Alu Servosaver for WR-02 Chassis. Fits Tamiya 51000 and 50473 High Torque Servosaver. Incl. 5mm Ball-Nuts/Screws/3mm Spacer

Now you can choose between two gear ratios (10.5:1 and 9.7:1). The speed will be greater but the acceleration a bit slower.

inkl. hardware and adjustable suspension

inkl. hardware and adjustable suspension

incl. steel wheel axles, king pins and 5mm ball connectors

incl. steel wheel axles, king pins and 5mm ball connectors

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

Square Alloy Spacer - available in many different colours and sizes.

The set saves about 42% of weight compared to the standard steel screws. Titanium 13x 3x8mm Flathead 10x 3x10mm Flathead 1x 3x14mm Flathead 2x 3x16mm Flathead 5x 3x5mm Buttonhead 7x 3x6mm Buttonhead 43x 3x8mm Buttonhead 2x 3x10mm Buttonhead 8x 3x14mm Buttonhead 2x 3x18mm Buttonhead 5x 3x20mm Buttonhead 5x 3x23mm Buttonhead

The set saves about 42% of weight compared to the standard steel screws. Titan: 3x 3x8mm Flathead 4x 3x10mm Flathead 10x 3x8mm Buttonhead 5x 3x23mm Buttonhead Aluminium: 10x 3x8mm Flathead 6x 3x10mm Flathead 1x 3x14mm Flathead 2x 3x16mm Flathead 5x 3x5mm Buttonhead 7x 3x6mm Buttonhead 33x 3x8mm Buttonhead 2x 3x10mm Buttonhead 8x 3x14mm Buttonhead 2x 3x18mm Buttonhead 5x...

Titan: 1x 3x6mm CS 28x 3x8mm CS 7x 3x10mm CS 2x 3x6mm BH 6x 3x6mm BH 3x 3x40mm BH Aluminium: 3x 3x16mm CS 11x 3x6mm BH 51x 3x8mm BH 14x 3x10mm BH 2x 3x12mm BH 5x 3x18mm BH All screws are with 2mm hex and M3 thread.

7 pcs 3x8mm Countersunk 5 pcs 3x10mm Countersunk 8 pcs 3x12mm Countersunk 2 pcs 3x25mm Countersunk 13 pcs 3x6mm Buttonhead 32 pcs 3x10mm Buttonhead 5 pcs 3x12mm Buttonhead 10 pcs 3x15mm Buttonhead 12 pcs 3x20mm Buttonhead

7 pcs 3x8mm Countersunk 5 pcs 3x10mm Countersunk 8 pcs 3x12mm Countersunk 2 pcs 3x25mm Countersunk 13 pcs 3x6mm Buttonhead 32 pcs 3x10mm Buttonhead 5 pcs 3x12mm Buttonhead 10 pcs 3x15mm Buttonhead 12 pcs 3x20mm Buttonhead

Length: 5mm Socket: 1.5mm Hex Made for spur gears with 3.0mm hole diameter.

Will fit to 6mm body posts.

Will fit to 6mm body posts.

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 21.6mm (L)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 21.6mm (L)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 18.6mm (M)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 18.6mm (M)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 16.6mm (S)

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering.

Fits Tamiya 50473 and 51000 High Torque Servo Saver

Fits Tamiya 50473 and 51000 High Torque Servo Saver

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

Tamiya - Aluminum Flange Pipe (4 pieces)

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The POM ring replaces the springs on the Tamiya Servo Saver and creates a more precise steering. At the same time the ring does not influence the geometry of the servo as planned by Tamiya. This can happen with a stiff arm. POM dampens a bit due to its rigidity. Therefore it can work as a saver in some ways. But with this ring you'll take away the main reason for a servo...

Overall length: 10mm M3 thread

With this set you can use your 380 motor in a car that requires a 540 size. The different mounting options allow to use different pinion brands. The set also includes an adapter sleeve to bring the 2mm shaft to 3.175mm.

With this set you can use your 380 motor in a car that requires a 540 size. The different mounting options allow to use different pinion brands. The set also includes an adapter sleeve to bring the 2mm shaft to 3.175mm.

fully compatible with Tamiya 51253 and thus fits TRF416/417/418/419 and many more 6 pcs. (front) with a overall length of 110mm and diameter of 6mm 2 pcs. (rear) with a overall length of 90mm and diameter of 6mm Bottom part is formed as hexagon (7mm size) incl. 4 body mount plates

Fits all Tamiya 5mm Ball Connectors Will be mounted on the side, where the opening is larger 8 + 8 pcs. Pitch from Ball-Center till end: SS (10mm) // M (14mm) Overall length: SS (14mm) // M (18mm)

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter

Steel pinion for 1:10 motor with 3.17mm shaft diameter