Size: 550x405mm Thickness: 10mm Weight: 1640g Suitable for: 1/8 offroad + GT (no truggy!) Suitable measuring sticker: 108760 Please note: It’s impossible to get a 100% flat board made of this kind of wood. HUDY will inspect all boards before shipment – so they are Q.C. approved.

PLASTIC SET-UP BOARD DECAL Size: 545x399mm Suitable for: 1/8 offroad + GT For HUDY board: 108701

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Upside Measure Platte 1:8 Buggy , replacement for Setup System 108805 / 108801

Upside Measure Platte 1:8 Truggy for Setup System 108805 / 108801

Complete Set of Setup Tools + Carrying Bag - For 1/8 Offroad Cars This set includes: 107704 - Chassis Droop Gauge Support Blocks 30mm 1/8 Off-Road - LW (2) 107717 - Chassis Droop Gauge 0 to -13 mm for 1/8 Off-Road 107742 - Ride Height Gauge (20-30mm) 108801 - Universal Exclusive Set-up System for 1/8 Off-Road Cars 108860 - Alu Nut for 1/8 Off-Road System (4) 199241 - Set-Up...

ALU SET-UP WHEEL FOR 1/8 OFF-ROAD (4) Outer diameter: ca. 11,3 cm

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Aluminum shim fits on the rear wheel axle, and the set-up system leans against the shim. For use with XRAY XB4 or any off-road car on which the set-up system cannot be inserted on the non-threaded part. The set-up system will then sit properly on the threaded area of rear wheel axles only. Set of 2.

Upside Measure Plate for 1/10 Off-Road Cars

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 OFFROAD CARS (2WD & 4WD Buggy - like XRAY XB2 and XB4) The set contains: 107701 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) 107763 - Adjustable RIDE HEIGHT GAUGE 108901 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 OFFROAD CARS 199241 - SET-UP BAG FOR 1/10 OFFROAD CARS - EXCLUSIVE EDITION

ALU NUT FOR 1/10 OFF-ROAD SET-UP SYSTEM (4)

ALU SET-UP WHEEL FOR 1/10 OFFROAD BUGGY

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

HUDY 109325 - Alu 1/10 Formula Set-Up Wheel Axle Adapter

UPSIDE MEASURE PLATE FOR 1/10 TOURING CARS

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 TOURING CARS The set contains: 107702 - CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2) 107714 - ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM 107716 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 107880 - CHASSIS BALANCING SIMPLE TOOL (2 PCS.) 109301 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 TOURING CARS 109360 - ALU NUT...

ALU NUT FOR 1/10 TOURING SET-UP SYSTEM (4)

ALU SET-UP WHEEL FOR 1/10 RUBBER TIRES (4)

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

Alu Set Up Wheels 1/10 & 1/12 Adapter

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 & 1/12 PAN CARS The set contains: 107713 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 2-15mm 107715 - RIDE HEIGHT GAUGE BEVELED 1-15mm 107718 - RIDE HEIGHT GAUGE 2.6-5.6mm 107880 - CHASSIS BALANCING SIMPLE TOOL (2 PCS.) 109401 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 & 1/12 PAN CARS 107904 - QUICK-TWEAK STATION 199221 -...

ALU NUT M3 FOR 1/10 & 1/12 PAN CAR SET-UP SYSTEM (2)

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 TOURING CARS The set contains: 107713 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 2-15mm 107715 - RIDE HEIGHT GAUGE BEVELED 1-15mm 107719 - Downstop Gauge 1.9-6.5mm 107880 - CHASSIS BALANCING SIMPLE TOOL (2 PCS.) 109501 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 FORMULA CARS 107904 - QUICK-TWEAK STATION 199221 - SET-UP BAG...

Alu Setup System - for measuring camber, caster and toe. There are different versions available: 108001 - 1:8 Onroad Suitable for cars like XRAY RX8. Does not fit for 1:8 GT (like XRAY GTX8). 108801 - 1:8 Offroad Sutiable for cars like XRAY XB8. XT8 will need a different toe gauge cause of the wider car. 108901 - 1:10 Offroad Suitable for cars like XRAY XB2, XT2, XB4, XT4 or...

UPSIDE MEASURE PLATE FOR 1/8 GT CARS

COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/8 GT The set contains: 107702 - SUPPORT BLOCKS 10mm (2) 107713 - ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE 2-15mm 107718 - RIDE HEIGHT GAUGE 17-30mm 109601 - UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/8 GT 199241 - SET-UP BAG FOR 1/8 CARS - EXCLUSIVE EDITION

CNC-machined premium-quality aluminum set-up wheels for 1/8 GT cars allow for perfectly precise and repeatable set-up adjustment and tweak correction. Eliminates set-up errors inherent in using standard on-road tires. Precision-machined to exacting tolerances, each alu set-up wheel in a set is perfectly matched. Suspension set-up, ride height setting and checking tweak using...

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/10 and 1/8 Onroad diffs and shocks. ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/10 Offroad diffs and shocks. ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Including holes for keeping your diffs when building them. Also an additional and removable holder for shocks is included. Will fit for 1/8 Offroad diffs and shocks (21.3mm hole diameter for the shocks). ONLY the tray with the shock holder. No diff or shock parts inlcuded.

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Professional, ultra-compact work tray for rebuilding diff. CNC-machined from one-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 3 compartments for front, center & rear diffs, which are laser-engraved with labels for easy identification. Machined holes fold the diff outdrives. Machined pockets feature super-thin walls for...

Professional, ultra-compact work tray for rebuilding diff. CNC-machined from one-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 3 compartments for front, center & rear diffs, which are laser-engraved with labels for easy identification. Machined holes fold the diff outdrives. Machined pockets feature super-thin walls for...

Spare part for the HUDY small parts tray 109800 / 109801 / 109802

Professional, ultra-compact work tray for set-up system and tools. CNC-machined from 1-piece aircraft aluminum. Extremely durable and wear resistant due to hard black coating. The parts tray features various compartments for set-up system parts, shock stands, set-up wheels, balancing tools, and other accessories. Perfect for all classes and scales. Rear part of the tray...

Professional, ultra-compact work tray for accessories, Pit LED, and mobile phone. CNC-machined from 1-piece aircraft aluminum. Extremely durable and wear resistant. Black coated. The parts tray features 4 different compartments for accessories & hardware. Middle compartment fits perfectly to #107855 - HUDY Pit LED. Front adjustable bar holds your mobile phone. Machined...

HUDY 111030 - PIN ADAPTER 3.0MM FOR EL. SCREWDRIVER

PIN ADAPTER 3.5MM FOR EL. SCREWDRIVER

LIMITED EDITION - UNIVERSAL HANDLE FOR EL. SCREWDRIVER PINS Suitable for 6.35mm (= 1/4 inches) inserts.

Allen Replacement Tip # 1.5x80mm

REPLACEMENT TIP # 1.5 x 120 MM

LIMITED EDITION - ALLEN WRENCH 1.5 MM

PT ALLEN WRENCH + REPL. TIP 1.5 x 120 MM

HUDY 111571 - POWER TOOL TIP ALLEN 1.5 x 90 MM TAKE CARE: Please do not use this tip for a power tool. We recommend to use it only with a handle. 1.5mm is very small and fragile.

REPLACEMENT TIP # 2.0 x 120 MM

LIMITED EDITION - ALLEN WRENCH 2.0 MM

HUDY 112071 - POWER TOOL TIP ALLEN 2.0 x 90 MM

Allen Wrench Replacement Tip 2.5 x 60 mm

REPLACEMENT TIP # 2.5 x 120 MM

LIMITED EDITION - ALLEN WRENCH 2.5 MM

PT ALLEN WRENCH + REPL. TIP 2.5 x 120 MM - V2

POWER TOOL TIP ALLEN 2.5 x 90 MM

Allen Wrench Replacement Tip 3.0 x 60 mm

Allen Wrench Replacement Tip 3.0 x 120 mm

LIMITED EDITION - ALLEN WRENCH 3.0 MM

PT ALLEN WRENCH + REPL. TIP 3.0 x 120 MM - V2