Suitable for 1/10 touring Outer Diameter: 64mm Width: 24mm Hub: 12mm hex

Suitable for 1/10 touring Outer Diameter: 64mm Width: 24mm Hub: 12mm hex

Will fit to any colt transmitter.

Replacement case set - delivered as shown.

ONLY the case set, including decals for 472

Genuine Tamiya Optional Parts.

Charger for 6 cell NiMH battery packs with a charging current of 2 amps and automatic cut-off after charging. With TAMIYA-plug. The LED shows the actually charging status. Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: max 2 A / 8.4 V Battery types: NiMH 6 cells Technical details: - automatic cut off after charging - suitable for NiMH 6 cells...

Genuine Tamiya spares!

Not painted, not cut. Including decal sheet. Only the body. No wheels, no chassis!

Made for use with F104 and F104 foam tires. 14mm hex in the rear, 10mm bearing hub in the front.

Width: 35mm Inner Diameter: 40mm Outer Diameter: 60mm

MADE IN GERMANY - made of 2.25mm graphite. Suitable for XRAY T4 20216 - instead of XRAY 301139

Build your own charging wires!

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushed design

Heavy duty yet lightweight and finished in a custom polished Exotek blue for that factory look. 2x M3x36 5x M3x24

The Tamiya Group C chassis does not include a foam front bumper as standard. As long as the chassis is just on the shelf, this does not play a major role. Unfortunately, when it goes on the track, the front may be stronger because it cannot be cushioned. The tuning front bumper consists of a carbon base that is dimensioned so large that it supports the foam bumper on top of...

Too little attention is often paid to the connectors. Especially with 5mm connectors - but similarly with 4mm connectors - there are always difficulties in handling. Sometimes a connector is too difficult to put in (and then can't be taken out again...), sometimes it sits too loosely. Kawada has taken on all these challenges and developed its OWN connector. Not a part bought...

Too little attention is often paid to the connectors. Especially with 5mm connectors - but similarly with 4mm connectors - there are always difficulties in handling. Sometimes a connector is too difficult to put in (and then can't be taken out again...), sometimes it sits too loosely. Kawada has taken on all these challenges and developed its OWN connector. Not a part bought...

Tires: SOFT Wheels: Square F103, 14mm Hex Hub Tire Diameter: ca. 58mm Tire Width: ca. 44mm Pre-glued - ready to use.

Tires: HARD Wheels: Square F103, 8mm bearing hub Tire Diameter: ca. 56mm Tire Width: ca. 30mm Pre-glued - ready to use.

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Matches the stock geometry for a perfect fit of 4800-6400 shorty packs. Installs using the stock hardware and instructions as well.

Genuine spare and option parts by ARC!

Setscrew allen m4x4 (10 pcs)

Original Serpent Spare Part

Build your own charging wires!

Build your own charging wires!

Genuine spare part for your F1 ULTRA!

Genuine Exotek spare part.

On side of the charger: 4mm plugs + XH 2S On side of the battery: XH 2S

On side of the charger: XT60 + XH 2S On side of the battery: XH 2S

- Lenght: 93.0mm - Height: 18.5mm - Width: 47.0mm - Weight: 163g - 5mm Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect product and consequently out of warranty. NEVER keep your LiPo completely charged...

- Lenght: 93.0mm - Height: 18.5mm - Width: 47.0mm - Weight: 158g - 5mm Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect product and consequently out of warranty. NEVER keep your LiPo completely charged...

- Lenght: 93.0mm - Height: 18.5mm - Width: 47.0mm - Weight: 159g - 5mm Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect product and consequently out of warranty. NEVER keep your LiPo completely charged...

SL8 XLI 2-Speed Gear 61T

Tire width: 25mm Hub: 12mm hex Outer diameter: ca. 54mm

Tire width: 25mm Hub: 12mm hex Outer diameter: ca. 54mm

Scale: 1/10 Mini Hub: 12mm Hex Width 24.5mm Diameter: 42.5mm Set of four pieces.

Scale: 1/10 Hub: 12mm Hex Width 24mm Diameter: 51.5mm Set of four pieces.

Scale: 1/10 Width 24mm Inner Diameter: 51mm Outer Diameter: 65mm Set of four pieces.

Scale: 1/10 for 24mm touring car tires Set of four pieces.

ALLOY TWIST NUTS MEDIUMBLUE LIGHT BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

ALLOY TWIST NUTS RED LIGH BLUE = TAMIYA MEDIUM BLUE = ASSOCIATED, TRAXXAS GOLD = DURANGO ORANGE = HPI, XRAY RED = KYOSHO, TOP RACING

Genuine spare and option parts from BURI Racer!

Suitable for Tamiya Buggies. Size: 60-54-19-24 With 12mm hex hub.