Tamiya GF-01 - Aluminum C-Hub Carrier (2 pcs)

Tamiya GF-01 - Aluminum C-Hub Carrier (2 pcs)

Tamiya GF-01 - Aluminum C-Hub Carrier (2 pcs)

Tamiya GF-01 - Aluminum C-Hub Carrier (2 pcs)

Metall sealed bearings for the GF-02. Includes 32 pieces of 1150 bearings (5x11x4mm)

Turnbuckle made from aluminum. Wrench width: 4.0mm Fits f.e. Tamiya Hornet

Turnbuckle made from aluminum. Wrench width: 4.0mm Fits f.e. Tamiya Hornet

Turnbuckle made from aluminum. Wrench width: 4.0mm Fits f.e. Tamiya Hornet

Turnbuckle made from aluminum. Wrench width: 4.0mm Fits f.e. Tamiya Hornet

3-Hole Variant with M3 thread Fits Tamiya kits with High-Torque Servo Saver

3-Hole Variant with M3 thread Fits Tamiya kits with High-Torque Servo Saver

Material: Steel M3 ISO Thread with 2mm Hex-Head I suggest using a high-quality hex-wrench (e.g. Hudy, Tamiya, Robitronic, Takumi, ...) Contents of this Set: Steel 6x 3x6mm Countersunk Head Screw 4x 3x6mm Button Head Screw 36x 3x8mm Button Head Screw 8x 3x10mm Button Head Screw 1x 3x12mm Button Head Screw 4x 3x15mm Button Head Screw 4x 3x25mm Button Head Screw Fits Tamiya...

including silver alu nuts - don't overtighten those

Short and light axle shaft set for the non driven axle incl. 4 low height wheel nuts Also included: Alu Hex Hub 6mm Fits MB-01 and BT-01

Oiled bearings 12x 1050 - 5x10x4mm 4x 850 - 5x8x2.5mm 2x 1280 - 8x12x3.5mm

The screws are 23,8g lighter than the original used steel screws. They have a 2mm hex and M3 thread. Flathead: 36x 3x6mm 2x 3x8mm 5x 3x10mm 6x 3x12mm Roundhead: 4x 3x5mm 22x 3x6mm 29x 3x8mm 5x 3x10mm 6x 3x12mm 4x 3x14mm

The screws are 33,7g lighter than the original used steel screws. They have a 2mm hex and M3 thread. Titanium: Flathead: 36x 3x6mm 5x 3x10mm 4x 3x12mm Roundhead: 2x 3x6mm 2x 3x8mm 4x 3x12mm 4x 3x14mm Alloy Blue: Flathead: 2x 3x8mm 2x 3x12mm Roundhead: 4x 3x5mm 20x 3x6mm 27x 3x8mm 5x 3x10mm 2x 3x12mm

Tamiya T3-01 - Differential Joint Cover (2 pieces)

Reduces backlash and requires to use hexagonal hubs (not included).

Reduces backlash and requires to use hexagonal hubs (not included).

Reduces backlash and requires to use hexagonal hubs. The hubs are 8mm thick. Comes with the M4 nuts.

Reduces backlash and requires to use hexagonal hubs. The hubs are 8mm thick. Comes with the M4 nuts.

Carbon chassis extension for WR-02 Chassis (+40mm Wheel base)

Alu Servosaver for WR-02 Chassis. Fits Tamiya 51000 and 50473 High Torque Servosaver. Incl. 5mm Ball-Nuts/Screws/3mm Spacer

Alu Servosaver for WR-02 Chassis. Fits Tamiya 51000 and 50473 High Torque Servosaver. Incl. 5mm Ball-Nuts/Screws/3mm Spacer

Alu Servosaver for WR-02 Chassis. Fits Tamiya 51000 and 50473 High Torque Servosaver. Incl. 5mm Ball-Nuts/Screws/3mm Spacer

Now you can choose between two gear ratios (10.5:1 and 9.7:1). The speed will be greater but the acceleration a bit slower.

inkl. hardware and adjustable suspension

inkl. hardware and adjustable suspension

incl. steel wheel axles, king pins and 5mm ball connectors

incl. steel wheel axles, king pins and 5mm ball connectors

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 21.6mm (L)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 21.6mm (L)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 18.6mm (M)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 18.6mm (M)

Made from very strong resin. Fits 5mm Tamiya ball heads. Length: 16.6mm (S)

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering.

Fits Tamiya 50473 and 51000 High Torque Servo Saver

Fits Tamiya 50473 and 51000 High Torque Servo Saver

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The alu arm replaces the composite part from the Tamiya High Torque Servo Savers 51000 and 50473. This creates more stability, stiffness and precision of the steering. Unlike the original Tamiya part, this arm offers again the three mounting holes.

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The ball heads have the standard Tamiya 1/10 size of 5mm - Pay Attention: This is Tamiya standard, the ball itself is smaller but is called 5mm). Included are M3 set screws with a length of either 8mm or 15mm, so you can build different lengths of pillow balls.

The POM ring replaces the springs on the Tamiya Servo Saver and creates a more precise steering. At the same time the ring does not influence the geometry of the servo as planned by Tamiya. This can happen with a stiff arm. POM dampens a bit due to its rigidity. Therefore it can work as a saver in some ways. But with this ring you'll take away the main reason for a servo...

Overall length: 10mm M3 thread

With this set you can use your 380 motor in a car that requires a 540 size. The different mounting options allow to use different pinion brands. The set also includes an adapter sleeve to bring the 2mm shaft to 3.175mm.

With this set you can use your 380 motor in a car that requires a 540 size. The different mounting options allow to use different pinion brands. The set also includes an adapter sleeve to bring the 2mm shaft to 3.175mm.

fully compatible with Tamiya 51253 and thus fits TRF416/417/418/419 and many more 6 pcs. (front) with a overall length of 110mm and diameter of 6mm 2 pcs. (rear) with a overall length of 90mm and diameter of 6mm Bottom part is formed as hexagon (7mm size) incl. 4 body mount plates

Fits all Tamiya 5mm Ball Connectors Will be mounted on the side, where the opening is larger 8 + 8 pcs. Pitch from Ball-Center till end: SS (10mm) // M (14mm) Overall length: SS (14mm) // M (18mm)