low friction material minimises friction in the front suspension Grey balls will be used on the underside of the car, the dark grey balls on the upper side. Fits also the Tamiya MB-01 - in this case please swap the mounting directions.

The knuckles are a direct replacement for Tamiya 51332 and offer a new ackermann hole for optimized steering. They are very stiff for more precise steering. Bearing size: 5x10x4mm The C-Hubs have a 5° caster and offer more steering in neutral range, but less steering in higher turning angles. They are very stiff for more precise steering.

Will protect your suspension from heavy impacts.

6mm wide Fits all Tamiya Wheels with 12mm hex hubs pins and screws also included fits all Tamiya Chassis with 5mm diameter of the wheel axle (e.g.. TT-01, TA-04, TA-05, TB-02, TRF415, TB Evo3, TB Evo4, TB Evo5, TRF 501X and more) Content of the package: 4 pcs.

6mm wide Fits all Tamiya Wheels with 12mm hex hubs pins and screws also included fits all Tamiya Chassis with 5mm diameter of the wheel axle (e.g.. TT-01, TA-04, TA-05, TB-02, TRF415, TB Evo3, TB Evo4, TB Evo5, TRF 501X and more) Content of the package: 4 pcs.

10mm width compatible to all Tamiya wheels with 12mm hex hubs replaced STD-12W (new item number) pins and screws also included fits all Tamiya Chassis with 5mm diameter of the wheel axle (e.g.. TT-01, TT-02, TA-04, TA-05, TB-02, TRF415, TB Evo3, TB Evo4, TB Evo5 and more) colour of the aluminum looks exactly like the original Tamiya aluminum-parts-colour (like TRF415, TB...

10mm width compatible to all Tamiya wheels with 12mm hex hubs replaced STD-12W (new item number) pins and screws also included fits all Tamiya Chassis with 5mm diameter of the wheel axle (e.g.. TT-01, TT-02, TA-04, TA-05, TB-02, TRF415, TB Evo3, TB Evo4, TB Evo5 and more) Content of the package: 2 pcs.

Special Drift Steering Crank.

For TT-02.

Tamiya TT-02B Aluminum Front Upright (2 pieces)

This Set contains: 8x M3x8mm Buttonhead Screw 39x M3x10mm Buttonhead Screw 7x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 7x M3x10mm Countersunk Screw In total 65 screws.

This Set contains: 7x M3x5mm Buttonhead Screw 8x M3x8mm Buttonhead Screw 37x M3x10mm Buttonhead Screw 1x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 2x M3x18mm Buttonhead Screw 9x M3x10mm Countersunk Screw In total 68 screws.

Will lock the TT-02 Gear Diff

Save some weight!

Save some weight!

Titanium is 42% lighter than steel. All screws are made of durable titanium. This Set contains: 9x M3x10mm Countersunk Screw 7x M3x5mm Buttonhead Screw 8x M3x8mm Buttonhead Screw 37x M3x10mm Buttonhead Screw 1x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 2x M3x18mm Buttonhead Screw In total 68 screws. Weight savings compared to the original screw set: 16,6g

7x M3x10mm CS 2x M3x14mm CS 1x M3x6mm BH 8x M3x8mm BH 31x M3x10mm BH 4x M3x12mm BH 2x M3x15mm BH 2x M3x23mm BH Saves about 14,5g compared to the original screws.

This Set contains: 8x M3x8mm Buttonhead Screw 39x M3x10mm Buttonhead Screw 7x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 7x M3x10mm Countersunk Screw In total 65 screws.

Made for TT-02R

This Set contains: 7x M3x5mm Buttonhead Screw 8x M3x8mm Buttonhead Screw 37x M3x10mm Buttonhead Screw 1x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 2x M3x18mm Buttonhead Screw 9x M3x10mm Countersunk Screw In total 68 screws.

Save some weight!

Save some weight!

Titanium is 42% lighter than steel. Alu even 65% lighter! All screws are made of durable titanium. This Set contains: Alu: 7x M3x5mm Buttonhead Screw 6x M3x8mm Buttonhead Screw 29x M3x10mm Buttonhead Screw 1x M3x12mm Buttonhead Screw 4x M3x15mm Buttonhead Screw 2x M3x18mm Buttonhead Screw Titan: 9x M3x10mm Countersunk Screw 2x M3x8mm Buttonhead Screw 8x M3x10mm Buttonhead...

Alu: 1x M3x6mm BH 6x M3x8mm BH 25x M3x10mm BH 4x M3x12mm BH Titan: 7x M3x10mm CS 2x M3x14mm CS 2x M3x8mm BH 6x M3x10mm BH 2x M3x15mm BH 2x M3x23mm BH Saves about 19,9g compared to the original screws.

4x M3x8mm CS 5x M3x10mm CS 3x M3x12mm CS 12x M3x8mm BH 31x M3x10mm BH 4x M3x12mm BH

4x M3x8mm CS 5x M3x10mm CS 3x M3x12mm CS 12x M3x8mm BH 31x M3x10mm BH 4x M3x12mm BH Saves about 14,1g compared to the original screws.

Save some weight!

4x M3x8mm CS 5x M3x10mm CS 3x M3x12mm CS 12x M3x8mm BH 31x M3x10mm BH 4x M3x12mm BH

Save some weight!

Save some weight!

Need additonal gear diff outdrives for metal drive shafts.

Steel sealed, made in Japan! 4x 8x12x3.5mm 4x 5x11x4mm 8x 5x10x4mm

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.