Our shop exist since 2007 and through the years we've evolved in many ways. With that evolved our look, especially our brand logo. Which logo do you still remember? A small travel through time, showing the evolution of our brand logo. Features: T-Shirt made from 100% cotton round neck fair production Colour: white print from high-quality Direct-to-Film transferprint, front...

Set of two belts - high quality from BANDO. 3x351mm - 117 teeth suitable for XPRESS XQ2S with Mid Motor Mount Conversion Kit, XQ3S, XQ11, XQ10, A800R, X4 and many other cars

RCK goes tire business! RCK-28C MX - exclusively by rc-kleinkram.de! The set contains four tires with indoor inserts. NO RIMS INCLUDED! Tire width: 24mm Fits to: 1/10 touring cars

RCK-KleinSerie and RCK-Challenge - our own racing series in Germany! Features: 148x105 mm sheet clear vinyl, white surface print included Content: One decal sheet as shown.

Technical specs: _ 50A continous current _ >=8.5T limit (onroad) _ 2S LiPo powered _ Brushless sensored or sensorless _ 6V/2A BEC _ Blinky Mode (when used with sensor)

This programming box will allow to fine-adjust the setting of your ESC. Throttle curve, brake curve, operation mode, LiPo cut-off and many more.

Technical specs: _ 540 style _ 3.175mm shaft diameter _ brushless design _ sensorless

needle for superglue / tire glueing - 0.60 x 12mm (10pcs)

brush for tire sidewall glueing (50 pcs)

You race, we care! Features: 280 x 225 mm sheet precut stickers professional stickerfilm, digital printed, easy to place logo colour: black/white each sheet contains 2x Numbers 1-10 sticker size: 50x50mm Content: 10x decal sheet as shown.

You race, we care! Features of the stickers: 280 x 225 mm sheet precut stickers professional stickerfilm, digital printed, easy to place logo colour: black/white each sheet contains 2x Numbers 1-10 sticker size: 50x50mm Content: 10x decal sheet as shown + 3x paper banner (1400x1000mm)

You don't want to use the included headlight inserts? No problem - just use a sticker for the headlight. Oh, wait. Tamiya doesn't include headlight stickers for the 992 GT3... RCK will care ;-)

Spare parts for the RCK "Regler 1" ESC.

Spare parts for the RCK "Regler 1" ESC.

Spare parts for the RCK "Regler 1" ESC.

Spare parts for the RCK "Regler 1" ESC.

The Federvieh is a useful measuring device for anyone who wants to measure the hardness of their springs. Many manufacturers do specify the hardness of their springs - but how can the values ​​of different manufacturers be compared with each other? In practice, not at all. One uses a value in C, another in N/cm, the next just a meaningless color coding. To be able to...

You race, we care! Features: 3.000 x 800 mm printed on one side (latex) PVC Frontlit 510g (B1) incl. eyelets Content: 1x banner as shown.

You race, we care! Features: 3.000 x 800 mm printed on one side (latex) PVC Frontlit 510g (B1) incl. eyelets Content: 1x banner as shown.

You race, we care! Features: 3.000 x 800 mm printed on one side (latex) PVC Frontlit 510g (B1) incl. eyelets Content: 1x banner as shown.

You race, we care! Features: 3.000 x 800 mm printed on one side (latex) PVC Frontlit 510g (B1) incl. eyelets Content: 1x banner as shown.

This set includes: 1x Tamiya 1825161 - Porsche 911 GT1 993 body sheel (without accesoires, not cut, not painted, pre-drilled for TA-03RS) 1x RCK 240145 - rear wing set (white 3d printed material) 1x RCK Decal 1x Window Masks IMPORTANT: There are screws, o-rings, washers or body clips included. The decal set is made by RCK. It's NO Tamiya product and includes neither a Tamiya...

The Tamiya H-Parts 9005522 or 0005638 are not available any more - but we still need them for racing with our beloved Porsche GT1 :-) So what to do? Be creative and make a 3D printed part. Not as easy as it sounds... But here it is! Will for the GT1 car kit 47443 or 58193. Take care: It's still a 3D printed parted. It looks pretty nice - but it's never as good as a injection...

The Tamiya H-Parts 9005522 or 0005638 are not available any more - but we still need them for racing with our beloved Porsche GT1 :-) So what to do? Be creative and make a 3D printed part. Not as easy as it sounds... But here it is! Will for the GT1 car kit 47443 or 58193. Take care: It's still a 3D printed parted. It looks pretty nice - but it's never as good as a injection...

Made for RCK-KleinSerie

Made for RCK-KleinSerie

Made for RCK-KleinSerie

Made for RCK-KleinSerie

RCK goes tire business! RCK-36A XLT - exclusively by rc-kleinkram.de! The set contains four tires with indoor inserts. NO RIMS INCLUDED! Tire width: 24mm Fits to: 1/10 touring cars

RCK goes tire business! RCK-42M.it - exclusively by rc-kleinkram.de! The set contains four tires, pre-glued on white rims. Tire width: 24mm Hub: 12mm hex Fits to: 1/10 touring cars Perfect for indoor and outdoor use.

Fits A800, A800X and A800X Evo. No mid motor kits!

Fits A800, A800X and A800X Evo. No mid motor kits!

You don't want to use the included headlight inserts? No problem - just use a sticker for the headlight. Oh, wait. Tamiya doesn't include headlight stickers for the 956... RCK will care ;-)

Will be used instead of P06-1 and provides a more secured precision and looks very nice (white composite in a black car...!)

You don't want to use the included headlight inserts? No problem - just use a sticker for the headlight. Oh, wait. Tamiya doesn't include headlight stickers for the C11... RCK will care ;-)

Optional parts for the RCK "Regler 1" ESC.

Cuts circles from 10mm to 150mm diameter.

Replacement blades for our compass cutter. Set of 5 - need to be separated with pliers.

The use of an adhesive edge has become indispensable in many classes of 1:10 touring cars on carpet. But what is the best way to apply this adhesive edge? There are many ways. Some of them are easy (in your hand, turning the car or using the trim turned forward) - this one is perfect. Anyone who has never used this tool tends to judge incorrectly. We can say - from our own...

Tamiya Group C Foam Tires from RCK - glued on black Tamiya rims.

Tamiya Group C Foam Tires from RCK - glued on black Tamiya rims.

In most cases, in 2025, preglued wheels will be used - so you can use them (more or less well) already glued out of the bag But there are still classes in which you have to glue the tires yourself. For example, the Porsche Cup in the RCK-KleinSerie - which is essentially what this tool is aimed at. Some people enjoy it - some don't. Those who don't like it - or maybe can't -...