Genuine Tamiya parts!

Genuine Tamiya parts!

Suitable for 1:10 touring 69mm outer diameter 47mm inner diameter 26mm width Set of two pieces incl. inserts.

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Suitable for TRF420 or cars equipped with the SSBB Upgrade Kit 54878.

These are adjustable upper arms that can be used on any variant of the TT-02 chassis. The parts allow you to add or decrease wheel camber. Adding camber for racing purposes allows the car to alter its traction characteristics under turning and cornering. • Glass fiber-reinforced Upper Arms x2 • Stainless steel Turnbuckle Shafts x2 • Low-Friction Suspension Balls x2 • Arms...

Oil-filled sealed gear diffs have become a standard tuning part for many of Tamiya’s performance race cars. This TT-02 version can be used on any of Tamiya’s TT-02 chassis variants to further improve the cars tuning options. Oil-filled gear diffs offer the user to add different viscosity silicone oils into the differential gears housing in order to change the rate of speed...

Give your TRF Super Short Big Bore Dampers an overhaul with this set, which includes completely redesigned set V Parts (those in Item 54871), plus dedicated new cylinder cap and 5.8mm damper ball connector nuts. Not only will they give more setup options, the new designs and material also boost durability and damper performance. Item Contents/Information • Reinforced V Parts...

Lightweight alu direct cups give a more linear steering feel. Also included is a durable reinforced swing shaft cap.

These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...

These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...

These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...

These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...

These parts are a new concept in Tamiya suspension mounts, using different bushings to allow adjustment of the following parameters: toe angle, tread, roll center and skid (caster) angle! There are three different types of mount, each with different dimensions. The bushings sprue contains 7 pairs of different bushing types, each type with a different hole for the suspension...

The set includes 2-piece front uprights, 4 degree hub carriers, updated arms and more - for precise, rigid suspension.

Tune your M-08 Concept chassis with this 3mm-thick carbon fiber damper stay! Lightweight and with greater rigidity than kit standard resin parts, it boosts handling. Features different attachment holes (2 additional compared to kit parts) on each side for more setup options.

Tune your M-08 Concept chassis with this 3mm-thick carbon fiber damper stay! Lightweight and with greater rigidity than kit standard resin parts, it boosts handling. Features different attachment holes (2 additional compared to kit parts) on each side for more setup options.

Sharpen up the M-08 Concept’s steering even further with these aluminum steering arms! More precise motion leads to a direct steering feel. Aluminum parts offer extremely secure attachment. Item Information/Contents • Aluminum Steering Arm (Right) x1 • Aluminum Steering Arm (Left) x1 • Steering arm components are given the iconic Tamiya blue anodized finish. • Recommended...

This aluminum steering bridge for the new M-08 Concept chassis will give more precise steering motion and more secure attachment of components. Item Information/Contents • Aluminum Steering Bridge x1 • Component has the iconic Tamiya blue anodized finish. • 5.5x2mm and 5.5x1.5mm Spacers (x2 each) are included to adjust clearance. • Recommended for use with separately sold...

★Set distance between servo horn center and ball connector at 1m increments between 15 and 22mm. ★Steering range is also adjustable. ★Incorporates servo saver function, providing protection in case of crashes and other shocks.

Suitable for Tamiya Buggies. Size: 60/14

Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the front motor layout version. Item Contents/Information • 90mm Aluminum Propeller Shaft (rear) x1 • 42mm Aluminum Propeller Shaft (front) x1 • Cross joints, input shafts and other small parts are included. • These parts replace kit standard...

Smooth power for your shaft-driven TB-05 PRO chassis car awaits with this set of parts to make a universal propeller shaft for the rear motor layout version. Item Contents/Information • 122mm Aluminum Propeller Shaft x1 • Cross joint, input shaft and other small parts are included. • These parts replace kit standard propeller shaft and pilot shaft. • Newly-designed universal...

A lighter, reliable drivetrain awaits with the release of this aluminum spur gear holder for the TB-05 PRO chassis! Item Contents/Information • TB-05 Aluminum Spur Gear Holder x1 • This lightweight (2.6g) aluminum component can be used in place of the kit-standard steel part (7.1g) for a weight savings of approximately 4.5 grams. • A hard anodized coating is applied for...

This brand new TB-05 PRO chassis component is an integrated alternative to the separated kit standard motor plate and motor spacer parts, offering secure motor attachment and enhanced overall chassis rigidity. Item Contents/Information • TB-05 One-Piece Motor Plate x1 • Aluminum component has the iconic Tamiya blue anodized finish. • Use in place of kit standard motor plate...

Give your TB-05 PRO chassis a firm rear with this aluminum damper stay mount, that promises to provide more secure damper stay attachment. Item Contents/Information • TB-05 Aluminum Rear Damper Stay Mount x1 • Provides more secure damper stay attachment and ensures your fine setup adjustments are realized in the rear damper performance. • Lightweight, durable aluminum...

Tune up your high performance RWD M-08 Concept chassis kit with this set of lightweight, durable aluminum center, counter and idler shafts. A lighter chassis awaits. Item Contents/Information • Aluminum Center Shaft, Counter Shaft, Idler Shaft x1 each • When used in place of kit standard steel parts, a total weight savings of 5.8g is achieved. • Compatible with M-08 Concept...

Genuine Tamiya spares and optionals!

Cut down on body wobble with unshakeable body mounts thanks to this lightweight yet rigid and durable 2.5mm thickness carbon fiber component. Item Contents/Information • Carbon Body Mount Base x1 • This part provides a base for the dual rear body mounts, giving secure attachment and minimizing body wobble. • Damper mount spacer is also included.

Make your M-08 Concept chassis car compatible with high-performance TRF dampers using the rigid and lightweight 3mm thickness carbon fiber damper stays in this set. Set Contents/Information • Carbon Damper Stay (Front) x1 • Carbon Damper Stay (Rear) x1 • Damper stays have more holes (Front: 4 each side, Rear: 6 each side) than kit standard parts, for greater freedom of...

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Fine-tuning your Ackerman steering angles can make all the difference to your chassis handling, and that is exactly what you can do with this new adjustable set for the TB-05 PRO chassis. The mainly aluminum components allow three different Ackerman settings to experiment with. Set Contents/Information • The aluminum steering arms and bridge in this set can be used to...

Genuine Tamiya spares!

Crafted in durable steel, these front direct cups will stand up better to impacts and also provide more weight toward the front of your car.

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine Tamiya spares and optionals - the best solution for your TRF!

This lightweight, rigid stay is 3.5mm thick, with 4 damper holes. It is compatible front and rear. Will not fit for TT-02S and TT-02SR.

Two different pivot mounts allow Ackerman angle adjustment, thereby altering the way your car handles, too.

Suitable for 1:10 touring 64mm outer diameter 47mm inner diameter 24mm width Set of two pieces.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to improved suspension feel. Compared to the standard plastic parts, these parts have less flex which contribute to more direct feel from the suspension. • Aluminum Rocker Arms x2 • Lightweight and rigid aluminum arms can be used in place of kit-standard plastic components, boosting damper...

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to superior cornering stability. • Soft (1.1mm), Medium (1.2mm) & Hard (1.3mm) Stabilizer Rods x1 each • Aluminum hex head ball connectors allow easier adjustment. • The stabilizer can be employed on the front or the rear, helping the car balance going through corners. It fits snugly between the...

Used in place of kit-standard plastic part, this alu components makes for smoothers, more precise handling.

This Hop-Up Option part is for use with the TC-01 chassis. The part replaces the stock plastic part with aluminum parts thereby contributing to a high-spec suspension setup. • Aluminum Damper Extenders x4 • These are precision, lightweight aluminum versions of the kit-standard plastic part. They further enhance damper performance. • Tamiya blue anodized finish. • Compatible...

This Hop-Up Option is for use with the TC-01 chassis. It helps to contribute to more efficient drive-line efficiency compared to using the kit standard dog-bone set up. • Crafted in durable and rigid steel, this component can be used in place of kit-standard dog bone and cup parts, which provide true rotation at a range of angles for free, efficient power. • Compatible with...

These rocker arm posts replace the stock Tamiya TC-01 chassis posts, which will reduce overall weight to your machine. • Aluminum Rocker Arm Posts x4 • These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams. • Components have a hard-anodized finish for durability. • Compatible with TC-01 chassis cars.

Those rims will work only with Tamiya 51589 tires. They will fit ONLY to TT-01 and TT-02.

Genuine Tamiya optionals!

This one-piece alu axle and hub lighten the load on the spring bottom. Replace spacers to change axle thread.

Replace the standard plastic frame posts on your M-08 M-Chassis with these aluminum posts! The rigidity and stiffness of your M-08 will improve with the use of these posts. Furthermore, the use of these posts will change the responsiveness of the car. A more rigid set-up is desired when track conditions offer high traction, whereas a less rigid set-up is desired for low...

This mount is crafted in durable steel. Its plastic bushings allow fine-tuning of toe and skid angle. Compatible with 54638 rebound stoppers.