ESC RX Cable Black 60mm (fits RP120 and others) Unfortunately you don't see in the first picture that there are two plugs (see third picture). The second picture shows the cable in use. We won't deliver a ESC or fan.

ESC RX Cable Black 120mm (fits RP120 and others) Unfortunately you don't see in the first picture that there are two plugs (see third picture). The second picture shows the 60mm cable in use. We'll deliver the 120mm cable. We won't deliver a ESC or fan.

ESC RX Cable Black 40mm (fits RP120 and others) Unfortunately you don't see in the first picture that there are two plugs. The second picture shows the 60mm cable in use. We'll deliver the 150mm cable. We won't deliver a ESC or fan.

ESC RX Cable Black 40mm (fits RP120 and others) Unfortunately you don't see in the first picture that there are two plugs. The second picture shows the 60mm cable in use. We'll deliver the 40mm cable. We won't deliver a ESC or fan.

ESC RX Cable Black 40mm (fits RP120 and others) Unfortunately you don't see in the first picture that there are two plugs. The second picture shows the 60mm cable in use. We'll deliver the 90mm cable. We won't deliver a ESC or fan.

Aluminium Offset Servo Horn 25T Black The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T black The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 25T orange The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T orange The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Horn 25T Blue The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T blue The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Horn 25T Red The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Offset Servo Arm 23T red The RUDDOG Aluminium Offset Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 16mm...

Aluminium Servo Horn 25T Black The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Arm 23T black The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Arm 25T orange The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Arm 23T orange The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Horn 25T Blue The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Arm 23T blue The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

Aluminium Servo Arm 23T red The RUDDOG Aluminium Servo Arm does not only look good, it also gives you the quality you are looking for. Made out of high-strength 7075-T6 aluminium, it is strong enough to give you a precise steering feel. The servo arm features also an additional screw to clamp to horn onto the servo for maximum security. Distance A: 15mm Distance B: 19mm...

"Glitch Buster" Receiver Voltage Stabilizer

Compared to standard plastic fans the aluminum case increases the stiffness and therefore the durability, which is key for high temperatures. Specially developed for ESC. Features: Aluminum Case Ultra High Speed Double bearing includes M3x14mm screws Specifikation : Voltage: 6.0 to 8.7 V Measurements: 25 x 25 x 10mm Mounting holes: Standard 20mm distance Weight: 10.1g...

Compared to standard plastic fans the aluminum case increases the stiffness and therefore the durability, which is key for high temperatures. Specially developed for ESC. Features: Aluminum Case Ultra High Speed Double bearing includes M3x14mm screws Specifikation : Voltage: 6.0 to 8.7 V Measurements: 31 x 31 x 10mm Mounting holes: Standard 24mm distance Weight: 13.5g...

Compared to standard plastic fans the aluminum case increases the stiffness and therefore the durability, which is key for high temperatures. Specially developed for ESC. Features: Aluminum Case Ultra High Speed Double bearing includes M3x14mm screws Specifikation : Voltage: 6.0 to 8.7 V Measurements: 36 x 36 x 11mm Mounting holes: Standard 29mm distance Weight: 14.9g...

The RC215 500W Dual Channel LiPo Battery DC Charger is a compact and powerful device that allows to charge up to two battery packs simultaneously with up to 15A of charge current. When used in the combined ASYNC mode, a maximum of 25A of charge current is possible. The DC charger can be used with 1S to 6S LiHV/LiPo, 1 to 16 cell NiMH or 1S to 10S batteries and it works with...

Specifications & features: Input voltage: 100-240V AC; 7-28VDC, max. 30A Integrated 200W power supply Battery type: LiHV/LiPo/LiIon 1-6S, NiMH 1-16S, Pb 1-10S Charge power: 0.1-15A (max. 250W per channel in SYNC mode), 0.2-25A (max. 500W both channels combined in ASYNC mode) Discharge power: 0.1-3A (max. 12W per channel), 0.1-15A (max. 250W per channel in Recycle mode)...

The RCL3609 HV Coreless Standard Servo perfectly suits the speed and torque requirements of 1/8th and 1/10th scale racing. With a beautifully machined, black anodized full aluminium case, it is ready to withstand the rigors of racing and matches the look of modern race kits and accessories, and precise steering operation is ensured. Speaking of mounting the servo, tidy...

RCL1706 / RCL3609 - Gear Set

Features: 32 bit processor exchangeable receiver cables state-of-the-art FET technology integrated on/off button developed for modified and stock racing strong and sensitive brake heat-dissipating solder posts Specifications: Continuous current: 160 A Burst current: 760 A Voltage range: 2S LiPo / 6.0 - 8.7 V Motor limit: over 4.5T (540 size) BEC: adjustable 6.0 / 7.4 V...

Program Card for the RXS ESC. With the program card the ESC can be modified to fit the own personal needs. With an microSD-card (not included) the firmware can be updated. The program card comes with a box.

Features 3 different modi for every oportunity (Drag Race, Track Race, Flying Mode) build-in flash memory 1M (up to 50 datasets) build-in rechargable LiPo battery, around 5 hours of capacity recorded data can be analysed with the app GPS-coordinates uses metric or british measuring free App for iOS 9.0 or Android 5.0 and higher Technical data: Receiver: L1, 1575.42 MHZ...

Features: 65 W Power regulatet temperature span from 180 to 480° C changeable soldering tips big display Input Voltage: 100-240V Dimensions station: 128x104x79mm Dimensions handle: 128x66x79mm Weight: 0.7kg

Fits the RSI60 Soldering Iron as well as the RSS65 Soldering Station. Includes five different soldering tips.

Whether traction compound is an option or not, a tire heating system helps you to achieve the best performance from your tires starting lap one. Fits 1/8 GT Onroad and Offroad Specification: Main Unit Size: 124x107x51mm Input Voltage: 12-18V (8A) Temperature range: 20-80°C/68-176°F (depending on surrounding temperature) Weight Unit: 370g Belts: Width: 60mm Length: 250-400mm

Whether traction compound is an option or not, a tire heating system helps you to achieve the best performance from your tires starting lap one. Fits 1/10 Touring Car Tires. Specification: Main Unit Size: 124x107x51mm Input Voltage: 12-18V (8A) Temperature range: 20-80°C/68-176°F (depending on surrounding temperature) Weight Unit: 370g Cups: Inner diameter: 64mm Depth: ca. 30mm

NO STATION INCLUDED!! Fits Ruddog Products RP-0644-TC tire heating system for 1/10 touring cars Inner diameter: 64mm Depth: ca. 30mm

NO STATION INCLUDED!! Fits Ruddog Products RP-0644-18 tire heating system for 1/8 GT Onroad and Offroad Belts: Width: 60mm Length: 250-400mm

Features: 60 W Power regulatet temperature span from 180 to 480° C changeable soldering tips Celsius and Fahrenheit display (changeable) LED-display Sleep mode Wire length: 1.5mm

The RUDDOG RCL1308 HV Low-Profile Coreless Servo is perfectly suited for demanding RC racing scenarios and features a lightweight plastic housing combined with a sturdy aluminum center section. Its coreless motor offers fast response times and high efficiency. This servo delivers precise actuation and outstanding forces, ensuring consistent control even in intense racing...

Experience the power and precision of the RUDDOG RBL1407 HV Low-Profile Brushless Servo for your RC touring car. Tailored for the 1/10 touring car class, this servo combines performance with reduced mass thanks to its lightweight plastic housing. The central part of the housing is made of aluminum for improved cooling, and features a distinctive RUDDOG laser engraving. The...

Boost the performance and precision of your RC touring car with the RUDDOG Racing RR1406 HV Low Profile Brushless Servo. Designed specifically for the demands of 1/10 touring car racing, this servo delivers the power and speed you need. With a completely CNC machined aluminum body and a sleek black anodized finish, this servo combines design with functionality. The RUDDOG...

Features : Coreless High Speed Servo Lightweight plastic housing with central aluminum part Laser-engraved RUDDOG logo on the aluminum section Spline: 25T Dimensions: 40.0x20.0x37.8mm Weight: 65.1g Operating speeds: 0.082s @6.0V | 0.074s @7.4V | 0.065s @8.4V Stall torque: 15kg @6.0V | 18kg @7.4V | 20kg @8.4V Voltage range: 4.8 - 8.4V Motor type: Coreless Gear type: Metal...

Features : Coreless High Torque Servo Lightweight plastic housing with central aluminum part Laser-engraved RUDDOG logo on the aluminum section Spline: 25T Dimensions: 40.0x20.0x37.8mm Weight: 65.1g Operating speeds: 0.160s @6.0V | 0.145s @7.4V | 0.135s @8.4V Stall torque: 26kg @6.0V | 29kg @7.4V | 32kg @8.4V Voltage range: 4.8 - 8.4V Motor type: Coreless Gear type: Metal...

Features : The allrounder Lightweight plastic housing with central aluminum part Laser-engraved RUDDOG logo on the aluminum section Spline: 25T Dimensions: 40.0x20.0x37.8mm Weight: 65.8g Operating speeds: 0.073s @6.0V | 0.063s @7.4V | 0.054s @8.4V Stall torque: 16kg @6.0V | 19kg @7.4V | 22g @8.4V Voltage range: 4.8 - 8.4V Motor type: Brushless Gear type: Metal Cable length:...

Features : Specifically developed for the 1/10 offroad classes, like 4wd buggy, 2wd buggy and truck CNC-machined aluminum housing, black anodized with silver chamfers Laser-engraved RUDDOG Racing logo IP67 Waterproof Magnetic Hall Sensor Spline: 25T Dimensions: 40.9x20.2x29.4mm Weight: 61.8g Operating speeds: 0.089s @6.0V | 0.080s @7.4V | 0.067s @8.4V Operating torque: 26kg...

Features : Perfect for all applications that demand the highest torque, such as 1/8th off-road classes. CNC-machined aluminum housing, black anodized with silver chamfers Laser-engraved RUDDOG Racing logo IP67 Waterproof Magnetic Hall Sensor Spline: 25T Dimensions: 40.1x20.0x37.4mm Weight: 79.5g Operating speeds: 0.112s @6.0V | 0.105s @7.4V | 0.083s @8.4V Operating torque:...

25mm ESC Cooling Fan A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can fail from one day to another, sometimes without showing a definite reason. With a very unlucky bump, especially in offroad use, it sometimes only...

30mm ESC Cooling Fan A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can fail from one day to another, sometimes without showing a definite reason. With a very unlucky bump, especially in offroad use, it sometimes only...

35mm Aluminum HV Fan Specially designed for 4WD Buggies, such as Associated B74 or XRAY XB4. The form of the fan includes a mount, so you can directly mount the fan in your RC Car. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car...

The RUDDOG RR492 is a powerful 2.4GHz 4-channel FH5 receiver that has been specially developed for compatibility with selected latest generation Sanwa remote controls. The RR492 is the ideal choice for anyone looking for an affordable but high quality alternative Receiver for their Sanwa remote control. The RR492 is compatible with the Sanwa transmitters M17, MT-5 and MT-R...

Fits the Ruddog Products RCL1308 Servo.

Fits the Ruddog Products RBL1407 Servo.

Fits the Ruddog Products RR1406 Servo.

- Sanwa compatible - FHSS-4 and FHSS-3 - SHR and SSR Mode - SSL Telemetry possible - Works with: Sanwa M17 Sanwa M12S Sanwa M12S-RS Sanwa M12 Sanwa M11X Sanwa MT-44 Sanwa MT-4S Sanwa MT-4 Sanwa MT-S Sanwa EXCES ZZ Sanwa EXCES Z

Fits the Ruddog Products RCL1807 Servo.

Fits the Ruddog Products RCL2914 Servo.

Fits the Ruddog Products RBL1906 Servo.

Fits the Ruddog Products RR3008 Servo.

Fits the Ruddog Products RR4210 Servo.

The RC230 Dual Channel LiPo Battery DC Charger is a powerful and versatile charger that allows you to charge up to two battery packs simultaneously with up to 30A of charge current. In the combined SYNC mode, a maximum charge current of 50A is possible. The DC charger can be used with 1S to 8S LiHV/LiPo, 1 to 20 cell NiMH, or 1 to 15 cell Pb batteries and operates with an...