BittyDesign offers now also a GT body for touring cars - with the perfect look! Scale: 1/10 Width: 190mm Wheelbase: 257mm Body is unpainted and not cut. ONLY the body - not a complete car. Small decal sheet (headlights, grill), windows masks and wing included.

Ultra Bearing Set for Tamiya TA-02 (22 pcs) The Set contains: 6 pieces 5x8mm Ball bearing 12 pieces 5x11mm Ball bearing 2 pieces 6x12mm Ball bearing 2 pieces 10x15mm Ball bearing The Ball bearings all have one steal sealed and one rubber sealed side. The rubber sealed side is used for maximum protection from dust and dirt. The steal sealed side is used for maximum...

Ruddog Products 50C LiPo Battery Style: Stick Voltage: 7.4V Capacity: 4000 mAh Constant C Rate: 50C Max Charge C Rate: 2C Length: 133,5mm Width: 45,9mm Height: 23.25mm Weight: about 220g Power Connector: T-Plug Balance Connector: XH

190mm 1/10 GT polycarbonate body and wing set. Exotek is excited to bring you our bold new contender for the highly competitive USGT / GT classes! Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines...

Designed for domination with an aggressive splitter, muscular fenders, low slung hood, downforce inducing side skirts and a sports car cockpit for the most aggressive aero package with minimal drag. The body has 2 trim lines marked on the bottom: 1 for low profile shock towers and the 2nd mark for extra low body mounting on cars such as the A800X. The wing has 2 trim lines:...

WP 1060 - Brushed ESC - 60A Especially made for using two motors! Waterproof! Brushed only. 60A cont. current 2-3S LiPo 6V @ 3A BEC

Spur Gear (by Kimbrough) - 48dp - 66T Will fit to touring cars with 2 or 4 screws (like Tamiya) and also PanCars with a Ball Diff.

Teeth: 14 Pitch: Module M0.6 Motor Shaft Diameter: 3.17mm Teeth Width: 4 mm Gear Length: 9 mm Fixing Screw: M3 locking screw (included) Material: Hardened Steel

Wheel Hex x 2

1966 FORD MUSTANG GT COUPE BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is...

1969 Ford Mustang RTR-X BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is part...

TAKE CARE! The complete batch of this body is having a problem. Small parts of dust between the mould and the polycarbonate deformed the body shell. There are dozends of small bubbles inside the body. There exists no different version of this body. "Take it or leave it", "It's not a bug, it's a feature". 1968 CHEVROLET® CAMARO BODY (200mm/210mm) The body will be delivered...

Will fit only to Protofom VTA Vintage Tires or HPI Retro Tires! Will NOT fit to standard touring car tires!

Will fit only to Protofom VTA Vintage Tires or HPI Retro Tires! Will NOT fit to standard touring car tires!

1966 FORD MUSTANG GT BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is part of...

1970 FORD MUSTANG BOSS 302 BODY (200mm) The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery. Take Care: HPI bodies will show sometimes a slighty sign of dirt during the production process. This may happen and is...

VINTAGE 5 SPOKE WHEEL 31mm BLACK (6mm OFFSET)

Feature: Adjustable Geometry (Front Toe-in/out, Camber) Low friction belt driven 4wd system Flex Cut Lower Chassis for maximum traction Aluminum Layshaft for instantaneous power delivery Compatible with Execute Upgrade Parts Same suspension Geometry as the Competition Grade XQ10 New For the XQ2S: Motor mount area flex adjustment with updated flex plate Low Profile front...

Make sure to get YOUR setup.

Original PSM tuning parts for your RC-Car.

Will fit to any TA-02. Modification might be necessary.

A set of ball bearings should be the first option part for your Tamiya car! You should replace the standard bearings (plastic and metal) before you use your car for the first time. Ball bearings will reduce friction and increase speed and runtime! As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on...

A set of ball bearings should be the first option part for your Tamiya car! You should replace the standard bearings (plastic and metal) before you use your car for the first time. Ball bearings will reduce friction and increase speed and runtime! As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on...

A set of ball bearings should be the first option part for your Tamiya car! You should replace the standard bearings (plastic and metal) before you use your car for the first time. Ball bearings will reduce friction and increase speed and runtime! As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on...

A set of ball bearings should be the first option part for your Tamiya car! You should replace the standard bearings (plastic and metal) before you use your car for the first time. Ball bearings will reduce friction and increase speed and runtime! As a professional racer you should always check and know the conditions of your bearings. You want to be the fastest guy on...

2S 7.4V Hardcase LiPo Battery - 3600mAh 60C

Nominal voltage: 7.4V C-rate: 50C Style: Stickpack Hardcase SubC Style Connector: US-Style T-Plug Dimensions: 134x46x24mm Weight: 210g Balancing connector: XH Application: Hobby & Budget Racer

Nominal voltage: 7.4V C-rate: 50C Style: Stickpack Hardcase SubC Style Connector: US-Style T-Plug Dimensions: 134x46x24mm Weight: 230g Balancing connector: XH Application: Hobby & Budget Racer

1971 Pontiac Firebird Trans Am Clear Body 200mm The body will be delivered unpainted and uncut. Rear Wing, decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

1967 Dodge Dart Clear Body 200mm Length: 438mm Width: 203mm Height: 112mm Wheelbase: 258mm The body will be delivered unpainted and uncut. Decal sticker and windowmasks included. Therefore the pictures are only an example for a painting. Chassis and wheels don´t belong to the scope of delivery.

ZooDiac 190mm GT body shell The ZooDiac GT body shell for 190mm touring cars is ZooRacings latest high performance 1/10th scale on-road body shell and our first go on the popular GT market. The goal was to create a stylish yet efficient body with advanced aerodynamics while still offering a somewhat scale look to ensure the body meets all current GT/USGT class rules. We...

BWOAH 190mm GT LMH body shell The first thing that comes to your mind? BWOAH! ZooRacing is known for creating extraordinary things. BWOAH is meant to fit into this realm as well. The transition between GT and LMH bodies is smooth – BWOAH captures that perfectly. The wheel arches offer enough space to also fit the GT tires with a large diameter. The super slim cabin plays...

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushed design

This set will upgrade your TT-01 to a FDR of 8.62. It's necessary to use a 19T pinion which is mounted in the 20T holes.