For 23mm shock bodies and 21mm shock shaft. The LCG front shock tower was developed for the use with the Team Associated B6.1 and B6.2 shock absorbers. The result is an overall lower centre of gravity which helps to increase corner speeds on high-bite surfaces such as carpet, astro turf and prepped clay. Machined from high-quality carbon fibre and featuring a reinforced...

For 27.5mm shock bodies and 27.5mm shock shaft. The LCG front shock tower was developed for the use with the Team Associated B6.1 and B6.2 shock absorbers. The result is an overall lower centre of gravity which helps to increase corner speeds on high-bite surfaces such as carpet, astro turf and prepped clay. Machined from high-quality carbon fibre and featuring a reinforced...

Brass Rear Chassis Brace Support (30g)

Asso B74 - Aluminium Differential Case (Front/Rear)

Aluminium Bellcrank Set

Fan Mount (30/40mm)

Fan Mount (30/40mm) with 30mm RuddogProducts HV Fan

Aluminium Rear Shock Tower

Aluminium Steering Plate

+5mm Aluminum Rear Shock Mount Set

Aluminium Servo Arm Set - 23 T Servo Arm 1: Overall length: 26mm Hole Distance: 18mm Servo Arm 2: Overall length: 43mm Hole Distance 2-A: 15mm Hole Distance 2-B: 19mm Hole Distance 3-A: 10,5mm Hole Distance 3-B: 19,5mm Hole Distance 3-C: 18,5mm

Aluminium Servo Arm Set - 25 T Servo Arm1: Overall length: 26mm Hole Distance: 18mm Servo Arm 2: Overall length: 43mm Hole Distance 2-A: 14,5mm Hole Distance 2-B: 18,5mm Hole Distance 3-A: 10,5mm Hole Distance 3-B: 14,5mm Hole Distance 3-C: 18,5mm

Features: Lower Center of Gravity less pressure on the rear less wind resistance

Precisely machined carbon fibre stiffeners brace the body mounts against the impacts of involuntary tough landings, thus reducing stress on the polycarbonate body. As a side effect, body clips tend to stay in place much better, which aids to solve another regular issue.

Increases the stiffness in the length of the car without changing the torsion The steering will be more precise and predictable Graphite Front Brace and hardware are included Specifications: 7075 T6 Aluminum 2.5mm material for more stiffness, to reduce weight it has been milled down to 1.5mm fits Team Associated B74.1 and B74 Content: 2.5mm Chassis Plate 2.0mm Graphite...

Front Anti-Roll Bar Set Hard (1.5/1.6/1.7mm)

The wheelbase of the Associated T6.2 gets strechted by 4mm with this chassis, which suits the common tracks with lots of grip. The chassis improves the driving characteristics on high-grip tracks such as carpet or turf. The car will be faster and easier to handle. On top of that the chassis has been developed to fit the newest generation of servo mounts. Next to the chassis...

The one piece design of the solid axle does not weigh more than the standard differential, despite of it being made from solid steel. Features: - ultimate forward drive - unchanged rotating mass at improved durability Specifications: - high-grade black anodised steel - one-piece design

Features: - Option to easily adjust rear toe-in and anti-squat - Original Team Associated #92014 pill inserts included Specifications: - High-grade black-anodised aluminium - machined silver edge details - laser-engraved for cool factory looks - compatible with the full range of B6 series pill inserts - direct fit for Team Associated DR10, RB10 and ProSC10 2WD

Aluminum Fan Mount

Aluminum Clamping Servo Arm 23 T

Aluminum Clamping Servo Arm 25 T

The shock towers heavy duty design matches the stock geometry but increases durability, suspension efficiency and precision. It is a direct replacement and does not require any setup modifications.

Countersunk holes guarantee perfect fit of the mounting screws and the mounting tab gives you just enough space to install your transponder while limiting weight to a minium. Being stiffer than the kit plastic kit part, the carbon brace eliminates unwanted flex and ensures that your servo remains where it is supposed to be under stress.

Aluminum Suspension Mount D - wide - black

Brass Suspension Mount C - Wide - 11g

Ultra Shock Piston 13mm 3x1.6mm - 2mm (2 pcs)

Ultra Shock Piston 13mm 3x1.7mm - 2mm (2 pcs)

Ultra Shock Piston 13mm 2x1.6mm and 2x1.2mm (2 pcs)

Ultra Shock Piston 13mm 2x1.7mm and 2x1.3mm (2 pcs)

Ultra Shock Piston 13mm 2.0mm (2 pcs)

Associated B6.4 - Aluminium Bellcrank Set

Associated B6.4 - Aluminium Steering Plate

Brass ESC Mounting Plate - 44g

The design has been improved to create more stability and reliance. With that the risk of brakage has been reduced.

Includes: 2.5mm Aluminium Chassis 2.0mm Carbon Brace Hardware

Fits most 1/10 and 1/8 onroad and offroad nitro models. Can be used thightly mounted to secure the setscrew of the reso even further, or can be used "floating" to bring more flexibility.

Fits most 1/8 Buggys such as Asso RC8B4, Mugen MBXR or XRAY XB8. Made from high quality aluminum - the set includes 4x 0.5mm and 4x 1.0mm shims, which are open on one side. This design allows for a quick de- and montage as well as a change. So you can easily change the toe and width of the car.

Fits 1/8 Brushless Motors with a 40mm diameter. Can hold 30mm and 40mm fans.

Fits the OS 21J and therefore as well the AD3, Protek RC Samurai RM and Flash FP02 Engines. Perfekt fixation for the rubber seal.

Fits the OS 22E and therefore as well the B21 Ongaro, B2104, REDS and Ruddog RNX22.3 Engines. Perfekt fixation for the rubber seal.

Plates made from carbon fiber, each weighs 0,7g. Tape already installed for an easy montage.

Plates made from carbon fiber, each weighs 1,5g. Tape already installed for an easy montage.

Made for 6mm body posts. Preinstalled tape for installation on the body. Total weight of the set: 0,5g.

Made for 5mm body posts. Preinstalled tape for installation on the body. Total weight of the set: 0,5g.

Made for 7-8mm body posts. Preinstalled tape for installation on the body. Total weight of the set: 0,5g.

Associated B7 - Carbon Bulkhead Shim Set (0.5mm/1.0mm)

Associated B7 - Carbon HD Front Shock Tower

Associated B7 - Carbon HD Rear Shock Tower

Associated B7 - FMP Motor Plate Carbon

Associated B74 - CF Wing Plate

XRAY XB2/XB4 - CF Wing Plate

Schumacher LD3 - CF Wing Plate

Carbon Fiber Battery Mount (1 pair)

Ultra Titan Turnbuckle - 3.5x48mm (6 pcs)

Ultra Titan Turnbuckle - 3.5x48mm (6 pcs)

Ultra Titan Turnbuckle - 3.5x48mm - Markus Kaerup Edition

Titanium Upper Shock Mount Screw (4 pcs)

Titanium Lower Shock Mount Screw - Set

1/8 Titanium Droop Screw M4x12mm (4 pcs)