Features: Dual auxiliary power leads Durable case with aluminum heat sink Water-resistand and dust proof Precision throttle, reverse and brake control adjustable brake and throttle functions (requires program card RE27034) LiPo low-voltage protection heavy-duty silicone wires Low-resistance T-plug connectors Bullet motor connectors Specifications: Cells: 2-3 LiPo, 5-9 NiMH...

With the PROgrammer2, select between Forward/Brake or Forward/Brake/Reverse mode and adjust the BEC output voltage depending on the type of servo used and desired servo speed. Adjust the desired low voltage cutoff or disable it completely. The temperature at which the ESC cuts motor power due to overheating can also be adjusted or disabled. Reversing the rotation of the...

Replacement Connection wire for the 510R 1S ESC

Input (V): 6.0V - 7.4V Speed (sec/60°), 6.0V: 0.14 Speed (sec/60°), 7.4V: 0.12 Torque (kg-cm), 6.0V: 6.0 Torque (kg-cm), 7.4V: 7.0 Dimensions: 40.8x20.1x38.0mm Weight (g): 52g Spline: 25

Input (V): 4.8 - 8.6 Motor: Brushless Speed (sec/60deg.) 6.0V: .148 Speed (sec/60deg.) 7.4V: .133 Speed (sec/60deg.) 8.4V: .118 Torque (kg-cm/in-oz) 6.0V: 37.2/517 Torque (kg-cm/in-oz) 7.4V: 44.2/614 Torque (kg-cm/in-oz) 8.4V: 50.1/696 Dimensions (mm): 40 x 20 x 37.5 Weight (g): 82 Spline: 25

50mm Servo Wire Extension - black

75mm Servo Wire Extension - black

125mm Servo Wire Extension - black

175mm Servo Wire Extension - black

A high-performance microprocessor, specialized operating software, and many advanced features make it the perfect charging solution for new hobbyists, casual enthusiasts, or hardcore racers. Simultaneous charging of two batteries at up to 14A is possible thanks to a powerful integrated power supply. Storage of up to 10 different charge profiles (per channel) allows for easy...

When using the 1S TX Charge Lead Adapter in conjunction with a TX charge lead (fe RE27235) you can charge a 1S TX battery with the Reedy 1416-C2L charger in 1S balance mode.

20g - 94x46x>0.6mm 34g - 94x46x1.0mm ​50g - 94x46x1.5mm

29g - 136x46x0.6mm 39g - 136x46x0.8mm ​48g - 136x46x1.0mm

Nominal voltage: 7.6V C-rate: 130C Style: Stick Hardcase Connector: 5mm tubes Application: 1:10 Size: 139x47x25.1mm Weight: ca. 318g Max. Charge Rate: 16.4A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 7.6V C-rate: 130C Style: ULP Stick Hardcase Connector: 5mm tubes Application: 1:10 Size: 139x47x19.5mm Weight: ca. 245g Max. Charge Rate: 12.0A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged...

Nominal voltage: 7.6V C-rate: 90C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x25.1mm Weight: ca. 225g Max. Charge Rate: 12.8A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 15.2V C-rate: 90C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:8 Size: 99x47x48.2mm Weight: ca. 445g Max. Charge Rate: 12.6A Content: 1x battery, 1 pair of 5mm plugs, 1x wire XH-4S, 1x adapter 5mm to T-Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo...

Grip Bullet Connectors feature an elevated grooved top to aid in removal of the plug from the corresponding socket.

Grip Bullet Connectors feature an elevated grooved top to aid in removal of the plug from the corresponding socket.

Nominal voltage: 7.6V C-rate: 90C Style: LP Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x20mm Weight: ca. 165g Max. Charge Rate: 9.6A Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect...

6.0 - 8.4V input voltage 24000 rpm @ 8.4V 30x30x10mm size 8g weight

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Diameter: 35.9mm Length: 50.3mm Shaft Diameter: 3.15mm Weight: 160-170g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Low-resistance, silver-plated solder tabs Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet Adjustable timing Completely rebuildable Competition proven Built to ROAR/EFRA/IFMAR specs

Sonic 540-SP5 Titanium Motor Screw Set 3x M2.5x6mm 3x M2x45mm

Diameter: 35.9mm Length: 52.5mm Shaft Diameter: 3.15mm Weight: 147-151g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet

Diameter: 35.9mm Length: 52.5mm Shaft Diameter: 3.15mm Weight: 147-151g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet

Diameter: 35.9mm Length: 52.5mm Shaft Diameter: 3.15mm Weight: 147-151g Cells: 1-2S LiPo CNC-machined lightweight can Aluminum end cap Lightweight design Optimized air cooling Dual precision ball bearings Balanced rotor High-strength magnet

Sonic 540-SP5 Sensor Board

Sonic 540-SP5 Motor Screw Set

Diameter: 40.0/42.5mm Length: 65.0mm Shaft Diameter: 5.0mm Weight: 323g +/-3g Cells: 4-6S LiPo Features: Heavy-duty CNC machined can Integrated heat sink Dual precision ball bearings High-torque, balanced 4-pole rotor Neodymium magnets Heavy-duty solder tabs 5mm shaft Adjustable timing Competition proven 200mm sensor wire Built to ROAR specs

Diameter: 40.0/42.5mm Length: 65.0mm Shaft Diameter: 5.0mm Weight: 323g +/-3g Cells: 4-6S LiPo Features: Heavy-duty CNC machined can Integrated heat sink Dual precision ball bearings High-torque, balanced 4-pole rotor Neodymium magnets Heavy-duty solder tabs 5mm shaft Adjustable timing Competition proven 200mm sensor wire Built to ROAR specs

Diameter: 40.0/42.5mm Length: 75.0mm Shaft Diameter: 5.0mm Weight: 409g +/-3g Cells: 4-6S LiPo Features: Heavy-duty CNC machined can Integrated heat sink Dual precision ball bearings High-torque, balanced 4-pole rotor Neodymium magnets Heavy-duty solder tabs 5mm shaft Adjustable timing Competition proven 200mm sensor wire Built to ROAR specs

Trucker Hat, Flat Bill silver/black

Trucker Hat, Curved Bill charcoal/black

Suitable for charging 1S or 2S batteries. Stepped bullet connectors are compatible with batteries that use 4mm or 5mm sockets. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional protection and a professional appearance while positive ends are clearly marked to prevent...

Suitable for charging 4S batteries. Compatible with batteries that use 5mm sockets. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional protection and a professional appearance while positive ends are clearly marked to prevent reverse polarity.

The ideal solution for charging receiver batteries through the balance lead instead of unplugging the battery to charge. An extra-long length of 80cm offers added convenience for nitro racers. Works with TX batteries too. Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional...

If your stable includes a variety of vehicles that use differing cell counts, these leads are for you. After selecting the correct cell-count setting, simply connect the main plug and then plug the battery's balance lead into the appropriate balance connector to charge. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during...