now been optimized for todays ultra low profile touring car suspensions. New 1/10 Italian super car modeled GT body with 194mm width allows you to run wider suspension or wheel hex set ups- excellent for high grip tracks to reduce rolling. Just like the real car, the Pzero R has deeply sculpted body lines...

XRAY revised this item in 2025 and changed from a normal spring steel variant to a ball head with a nickel coating. The new material is theoretically less sensitive to wear and therefore develops less play over time. At the same time, it is less frictional and thus ensures that the ball socket rotates more smoothly on the head. Note: XRAY made this change without any...

Not painted, not cut. Including decal sheet. Wheel arches are already pre-cut. Holes are already pre-drilled for TT-01 / TT-02 chassis! TAKE CARE: Will be delivered BULK.

Professional aluminum pliers suitable for 1/10 TC shock absorbers to adjust the shock length setting. Helps to hold the shock shaft without scratching or damaging the parts. Allows for perfect setting and adjustments of the shock lengths. Specifically compatible with XRAY XLP2 shocks, as well as other modern 1/10 TC shocks which are in the same length range, which is...

This set includes: 1x Tamiya 9803506 - Porsche 956 body shell incl. wing (not painted, not cut, not drilled) 1x Tamiya 9494259 - Porsche 956 decal sheet incl. window masks 1x Tamiya 9007689 - Porsche 956 H-Parts (rear wing mount + side mirrors) 1x RCK 240156 - optional front and rear light stickers IMPORTANT: There are screws, o-rings, washers or body clips included....

Genuine Tamiya Group C Chassis spare parts!

The MB-01 Chassis The compact, 2WD MB-01 chassis gives a choice of three types of wheelbases, and front- or rear- wheel drive system. This model employs a midship motor, rear-wheel drive setup. Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-...

Will be offered as competition car kit. No body, no wheels, no electronical components.

190mm Touring Car Body Scale: 1:10 Width: 190mm Wheelbase: ca. 257mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker (headlights, rear lights, grill) and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

The market for 1:12 foam tires is sometimes opaque and often only professionals can understand. What is missing is a cheap tire for hobby drivers. No dozens of variants. Not overly expensive. Still good and durable. Concentrate on the essentials and don't get carried away with possibilities. This is where we come in with our RCK foam tires for 1:12 PanCars! Two mixtures for...

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

There are different versions of the SDS: SDS Mini: smaller tool, fixed rpm SDS Mini22: smaller tool, fixed rpm (600), high capacity battery SDS Pro: adjustable rpm, motion sensitive SDS ULTRA: adjustable rpm, up to 700 SDS Mini / Mini22 / Pro / ULTRA PLUS: same as before, including a benchtop drill press The set includes 10 drills - from 0.6 to 2.2mm.

BMR-12 Light Weight Clear Body The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

Protoform 1720-00 - Pro-TW Rear Wing Set - 190mm (2pcs)

You're not looking wrong. So far, the 2002 was only available in M-chassis size - originally developed for the HPI Cup Racer. NOW it is also available in the correct 1:10 scale! Scale: 1/10 Wheelbase: approx. 257mm Width: approx. 200mm The body is very detailed and the scope of delivery is accordingly very large. In practice, this means that the body - if you build it as HPI...

Genuine Durango Spares & Optionals!

TR-12 Light Weight Clear Body The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

Genuine Durango Spares & Optionals!

Genuine Durango Spares & Optionals!

Genuine Durango Spares & Optionals!

Genuine XPRESS parts for your GripXero!

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

The rubber band is pulled over the tire and presses the tire onto the rim with even pressure. This is particularly important for off-road tires - as it avoids a gap between the tire and the rim. Perfect for 1:10 off-road tires. These tires typically have a diameter of around 85mm. Because the rubber is stretchable, this diameter can vary both upwards and downwards. Using it...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Genuine Tamiya TRF spare parts & optionals.

Glossy carbon fiber construction with alloy posts for extra secure lipo mounting.

To be used with the 1.2mm thin SCC lower deck only.

To be used with the 1.2mm thin SCC lower deck only. contains: 8pcs ST112-5 9pcs ST112-6 4pcs ST112-8 8pcs ST212-5 12pcs ST212-6 8pcs ST212-8 8pcs ST112-6L

Special made Awesomatix screw.