No results were found for the filter!
RC-Mission MI-2RUB-X - Alu Rear Hub Upper Block - 2mm - for XRAY T4 (2 pcs)
Will reinforce your rear upright in a crash situation. At the same time it will raise the ball head like a 2mm shim. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 15x in stock
RC-Mission MI-3S0.5-B20-J - Alu Shims - 3x6mm - 0.5mm thickness - BLUE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 4x in stock
RC-Mission MI-3S0.5-K20-J - Alu Shims - 3x6mm - 0.5mm thickness - BLACK (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 7x in stock
RC-Mission MI-3S0.5-O20-J - Alu Shims - 3x6mm - 0.5mm thickness - ORANGE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 19x in stock
RC-Mission MI-3S0.75-B20-J - Alu Shims - 3x6mm - 0.75mm thickness - BLUE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 7x in stock
RC-Mission MI-3S0.75-K20-J - Alu Shims - 3x6mm - 0.75mm thickness - BLACK (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 15x in stock
RC-Mission MI-3S0.75-O20-J - Alu Shims - 3x6mm - 0.75mm thickness - ORANGE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 11x in stock
RC-Mission MI-3S1.0-B20-J - Alu Shims - 3x6mm - 1.0mm thickness - BLUE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 1x in stock
RC-Mission MI-3S1.0-K20-J - Alu Shims - 3x6mm - 1.0mm thickness - BLACK (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 12x in stock
RC-Mission MI-3S1.0-O20-J - Alu Shims - 3x6mm - 1.0mm thickness - ORANGE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 19x in stock
RC-Mission MI-3S1.5-B20-J - Alu Shims - 3x6mm - 1.5mm thickness - BLUE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 9x in stock
RC-Mission MI-3S1.5-K20-J - Alu Shims - 3x6mm - 1.5mm thickness - BLACK (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 9x in stock
RC-Mission MI-3S1.5-O20-J - Alu Shims - 3x6mm - 1.5mm thickness - ORANGE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 5x in stock
RC-Mission MI-3S2.0-B20-J - Alu Shims - 3x6mm - 2.0mm thickness - BLUE (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 8x in stock
RC-Mission MI-3S2.0-K20 - Alu Shims - 3x6mm - 2.0mm thickness - BLACK (20 pcs)
Inner diameter: 3mm Outer diamter: 6mm
€17.99
*
currently 8x in stock
RC-Mission MI-4RUB-X - Alu Rear Hub Upper Block - 4mm - for XRAY T4 (2 pcs)
Will reinforce your rear upright in a crash situation. At the same time it will raise the ball head like a 4mm shim. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€18.99
*
currently 18x in stock
RC-Mission MI-ALAX01 - Alu Rear Axle - T4 / BD8 / TRF / IF14 / ARC (1 pc)
Super light and super strong. Will fit to the standard rear shaft. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€9.99
*
currently 8x in stock
RC-Mission MI-AM-KR415 - Antenna Mount for KO KR415FHD receiver - BLACK
A short way of the antenna will result in a better range!
€6.99
*
currently 8x in stock
RC-Mission MI-AM-RX491B - Antenna Mount for SANWA RX-491 receiver - BLACK
A short way of the antenna will result in a better range!
€6.99
*
currently 7x in stock
RC-Mission MI-ASH-F - Alu Servo Horn - 25T - FUTABA / SAVÖX - adjustable - 17-20mm - BLACK
Adjustable for 17-20mm length. Clamp design. 25T will fit to Futaba, SAVÖX, MKS and many more. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 12x in stock
RC-Mission MI-ASH-S - Alu Servo Horn - 23T - SANWA / KO - adjustable - 17-20mm - BLACK
Adjustable for 17-20mm length. Clamp design. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 12x in stock
RC-Mission MI-BAB-X - Bulkhead Alignment Block for XRAY T4
Replacement Cross Joints for the RC-Mission shafts. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€49.99
*
currently 8x in stock
RC-Mission MI-BUHB-T420 - Bumper Upper Holder Brace - for XRAY T4 2020
Will reinforce the front / bumper area in case of a crash. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€10.99
*
currently 1x in stock
RC-Mission MI-CFM-30B - Fan Mount for 30mm Fans - BLACK
Keep your fan save! Will fit for 30mm fans.
€6.99
*
currently 7x in stock
RC-Mission MI-CFMR-30 - Fan Mount for 30mm Fans - Rear - BLACK
Keep your fan save! Will fit for 30mm fans.
€6.99
*
currently 4x in stock
RC-Mission MI-CFMR-40 - Fan Mount for 40mm Fans - Rear - BLACK
Keep your fan save! Will fit for 40mm fans.
€6.99
*
currently 1x in stock
RC-Mission MI-CTRY-T1 - Carbon Parts Tray - 223x93x9mm
One of the most stylish way to keep your small parts! Please note: This item is handcrafted. There might be slightly differences from one tray to another. They might also have some small scratches, bubbles or something else. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars!...
€49.99
*
currently 1x in stock
RC-Mission MI-DCJ-A - Replacement Wheel Axle for DCJ - T4 / BD7 (2 pcs)
Replacement parts for MI-DCJ-SX and MI-DCJ-SY RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-DCJ-AY8 - Replacement DCJ Axle - Yokomo (2 pcs)
Will fit to: MI-DCJ-SY8 RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-DCJ-DIF - Replacement DCJ Shafts - SIF / STF (2 pcs)
Will fit to: MI-DCJ-SIF MI-DCJ-STF RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-DCJ-DMTC1 - Replacement DCJ Shafts - MTC1 (2 pcs)
Will fit to: MI-DCJ-SMTC1 RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 3x in stock
RC-Mission MI-DCJ-DX - Replacement Dogbones for DCJ for XRAY T4 (2 pcs)
Replacement parts for MI-DCJ-SX 40.5mm engraved => 51mm XRAY length RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 6x in stock
RC-Mission MI-DCJ-DX-50 - Replacement DCJ Shafts - XRAY 50mm (2 pcs)
Will fit to: MI-DCJ-SXS-50 RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-DCJ-DY - Replacement Dogbones for DCJ for Yokomo BD7 (2 pcs)
Replacement parts for MI-DCJ-SY RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 3x in stock
RC-Mission MI-DCJ-SIF - Double Joint Shaft Set - for Infinity IF14 / Tamiya TRF419 (2 pcs)
Steel Double Joint Shafts for Infinity and Tamiya! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€69.99
*
currently 2x in stock
RC-Mission MI-DCJ-SJC - Strong Joint Case for DCJ Series (2 pcs)
Extra strong DCJ cases. You should use when you have trouble with cracked standard cases. But please take care: For most of the cars it is necessary to modify the c-hub and remove some material. Be careful with that cause you don't want to have a weak c-hub! Suitable for any DCJ version from RC-Mission. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara -...
€14.99
*
currently 3x in stock
RC-Mission MI-DCJ-SMTC1 - Double Joint Shaft Set - for Mugen MTC-1 (2 pcs)
Steel Double Joint Shafts for Mugen! No need to use fragile Aluminum anymore! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€69.99
*
currently 4x in stock
RC-Mission MI-DCJ-STF - Double Joint Shaft Set - for Kyosho TF7 / ARC R11 (2 pcs)
Steel Double Joint Shafts for Infinity and Tamiya! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€69.99
*
currently 2x in stock
RC-Mission MI-DCJ-SX - Spring Steel Double Joint Set for XRAY T4 - 51mm (2 pcs)
High Quality Double Joint Set for the T4! Take care: You will need additional smaller bearings which will replace the standard inner ball bearings of the front knuckle. (5x10x3mm - 2pcs in total) RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in...
€69.99
*
currently 10x in stock
RC-Mission MI-DCJ-SY8 - Double Joint Shaft Set - for Yokomo BD8 (2 pcs)
Steel Double Joint Shafts for Yokomo! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€69.99
*
currently 8x in stock
RC-Mission MI-DCJSA-BD9 - Replacement DCJ Axle - Yokomo BD9 (2 pcs)
Will fit to: MI-DCJ-BD9 RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-DCJSB-BD9 - Replacement Dogbones for DCJ for Yokomo BD9 (2 pcs)
Replacement parts for MI-DCJ-BD9 RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€29.99
*
currently 1x in stock
RC-Mission MI-FPC05-L - Free Cut Polycarbonate Sheet - Carbon Printed - 0.5mm - 180x200mm
Cut whatever you need :-) RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
Content
0.036 Laufende(r) Meter
(€360.83 * / 1 Laufende(r) Meter)
€12.99
*
currently 8x in stock
RC-Mission MI-FPC05-M - Free Cut Polycarbonate Sheet - Carbon Printed - 0.5mm - 80x130mm
Cut whatever you need :-) RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€5.99
*
currently 8x in stock
RC-Mission MI-FPC08-L - Free Cut Polycarbonate Sheet - Carbon Printed - 0.8mm - 180x200mm
Cut whatever you need :-) RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
Content
0.036 Quadratmeter
(€360.83 * / 1 Quadratmeter)
€12.99
*
currently 4x in stock
RC-Mission MI-FPC08-M - Free Cut Polycarbonate Sheet - Carbon Printed - 0.8mm - 80x130mm
Cut whatever you need :-) RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€5.99
*
currently 8x in stock
RC-Mission MI-FRS - 1:10 Touring - Fender Repair Set (4 pcs)
Suitable for 1/10 touring. We recommend to use a special glue like HUDY 106280 (body fix). RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€5.99
*
currently 3x in stock
RC-Mission MI-FSAC-M - Front Solid Axle Steel Cup Joint - for MTC-1 (2 pcs)
Will replace A2203, A2231 or A2232 Double cut - will be used only without blades. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 2x in stock
RC-Mission MI-FSAC-X - Front Solid Axle Cup Joint - Steel - w/o Blades for XRAY T4 (2 pcs)
Will be used without blades. Made with two pairs of cutouts - just turn one step ahead when it should be worn out. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 4x in stock
RC-Mission MI-FSAC-XUL - Front Solid Axle Cup Joint - Alu - Ultra Light Type - for XRAY T4 (2 pcs)
Will replace 305135 305136 or 305137 Available in an ultra strong (steel) or ultra light (alu) version. We recommend alu for the pro drivers and steel for the hobby drivers! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured...
€16.99
*
currently 5x in stock
RC-Mission MI-FSAC-XV2 - Front Solid Axle Cup Joint - Steel - with or w/o Blades for XRAY T4 (2 pcs)
Can be used with or without blades. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 4x in stock
RC-Mission MI-HCDB-BD9 - Alu Rear Shaft - 44mm - for Yokomo BD9 (1 pc)
Super light and super strong. Will fit to the standard rear axle. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 10x in stock
RC-Mission MI-HCDB-IF - Alu Rear Shaft - for Infinity IF14 (1 pc)
Light and strong! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 2x in stock
RC-Mission MI-HCDB-M - Replacement Shaft - for Mugen MTC1 (1 pc)
Will fit to: MI-HCRDS-MS The blade is not longer available as replacmet part (MI-SHCB-M), but you can use XRAY 305242 instead of the RC-Mission part. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for...
€17.99
*
currently 7x in stock
RC-Mission MI-HCDB-T - Alu Rear Shaft - 48mm - for Tamiya TRF419X / TA-07 (1 pc)
Super light and super strong. Will fit to the standard rear axle. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 8x in stock
RC-Mission MI-HCDB-X - Alu Rear Shaft - 44mm - for Yokomo BD7 / BD8 (1 pc)
Super light and super strong. Will fit to the standard rear axle. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€16.99
*
currently 2x in stock
RC-Mission MI-HCP-W - Optional Pistons for PGI / PGI-Y (4 pcs)
Will fit to: MI-PGI MI-PGI-Y The set includes FOUR pistons. Will fit also to XRAY 308039. XRAY PSS: Hard Aggressive MI-HCP-W: Middle Aggressive Standard RC-Mission: Soft Aggressive RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly...
€16.99
*
currently 5x in stock
RC-Mission MI-HCRDS-BD9 - HC Rear Drive Shaft Set - for Yokomo BD9 (2 pcs)
HC (= hard coated) drive shafts. Very light, very strong. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€49.99
*
currently 2x in stock
RC-Mission MI-HCRDS-IF14 - Alu Rear CVD - for Infinity IF14 (2 pcs)
Light and strong! RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€59.99
*
currently 2x in stock
RC-Mission MI-HCRDS-MS - HC Rear Drive Shaft Set - for Mugen MTC-1 (2 pcs)
HC (= hard coated) drive shafts. Very light, very strong. RC-Mission is a brand by Hara Design. The company of Toshihiko Hara - the designer of some popular and competetive Hot Bodies and Tamiya touring cars! Designed and produced in Japan. Proudly manufactured in Japan stands for high quality products!
€49.99
*
currently 1x in stock