For 3.175mm shaft diameter.

Double Sided Tape, clear (25mm x 1m)

3mm Washer Set (0.5 / 1.0 / 2.0mm) black

3mm Washer Set (0.5 / 1.0 / 2.0mm) blue

3mm Washer Set (0.5 / 1.0 / 2.0mm) light blue

3mm Washer Set (0.5 / 1.0 / 2.0mm) orange

3mm Washer Set (0.5 / 1.0 / 2.0mm) red

LiPo Charging Bag (180x80x80mm)

4S Battery Hook & Loop Strap (2 pieces) Lenght Strap: ~270mm (Length Loop: ~185mm; Length Hook: ~90mm) Width Strap: ~20mm

Aluminium Shock Cap with Honeycomb Membrane

Cable Management Shrink Wrap - 40x24mm (5 pieces)

Tire Glue Thin 20g Warning Ethyl-2-cyanoacrylate Hazard Note H335 may cause respiratory irritation. Safety Note P261 Avoid breathing vapours. P271 Use only outdoors or in a well-ventilated area. P312 Call a POISON CENTER / doctor /?/ if you feel unwell. P405 Store locked up. P501 Inhalt/Behälter gemäß lokalen/nationalen Vorschriften der Entsorgung zuführen. EUH202 Dispose of...

Tire Glue Medium 20g Warning Ethyl-2-cyanoacrylate Hazard Note H335 may cause respiratory irritation. Safety Note P261 Avoid breathing vapours. P271 Use only outdoors or in a well-ventilated area. P312 Call a POISON CENTER / doctor /?/ if you feel unwell. P405 Store locked up. P501 Inhalt/Behälter gemäß lokalen/nationalen Vorschriften der Entsorgung zuführen. EUH202 Dispose...

Glue Curved Steel Tips Thin (10 pieces)

Glue Curved Steel Tips Thin (10 pieces)

Glue Flexible Tips Medium (10 pieces)

Glue Flexible Tips Thin (10 pieces)

Thread Lock Medium - Blue - 15g

The 1/8 Nitro Offroad Starter Box is of a universal design for all 1/8 offroad needs. Housed in a sturdy, black-coated aluminium case the heavy-duty starter box is powered by two 775-size motors with a durable belt-driven starter wheel, allowing for an easy and convenient start of both runned-in and also brand-new nitro engines. The starter box was developed for the use with...

Fuel Bottle 500ml

Made in Japan - the high-quality Turbo-style glow plug offers exceptional low to middle-range power and quicker response to throttle inputs, allowing for quicker spool up and also more stable idling.

P4 Turbo Glow Plug - Super Hot (1 piece)

Overall length: 205mm Bristel length: 35mm

Adhesive Hook and Loop Tape - 8mmx50cm

Adhesive Hook and Loop Tape - 5x18cm

The Tire Cutter is the ideal tool for off-road tire modifying such as pin and block tread cutting. The ultra-sharp side cutter pliers allow to precisely remove unneeded pins of off-road tires, making tire tweaking a breeze. The pliers are made of high-quality steel and precision sharpened for a long life and pinpoint cutting. Black anti-slip handled ensure safe and...

Outer measurements: ca. 150x150x65mm Inner measurements without foam: ca. 140x140x55mm Measurements foam insert: engine height ca. 95mm

Features High quality materials and workmanship Durable zip with RUDDOG logo Fits most 1/10 2wd and 4wd buggies Pocket for adress, business card or model type Specifications Size: 39x28x10cm Fits: 1/10 2wd and 4wd Buggy

Features The upper compartement features six places to put your screwdrivers. Those are 20cm long and 4cm wide. It also has three compartements for screwdrivers or smaller tools, which are 20cm long and 4,5cm wide. Least it has a zip compartement which is 9,5cm wide and can take small items. The lower compartement can be sectioned individual using the dividers (or not)....

Features High quality materials and workmanship Durable zip Fits most 1/10 Touring Cars Pocket for adress, business card or model type Specifications Size: 46x22x12cm Fits: 1/10 touring cars

The scissors have an overall length of 17cm, the blades are 7.5cm long. Thanks to a black Titanium-Nitrite-Coating the scissors cut through polycarbonate as well as tire inlays and thin decals. The soft grip offers a safe handling and don't hurt the fingers. Features: Durable, straight construction Sharp blades Usable even with thicker polycarbonate Overall length: ca. 170mm

The Curved Scissors for RC Bodies are the perfect addition to any tool box. Their sharp blades ensure easy body shell preparation with the curved design making wheel arch cutting a breeze. The black handles ensure effortless handling and protection to the fingers. Also great for precise sticker cutting. Features: Durable, curved construction Sharp blades Usable even with...

The Multi Turnbuckle wrench is a 1-stop solution for virtually every RC car out there. The tool is usable with 3mm, 4mm, 5mm, 5.5mm, 7mm and 8mm turnbuckles as well as nuts, steering posts, shock mounts, and many more. Its sturdy metal construction lasts a long time while laser-engraved size markings ensure quick identification of the correct tool size. Features: Durable...

Spare magnets for Bittydesign and Arrowmax Body Marker Tools. The magnets are very strong and fragile. Take care when getting them in contact with each other. A broken magnet will be the result if you are not paying enough attention.

Content: Hex Drivers: 1.5mm | 2.0mm | 2.5mm | 3.0mm | 3.5mm | 4.0mm Nut Drivers: 4.0mm | 5.0mm | 5.5mm | 7.0mm | 8.0mm Cross Head: 00 | 0 | 1 size Flat Head: 2.0 | 3.0 | 4.0 size Spanner: 5mm | 8mm Ratcheting Rubber Handle

Additive Bottle with Sponge Applicator - 75ml (1 piece) No additive included.

Practical pliers set including transportation case.

Ball Bearing Oil - 10ml

Drivetrain Oil - 10ml

The tips are 100mm long and can be replaced. The handles come with a practical marking for easy identification of the size.

The tips are 100mm long and can be replaced. The handles come with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip is 100mm long and can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip can be replaced. The handle comes with a practical marking for easy identification of the size.

The tip can be replaced. The handle comes with a practical marking for easy identification of the size.

Replacement Tip - 100mm long - 3mm width

Replacement Tip - 100mm long - 3mm width

Replacement Tip - 100mm long - 3mm width

Replacement Tip - 100mm long - 3mm width

Replacement Tip - 100mm long - 3mm width

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: 33mm (table till car stand area) Width: 108mm (Platform for the car) Length: 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm Weight: 177g

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: 62mm (table till car stand area) Width: 115mm (Platform for the car) Length: 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm Weight: 290g

The new infrared thermometer uses a classic TO-4 thermopile sensor. This sensor is build from 116 little thermoelements with an active surface of 545 µm diameter on a silicium chip. The sensorelement absorbes the energy and creates with that the output signal. Depending on the surface, the measured figure can vary even with the same temperature. Therefore the thermometer can...

The Hobby Knife Set includes a variation of handles and blades for many kinds of materials.

Spare blades for the Ruddog Hobby Knife or similar ones.