For 3.175mm shaft diameter.

For 3.175mm shaft diameter.

For 3.175mm shaft diameter.

For 3.175mm shaft diameter.

For 3.175mm shaft diameter.

For 3.175mm shaft diameter.

Spare part for the Carson Virus!

Spare part for the Carson Virus!

Spare part for the Carson Virus!

Spare part for the Carson Virus!

Included: 2 channel 2.4 GHz transmitter, 5-channel receiver and multilingual instructions Features: - Programmable Failsafe PRO+ with undervoltage protection - Dualrate, trim function, Servoreverse - 5 channel receiver - Charging jack - Ball beared control unit for precise steering - Control unit ergonomic adjustable - blue illuminated operation indicator Technical data: •...

Included: 3-channel, 2.4 GHz transmitter, 4-channel mini-receiver, instruction booklet Features: 1. 1 additional switch channel for special functions 2. 15 model memory 3. Servo reverse (reverses the direction of travel) and trim function 4. Dual rate channel 1-2 (limits the servo travel) 5. Ergonomically adjustable control unit 6. Blue backlit LCD display Technical data: •...

Included: 3-channel 2.4 GHz LCD transmitter, waterproof 5-channel BEC receiver, waterproof CS-6 servo and instructions Features: 1. 1 additional switch channel for special functions 2. Two gradually adjustable, fully-proportional channels 3. Servo reverse (reverses the direction of travel) and trim function 4. Dual rate channel 1-2 (limits the servo travel) 5. Ergonomically...

The Reflex X1 can be operated on two continuously adjustable, fully proportional channels. It features a servo reverse for both channels, which reverses the direction of the vehicle to make it easier to control. There is also an adjustable trimmer for the throttle and steering system, as well as an adjustable dual rate function (servo travel limit), allowing you to configure...

2500mAh NiMH Battery USB charger (250mA) 4x 1.5V batteries for transmitter

Features: - Available in 4 colors - 3 channel receiver - Integrated Failsafe - TAMIYA KIT comatible Technical data: - Operating Voltage of transmitter 4,8 up to 6 V - two continuously controllable fully proportional channels - servo reverse for both channels (reversal of the running direction) - trimming function for accelerator and steering - Dual Rate for both channels...

The Reflex X1 can be operated on two continuously adjustable, fully proportional channels. It features a servo reverse for both channels, which reverses the direction of the vehicle to make it easier to control. There is also an adjustable trimmer for the throttle and steering system, as well as an adjustable dual rate function (servo travel limit), allowing you to configure...

The Reflex X1 can be operated on two continuously adjustable, fully proportional channels. It features a servo reverse for both channels, which reverses the direction of the vehicle to make it easier to control. There is also an adjustable trimmer for the throttle and steering system, as well as an adjustable dual rate function (servo travel limit), allowing you to configure...

Technical Details: 4-Channel Receiver Current supply up to 11,1V Measurements: ca. 35x25x10 mm Weight: ca. 10 g

Technical Details: Length: 35mm Width: 20mm Height: 13mm Weight: 6g

Technical Details: 4-Channel Receiver Telemetry Current supply up to 4,8 - 8,4 V Measurements: ca. 35 x 30 x 13mm Weight: ca. 10 g

Operating Voltage: 4.8-6.0V Torque: 3kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Standard type, with plastic gear.

Operating Voltage: 4.8-6.0V Torque: 3kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Low Profile type, with metal gear.

Operating Voltage: 4.8-6.0V Torque: 6kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Low Profile type, with metal gear.

Show your number one car on display! Made for 1:10 touring / offroad cars - adjustable in many ways.

Take care: It's just external - will not influence your charger!

Charger for 6 cell NiMH battery packs with a charging current of 4 amps and automatic cut-off after charging. With TAMIYA-plug. The LED shows the actually charging status. Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: max 4 A / 8.4 V Battery types: NiMH 6 cells Technical details: - automatic cut off after charging - suitable for NiMH 6 cells...

Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: 500 mA / 8.4 V Battery types: 6 cells 7.2 V NiMH Included: Plug charger, manual Technical details: - automatic cut off after charging - suitable for NiMH 6 cells battery 7.2 V - TAMIYA plug

Simple charger for use with LiPo or NiMH cells. Technical details: - Automatic shutdown after charging - Suitable for 2S to 4S LiPo cells - Connection via XT60 charging cable (adapter for Tamiya and T-plug included) - Operation with 220V - 0.5 - 4.0A charging current - NiMH, LiFe, LiHV, and LiPo modes selectable - Universal balancer connector, compatible with XH and EH

Simple charger that charges directly via the balancer connector. Plug it in and you're done. The charger is powered via USB-C. The maximum charging current is 2A - but requires a sufficiently strong power source. If the power supply is too weak, the current is regulated accordingly. Technical details: - Automatic shutdown after charging - Suitable for 2S LiPo batteries -...

Charger for 6 cell NiMH battery packs with a charging current of 2 amps and automatic cut-off after charging. With TAMIYA-plug. The LED shows the actually charging status. Technical data: Input voltage: 100-240 V, 50-60 Hz (AC) Charging current: max 2 A / 8.4 V Battery types: NiMH 6 cells Technical details: - automatic cut off after charging - suitable for NiMH 6 cells...

7.2V - 2700mAh NiMH battery

7.2V - 3000mAh NiMH battery

2S 7.4V Hardcase LiPo Battery - 3600mAh 60C

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushed design

3000mAh NiMH Battery 220V charger 4x 1.5V rechargeable batteries for transmitter Reflex Pro 3 Transmitter Reflex Pro 3 4ch Receiver

Perfect fit for Tamiya 2WD Buggies like Fighter Buggy and Neo Fighter. DT-01, DT-02 and DT-03 - perfect fit! It's not a high competition tire set. It's a cheap - but still good - solution to go through the dirt. It's made for dirt and street at the same time. Scale: 1/10 Diameter: 82mm Tire width front: 22mm Tire width frear: 37mm Hub front: 11mm bearing Hub rear: 12mm hex

Perfect fit for Tamiya 2WD Buggies like Fighter Buggy and Neo Fighter. DT-01, DT-02 and DT-03 - perfect fit! It's not a high competition tire set. It's a cheap - but still good - solution to go through the dirt. It's made for dirt and street at the same time. Scale: 1/10 Diameter: 82mm Tire width front: 22mm Tire width frear: 37mm Hub front: 11mm bearing Hub rear: 12mm hex

Includes: 14pcs 11x5x4mm bearings.

Full Ball Bearing Set for Tamiya TT-01 Chassis

Full Ball Bearing Set for Tamiya TT-02 Chassis

Carson 906000 - Truck Machine - Brushed Motor

Cup Machine / CE4 / CE-4 - Brushed Motor

ESC + Motor + Programming Card - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

Dragster 3 - Tamiya Euro Cup ESC - incl. Programm Card ESC + Programming Card - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

12T - 3700kV - for 2S LiPo - 380W

18T Motor - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

Waterproof! Brushed only. 70A cont. current 2-3S LiPo 6V @ 3A BEC

Just a simple brushless combo for a reasonable price. Made for 2S LiPo batteries. 540er style motor for 1/10.

Suitable for Carson Dragster Turbo ESC to adjust some fine settings. Not necessary for the general setting.

Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 17mm big with this reamer!

Paint Killer

Suitable for 1/10 and 1/8 cars.

Route marking 10x red,10x white, 10cm diameter