This swing shaft reduces weight about 60%. Please use it only in the rear - cause it may be deformed by heavy collision.

Genuine Tamiya parts!

Genuine Tamiya parts!

Alu Shims Set - 3mm / 5.5mm - SILVER & BLUE (24 pcs)

Clamp Type Alu Wheel Hub (6mm Thick - 4 pcs)

Clamp Type Alu Wheel Hub (4mm Thick - 4 pcs)

Genuine Tamiya spare and optional parts!

Genuine Tamiya spare and optional parts!

Genuine Tamiya optionals!

Genuine Tamiya spare and optional parts!

Damper Oil Seal (4 pcs)

Genuine Tamiya spares!

Only for use with 53339

Suitable for 1:10 touring 24mm width Set of two pieces.

3mm Shim Set (3 types / 10pcs each)

4mm Shim Set (3 types / 10pcs each)

5mm Shim Set (3 types / 10pcs each)

10mm Shim Set (3 types / 10pcs each)

Genuine Tamiya spare and optional parts!

Tamiya M-Chassis Optional Parts!

Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.

Low Friction 5mm Adjuster (8 pcs)

Turnbuckle Wrench

Damper Set

Inner Diameter: ca. 13mm Length: ca. 21mm TIPP: We recommend to use those springs with the XPRESS cars XQ1S, XM1S, FM1S and FT1S. The standard XPRESS springs with the same dimension are not produced anymore. Tamiya is a very good decision! XPRESS spring rates in N/cm: Kit - 15.5 Black - 11.3 White - 9.7 Blue - 8.5 Yellow - 7.0 Rot - 6.0 Tamiya spring rates: white - 13.1 blue...

Inner Diameter: ca. 13mm Length: ca. 21mm TIPP: We recommend to use those springs with the XPRESS cars XQ1S, XM1S, FM1S and FT1S. The standard XPRESS springs with the same dimension are not produced anymore. Tamiya is a very good decision! XPRESS spring rates in N/cm: Kit - 15.5 Black - 11.3 White - 9.7 Blue - 8.5 Yellow - 7.0 Rot - 6.0 Tamiya spring rates: white - 13.1 blue...

Inner Diameter: ca. 13mm Length: ca. 21mm TIPP: We recommend to use those springs with the XPRESS cars XQ1S, XM1S, FM1S and FT1S. The standard XPRESS springs with the same dimension are not produced anymore. Tamiya is a very good decision! XPRESS spring rates in N/cm: Kit - 15.5 Black - 11.3 White - 9.7 Blue - 8.5 Yellow - 7.0 Rot - 6.0 Tamiya spring rates: white - 13.1 blue...

Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.

Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.

Genuine Tamiya Optional Parts.

Tie-Rod Set

Smoth differential movement function promise higher traction during cornering.

Cool down - especially for the TT-01!

Spur gear set

Metal Motor Mount

Rear Upright with more Toe-In.

Now it's possible to modify the camber of your car!

Alu Bumper Stopper

Front Foam Bumper

Genuine Tamiya spare and optional parts!

540 size 23 turns 7.2V input voltage 26.500rpm 500gf-cm torque

Low Friction Suspension Balls

6mm Shim Set (3 types / 10pcs each)

Genuine Tamiya Optional Parts.

High precision design universal shaft ensures no loss of speed making turns, enabling smooth cornering.

Will increase the rear toe-in give a more easy to drive car during cornering.

Genuine Tamiya spare and optional parts!

If you want to use your TT with metal shafts and the ball diff you need those outdrives.

Genuine Tamiya spare and optional parts!

Genuine Tamiya spare and optional parts!

Genuine Tamiya spare and optional parts!

Clamp Type Alu Wheel Hub (5mm Thick - 4 pcs)

Genuine Tamiya Spares.

Special motor heat sink has more and longer fins than ordinary heat sinks increasing effectiveness. Motor cling-hole features slit to allow air entry. Both heat sink and motor plate feature blue anodized aluminum for snazzy finish. Set includes: •heat sink x1 •motor plate x 1

Set of 8 front and rear springs to be used with CVA damper to allow suspension adjustments to suit road conditions. Soft type are red, hard type are blue for easy recognition. Set includes: •Front springs (2 each, soft and hard) •Rear springs (2 each, soft and hard)

5mm Adjuster Wrench

For 1:10 touring cars

Ball diff set provides limited slip effect, improving mobility and traction while enabling stable high speed cornering. Diff effect also protects gears from damage. Gear width has been reduced from 20mm to 15mm, reducing friction loss.

Genuine Tamiya Optional Parts. Please note: The measurements by Tamiya balls are specific for Tamiya and mathematically rounded. The balls won’t fit different brands which inquire exact 5mm balls as they are specifically designed to fit the listed Tamiya cars.

Front rims with 12mm hex hub. 62mm overall diameter. 29mm width.