Softcase LiPo Battery - for Tamiya Dancing Rider - 3200mAh 2S 7.4V - T-Plug Measure at 57mm x 31mm x 31mm Measure at 57mm x 31mm x 31mm Measure at 57mm x 31mm x 31mm

The newest AM-700995 is specially made to replace the Sanwa M17 original battery which provides more than double capacity of original. With this new battery there's no worry of low in power of your transimitter. Capacity: 3.7V 6000mAh Connector: JR Style with thick 20AWG Silicone Wire / 60mm Size: 78mm(L) x 47mm(W) x 12mm(T) Take care: The M17 standard battery includes an...

Dimensions: 77x27x16mm Weight: 64g

Measure 137mm x 60mm x28mm in size, and only 210g in weight, makes it ideal to fit in any pit-bags. Featuring a very small footprint this DC unit can charge up to 7A and discharge at maximum 1A and can handle all the common types of batteries. A special High Voltage mode had been added to support the new generation of Li-HV batteries. Simple and easy to use manual with LCD...

4mm Male Plugs (2 pcs)

5mm Male Plugs (2 pcs)

Adapter from 5mm to 4mm - for LiPos batteries (2pcs) Total length: 14.5mm

Arrowmax 910012 - MEDIUS - MID Chassis Alu Flex 2.0mm XRAY T4

MID Topdeck Type1 2.0mm XRAY T4

Servo Mount Carbon XRAY T4

MID Chassis Alu 7075 2.0mm XRAY T4

MID Chassis Alu 7075 2.0mm YOKOMO BD9

MID Chassis Carbon 2.25mm YOKOMO BD9

MID Chassis Alu 2.0mm YOKOMO BD9

MID Chassis Alu 7075 2.0mm - FLEX - YOKOMO BD9

2.25mm Carbon Chassis for MEDIUS MID Conversion Kit for Serpent 4X. Requires Arrowmax MID Conversiont Kit AM910005.

MID Topdeck Graphite 2.0mm - Type 1 - Serpent 4X

Belt S3M 348mm F&R (2 pieces)

Motormount MM

Pully Midshaft A

Pully Midshaft B

Pully Midshaft C-Clip (10 pieces)

MID Rear Chassis Stiffener

MID Rear Chassis Stiffener Carbon Top

MID Belt Tensioner

Belt S3M 348mm Rubber White (2 pieces)

The Yokomo FWD version of the #Medius kit is available now! Converts your Yokomo BD9 into a mid-motor FWD kit. Take care: ONLY the conversion kit. It's NOT a complete car. You will need a Yokomo BD9 for this conversion.

The Yokomo FWD version of the #Medius kit is available now! Converts your Yokomo BD10 into a mid-motor FWD kit. Take care: ONLY the conversion kit. It's NOT a complete car. You will need a Yokomo BD10 for this conversion.

MEDIUS - Yokomo BD10 - Carbon Chassis 2.25mm

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

Spare part for FWD Medius kit.

PanCar gear diff set - will fit to current 12-scale PanCars like Awesomatix A12, XRAY X12, Serpent S120 and so on.

Pan Car Gear Diff Shaft (2 pieces)

Pan Car Gear Diff 14T (4 pieces)

Pan Car Gear Diff Drive Shaft

Pan Car Gear Diff Hub

Pan Car Gear Diff Upper Case

1/12 Pan Car Gear Diff Hub

Pan Car Gear Diff Hub Insert

O-Ring 16x1mm (10 pieces)

O-Ring 4.5x1mm (10 pieces)

O-Ring 7x1mm (10 pieces)

Bushing 4x6.5x4mm (1 piece)

Bushing 6.35x8x1.5mm (1 piece)

Bushing 6.35x9.5x5.5mm (1 piece)

Geardiff Set SuperGear 64dp 80T

Alu Extra Flex Chassis Honeycomb including Carbon LiPo Mounts for standard and slim-style batteries and hardware including Honeycomb brass weights that fit perfectly in the chassis cutouts - each 1.7g, 10 pieces are included

Alu Extra Flex Chassis Honeycomb including Carbon LiPo Mounts for standard and slim-style batteries and hardware including Honeycomb brass weights that fit perfectly in the chassis cutouts - each 1.7g, 10 pieces are included

Alu Extra Flex Chassis Honeycomb including Carbon LiPo Mounts for standard and slim-style batteries and hardware including Honeycomb brass weights that fit perfectly in the chassis cutouts - each 1.7g, 10 pieces are included

Serpent X20 - Alu Extra Flex Chassis Honeycomb

XRAY T4 2020 - Alu Flex Chassis Honeycomb

XRAY T4 2020 - Alu Extra Flex Chassis Honeycomb

Yokomo BD10 - Alu Flex Chassis Honeycomb