Program Box for Toro ESC - with LCD Screen SkyRC Program Box is a very sophisticated electronic device that controlled by high performance microprocessor. With compact size and easy operation, SkyRC Program Box offers six-in-one functions: 1. ESC Setting 2. PC Interface - Link ESC to PC 3. Input PPM Signal Monitor 4. Servo Tester 5. Motor KV/RPM Tester 6. LiPo Battery...

Battery Checker "LipoPal" - for LiPo 2-6s - with LCD Display Functions: There are two functions of this compact device: 1.Battery Checker The LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage %. 2.Self Voltage Balancer This program can equalize the individual voltages to their lowest one. Balance operation automatically...

Brushless Engine Analyzer / Tester Special Feature: There is NO ESC needed for this engine tester! Features: Input Voltage: 7.4 - 8.4V (Suggested to use 7.4V 2S 1P LiPo Battery) LCD Display Screen: Blue Backlight Background, White Text, 16 Characters X 2 Lines KV Value Accuracy +/-3% Motor Timing Accuracy: +/-4% Motor Timing Range: 0-70° Noise Level Measurement Range: 60dB -...

Features 3 different modi for every oportunity (Drag Race, Track Race, Flying Mode) build-in flash memory 1M (up to 50 datasets) build-in rechargable LiPo battery, around 5 hours of capacity recorded data can be analysed with the app GPS-coordinates uses metric or british measuring free App for iOS 9.0 or Android 5.0 and higher Technical data: Receiver: L1, 1575.42 MHZ...

Check your ball or gear diff hardness - for 1/10 touring or offroad cars with 7mm wheel nut. Take care: This tool will not show you a value of your used oil viscosity. It just shows a value which can be compared between two diffs. A higher number means a harder diff. Different devices will show different values - even if the same diff is measured. You need to compare always...

In order to optimally coordinate a car that can be driven in a balanced way in all situations, a computer-controlled weighing system is essential. SKYRC's Bluetooth Corner Weight System can help achieve just that. The system measures the weight on each individual axis on the model. Thus, it pretty much reflects the existing weight distribution of the racing car on each wheel...

Charging lead. The total lenght is 25cm.

Charging lead. The total length is 25cm.

Power Switch - 4-12V 10Amp - LiPo and NiMh SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate theproblems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your...

Multi Balancer Board - 2-6 Cells - XH, EH, HP/PQ, TP/FP Including the balancer wire to connect the board with the charger.

Tyre Heater Belt for 1:8 GT / Rallygame Will fit to all popular tire heating systems (like Xceed, MuchMore, SkyRC...). Take care: NO heating station included. NO tires included. ONLY ONE pair of belts. Basic station is needed!

Tire Warmer "Racing Star" RSTW with temperature control Special Features Front & Rear temperature can be set independently Temperature of 4 tires is controlled by MCU Removable front & rear tire warmers 8 different beep tones Celsius - Fahrenheit selectable display Four LED indicators Safety timer There are two DC inputs, one is on the leftt side of the Tire Warmer the other...

Technical Data: Diameter: 65mm Inner diameter: 64mm Wirelength: 480mm Weight: 75g Usage: 1/10 touring car suitable for: SkyRC tyre heater Racing Star RSTW (SK600064-04) Take care: NO heating station included. NO tires included. ONLY ONE pair of cups. Basic station is needed!

Tire Warmer "Racing Star" RSTW with temperature control Special Features Front & Rear temperature can be set independently Temperature of 4 tires is controlled by MCU Removable front & rear tire warmers 8 different beep tones Celsius - Fahrenheit selectable display Four LED indicators Safety timer There are two DC inputs, one is on the leftt side of the Tire Warmer the other...

Engine Heater SkyRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It helps relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starterbox. Fuel consumption is much less, as you do not have to...

GC401-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience. The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you chose. It will also precisely maintain car direction regardless of the amount...

SkyRC 600069-06 - Aluminium Setup Wheels (4) - BLACK

Aluminium Setup Wheels (4) - BLUE

To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners. Scope of Supply: 2x...

Aluminium Chassis Droop Gauge - 4.0 - 6.6mm - BLACK Technical Data: Measurement range: 4 - 6,6mm Step: 0,2mm

Aluminium Chassis Droop Gauge - -3.0 - 10.0mm - BLACK Technical Data: Measurement range: -3.0 - 10.0mm Step: 1mm

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 1x hole for motor placement during soldering Technical Data: Height: ca. 30mm (table till car stand area) Width: ca. 105mm (Platform for the car) Length: ca. 165mm (Platform for the car) Diameter of the holes for the shocks: ca. 13mm Diameter of motor hole: 54x33mm

Features: 4x Holes for Shocks 4x Rubber feet on the bottom 2x Rubber Anti-Slip Stripes on the car stand area 2x magnetic surfaces for small parts 1x hole for motor placement during soldering Technical Data: Height: ca. 60mm (table till car stand area) Width: ca. 105mm (Platform for the car) Length: ca. 165mm (Platform for the car) Diameter of the holes for the shocks: ca....

SkyRC SK600089BK - SkyRC Led Pit Light Black SKYRC pit light features convenient sensitive controls with adjustable light color and brightness / dimming. This pit light employs clean, stress free lighting LED technology that eliminates the harsh whites of fluorescent making it ideal for general illumination. The light incorporates 32 high-power LEDs and uses 11 watts or less...

This very small multi-port distributor features 3x DC output ports which support banan connector (4mm) and alligator clip. 2x 5V/2.1A USB ports which support smart phone and other devices. The DC input power lead is changeable. Input Voltage: 6-18V Max. Current: 10A USB Power: 5V/2.1A Dimensions: 63.7x44x22.5mm Weight: 46g

The SkyRC Bluetooth Dongle creates a wireless connection between a SkyRC charger and the smartphone. This gives You convenient access to all functions and settings of the SkyCharger app. Thanks to the upgrade of the Bluetooth version from 4.2 to 5.0, range, speed and more have been greatly improved. In order to be able to use the dongle, it only has to be connected to the...

Tyre Rubber Sander Features: Rubber tire sander for touring class Powerful high torque DC motor with dual metal bearings Light-weight aluminum case Quiet operation Technical Data: Dimension (LXWXH): 138 x 73 x 70mm Input Voltage: DC 6V-12V Minimum Input Current: 10A Case Material: Aluminum Power Supply Cable: Silicon Cable with Banana Plug