Genuine Tamiya spare parts!

Genuine Tamiya spare parts!

Two types of stabilizers (super soft green, soft red) are included for front and rear, and bearings facilitate smooth movement.

This one-piece aluminium servo mount can be used instead of the kit-standard T8 part. More rigid servo attachment gives improved handling.

These rigid 3mm thickness carbon damper stays give more setup options compared to the standard plastic damper stays.

These are 7mm suspension balls for use on the Tamiya TC-01 and TA-08 chassis. The balls are lighter than the standard steel balls, which help reduce un-sprung weight in the suspension system. • TA08 Low Friction King Pin Balls x4 • Use in place of 7mm suspension balls and king-pins. • Aluminum components (changed from kit-standard steel) feature a hard anodized finish to...

This Hop-Up Optiuon is for use with the Tamiya TA-08 4WD chassis. It replaces the front gear diff with a one-way, which facilitates the front wheels to roll freely under deceleration and braking. Under acceleration, the unit behaves like a direct coupler/spool. Compared to using a Direct Coupler/Spool or gear differential, the one-way unit allows your car to carry more speed...

This Hop-Up Option is for use with the TA08 PRO chassis, and its limited slip effect is especially useful when installed in the rear gearbox, for a highly stable drive. PRO-TIP: This option part is best suited where track grip conditions are especially low. It’s still best to use the oil-filled gear diff unit under high-grip track conditions.

The TA08R Aluminum Motor Mount features aluminum upper deck mounts which allow for the attachment of an upper deck by 3x6mm countersunk hex head screws. With this option part you can easily take an existing TA-08PRO chassis and update its performance for more tuning options. • TA08R aluminum motor plate (3.0mm thick) x1 • Aluminum upper deck mounts x2 • 3x6mm countersunk hex...

The TA08R Carbon Upper Deck provides improved traction when accelerating. A 630-ball bearing located at the rear also ensures roll stability by keeping the deck flex characteristics consistent from left to right. • TA08R carbon upper deck (2.0mm thick carbon fiber) x1 • 630 (6x3mm) ball bearing x1 • 3x0.1mm shims x2 • 3x6mm hex head screws x6 • Compatible with the TA08 PRO...

These aluminum front upper arm mounts for the TA08PRO enhance bulkhead rigidity. • Aluminum front upper arm mount (left) x1. • Aluminum front upper arm mount (right) x1. • Features attachment points to attach separately sold Item 22082 TA08R Carbon Upper Deck (2.0mm Thick). • Allows easier attachment / detachment of upper arm ball connectors. • Compatible with the TA08 PRO...

These aluminum front upper arm mounts for the TA08PRO enhance bulkhead rigidity. • Aluminum front upper arm mount (left) x1. • Aluminum front upper arm mount (right) x1. • Features attachment points to attach separately sold Item 22082 TA08R Carbon Upper Deck (2.0mm Thick). • Allows easier attachment / detachment of upper arm ball connectors. • Compatible with the TA08 PRO...

These rear body mounts for use on the TA08 use 2.5mm carbon fiber bases and aluminum body mount posts. They limit body wobble and ensure stable rear traction. • Body mount bases (carbon fiber) x2 • Body mount posts (aluminum) x2 • 3x6mm hex head screws x2 • 3mm washers x2 • 7mm snap pins x2 • Body mount extensions (from Item 54604) allow adjustment of mount height according...

Tune up your chassis with these lightweight and durable titanium turnbuckle shafts which limit parts wear and help retain their shape. • 4x18mm titanium turnbuckle shafts x2 • Compatible with the TA08 PRO (Item 58693), TA08R (Item 47498) and TB Evo.8 (Item 42383) chassis. • NOTE: Requires 4 shafts for one kit

Genuine TRF420 part.

Genuine Tamiya spare part.

Genuine Tamiya spare parts!

4mm Alu Serrated Wheel Nut - BLUE (4 pcs)

44mm Double Cardan Joint (2pcs)

42mm Double Cardan Shaft (2pcs) Only for usage with 42216

4mm TRF Serrated Wheel Nut

Inner Diameter: ca. 14mm Length: ca. 20mm

Will reduce weight an increase performance! But please take care! They are light, they are still strong - but they are not indestructable!

Will reduce weight an increase performance! But please take care! They are light, they are still strong - but they are not indestructable!

Will reduce weight an increase performance! But please take care! They are light, they are still strong - but they are not indestructable!

These caps are for use in unison with Items 54871 and 42344, to give your TRF Super Short Big Bore Dampers a performance boost, and enhance the range of setups at your disposal.

Genuine TRF420 part.

TRF420 - Super Short Big Bore TRF Alu Damper Set - BLUE (4pcs)

This swing shaft reduces weight about 60%. Please use it only in the rear - cause it may be deformed by heavy collision.

Useable with universal shafts.

Genuine Tamiya optionals! Replacement for 42137

42mm Double Cardan Shaft (2pcs) Only for usage with 42216

43mm Double Cardan Shaft (2pcs) Only for usage with 42216

Genuine Tamiya spares and optionals - the best solution for your TRF!

Genuine TRF420 part.

Genuine Tamiya optionals!

Genuine Tamiya optionals!

Genuine Tamiya optionals!

Genuine Tamiya optionals!

Genuine Tamiya optionals!

TRF 419 / TB Evo 6 - Gear Diff O-Rings - BLUE(4 pcs)

Genuine Tamiya spares - maybe the best solution for your car!

Genuine Tamiya Spares and Optionals!

Genuine Tamiya Spare Parts.

Hi-Torque Servo Saver (Black)

Genuine Tamiya Spares.

Genuine Tamiya spares

Genuine Tamiya spares.

Gear Diff Alu Diff Joint (2pcs)

Internal Gears for Geardiff

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya screws!

Genuine Tamiya spares and optionals - the best solution for your TRF!