2WD Buggy Fan Shroud long is designed to be installed on top of the battery and directs the flow to the Frontend End-bell openings. It is perfectly suited for Stock and modified Classes. It is compatible with most 1/10 2WD Mid Motor Buggies and Stadium Trucks, 30mm Fans and 540 size motors. We recommend to use double sided tape to secure it to the chassis. Some trimming to...

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

+2mm Rear Link Mount for the Team Associated B7. Manufactured in T6082 Aluminium with inbuilt +2mm raised geometry to avoid use of multiple washers . Completed in a blue anodised finish with a 2nd operation WS logo. Component Weight - 6.1g

Machined 316 Stainless Steel Under Servo Weight for the Team Associated B7. Weighs 24 Grams which is marked in laser etched detail along with WS logo. Manufactured in 316 Stainless Steel, polished finish. NOTE - If using Factory Team 15.5mm Clamping Servo Horn #1370 the clamping screw must be swapped to a button head item for clearance.

B7 - Aluminium +2 -2 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating +2mm and -2mm link positions. Single piece aluminium design with machined threads to remove the factory nyloc nut for ease of ball stud removal and adjustment. Component Weight (Pair) - 3.01g

B7 - Aluminium +4 +0 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating 0mm and +4mm link positions. Single piece aluminium design with machined threads to remove the factory nyloc nut for ease of ball stud removal and adjustment. Component Weight (Pair) - 3.06g

Machined 26T PEEK Idler Gears Set (3) for the Team Associated B7. We wanted to create the ultimate fit and forget Idler Gear solution for the Team Associated B7 in terms of performance and reliability. No compromise, machined high precision, high performance material, considered design. Redesigned to take 5 X 9 X 3mm Bearings (Supplied) Reducing the bearing diameter to...

B7 One Degree C Block! With all pills in central position with the standard geometry D Block will place the inboard Toe at 1 degree (Effectively -2 degree compared to standard part). This gives option to access 0.5 degree and 0 degree inboard Toe as well as being able to alter pivot width by still having room to position pills in wide or narrow positions! Manufactured in...

O Ring Style Carbon Fibre Battery Mount Set for the Team Associated B7. Single O Ring Design. Compatible with original battery hold downs if you just desire the Carbon Tray! Manufactured from premium matt finish 3mm Carbon Fibre.

Universal 2mm Carbon Fibre Battery Hold Down Tabs. Supplied as a pair (2pcs)

Single Piece Carbon Fibre Rear Wing Brace for Team Associated B7. WS Logo Engraved. Manufactured from premium matt finish 2mm Carbon Fibre.

Carbon Fibre Roll 0.5mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pcs). Manufactured from premium matt finish 0.5mm Carbon Fibre. Component Weight - 0.22g (each)

Carbon Fibre Roll 1mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pcs). Manufactured from premium matt finish 1mm Carbon Fibre. Component Weight 0.45g (each)

Carbon Fibre Motor Mount for Team Associated B7. Manufactured from premium matt finish 5mm Carbon Fibre.

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92437. Component Weight - 29.17g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

Manufactured in 316 Stainless Steel with a 35% increase in cross sectional material for improved durability and increased weight over the original manufacturer component. Replaces AE # 92436. Component Weight - 30.03g

B7 Strengthened "Full Brace" D Block With the B7 series the D block is secured to the underside of the gearbox rather than the chassis plate. The WS "Full Brace" D block incorporates the D Block and Roll Bar mount into a singular billet aluminium piece. This allows the D block to be fastened to the transmission case in two planes underneath the box and to the flat back...

B7 Strengthened C Block! Manufactured in T6082 Aluminium with increased wall section surrounding pills and removal of notch compared to original part for improved durability. Replaces AE # 92432. Component Weight - 3.1g

B7 Strengthened D Block! If our "Full Brace" option D block is not for you, then look no further. Manufactured in T6082 Aluminium with increased wall section surrounding pills and increased cross section thickness across gearbox clearance notch for improved durability. Replaces AE # 92433. Replicates standard geometry. Component Weight - 3.69g

B7 73mm Arm Wide Pivot C and D Block Set! That's right, a wide pivot set to be used with the 73mm Wishbone from the B6 series. This increases the pivot width +5mm each side (10mm total) and MUST be used in conjunction with the AE #91853 or #91873 73mm Rear Suspension arms. When used in conjunction with AE #91853 or #91873 73mm Rear Suspension arms this retains the original...

Single Piece Carbon Fibre Rear Wing Brace for Team Associated B7. WS Logo Engraved. Manufactured from premium matt finish 2mm Carbon Fibre.

Yokomo YZ2 Front Shock Tower. Replicates original geometry with added half hole shock mounting locations. Manufactured from premium matt finish 4mm Carbon Fibre. Chamfered on both sides.

Yokomo YZ2 Rear Shock Tower. Replicates original geometry with added half hole shock mounting locations. Inside camber link relocated to the shock tower. Optional wing mount heights. Manufactured from premium matt finish 4mm Carbon Fibre. Chamfered on both sides.

Genuine Mugen Spare & Option Parts :-) Replacement for E0135-B

Genuine Mugen Spare & Option Parts :-) Replacement for E0219

Quick note: Motor, lipo battery, tires and servo are not included. Fenix G42 is the very first FWD from Fenix. But for us, G42 is way more than an Rc Car: it’s a journey into a new world, with new boundaries to explore. About 2 years ago we started to discuss about option to step into the “big” field, aka the touring class. FWD was the option to evaluate the field. An...

For rubber and foam tires - on Asphalt or Carpet. Odorless.

Durable, stylish and affordable 1/10th Buggy Wing. Manufactured from 1mm Polycarbonate. Stylish design featuring WS logo formed into back face. Suitable for use with all 1/10th Buggys.

Durable, stylish and affordable 1/10th Buggy Wing. Manufactured from 1mm Polycarbonate. Stylish design featuring WS logo formed into back face. Suitable for use with all 1/10th Buggies.

Willspeed "Osprey" Bodyshell for the Team Associated B7. Low profile, sleek, stylish. Go catch your prey! Manufactured from high quality polycarbonate. Available in Standard (1mm) and Lightweight (0.5mm) material options.

Willspeed "Osprey" Bodyshell for the Team Associated B7. Low profile, sleek, stylish. Go catch your prey! Manufactured from high quality polycarbonate. Available in Standard (1mm) and Lightweight (0.5mm) material options.

Willspeed 13mm Ø Buggy Springs By popular request and result of ongoing testing and development we're happy to release our comprehensive range of 13mm 1/10th off-road buggy springs. No nonsense here, just springs in the rates you require, high quality manufactured in the UK in a bright silver finish. Supplied with colour code heat shrink for easy non-wearing identification....

Genuine Futaba spare parts for your futaba products!

Spare and option parts for your Serpent kit!

Genuine Futaba spare parts for your futaba products!

Genuine spare and option parts from ARC.

Genuine spare and option parts from ARC.

Instruction: 1. Make sure the chassis plate is new with minimized wearing. 2. Loosen the top and lower bulkhead screw by half-tune. 3. Place the chassis on a flat plate. 4. Put the tweak stick set on the upper bulkhead and press down firmly. 5. Use another hand and screw up the top bulkhead. 6. Tight lower bulkhead screws as well.

The new Type S wing fits the GT5 Zonda and GT6 Pista body. It provides more rear traction and better top speed. Made from 1.0mm polycarbonate. Clear, unpainted.

Extended Steering Plate - Set

Body Shell Scissors

Size: 430 x 300 mm Thickness: 19mm Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: TI-30112 Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C. approved.

Size: 540 x 340 mm Thickness: 19mm Suitable for: 1/8 Onroad + GT (not suitable for Truggy) Suitable measuring sticker: TI-30112 Please note - the sticker is also used for the 1/10 board, so it is smaller than the 1/8 board. Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C....

Suitable measuring sticker for Team Titan Setup Boards. Please note - the sticker is used for the 1/10 board as well as the 1/8 board, so it is smaller than the 1/8 board.

Designed for quick and easy camber angle checks the 1-piece gauge allows to measure angles of 0.5, 1.0, 1.5 and 2.0 degree by simply placing the gauge alongside the wheel.

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm