Made for 1/8 GT cars - like Serpent Viper 989 or XRAY RX8. NOT for 1:8 Onroad cars like Serpent SRX8 GT or XRAY GTX.

Made for 1/10 Onroad cars! Can be used to measure and adjust: - camber angle - front and rear toe angle - front and rear caster angle - steering endpoint symmetry - effects of Ackermann changes

Including screws and nuts.

Suitable for 6mm body posts.

3mm and 4mm are the most popular sizes in 1:10 scale.

Body Shell Scissors

Hinweis: Diesen Schraubensicherungslack sollte nur verwenden wer damit umzugehen weiß. Heavy Duty bedeutet in der Praxis "ganz schön fest". Kann man machen - hat in einem Elektro Tourenwagen aber nur sehr wenig verloren (beim Nitro sieht die Welt schon wieder anders aus!). Tipp: Schraubensicherungslack soll die Schrauben nur vor dem Losdrehen schützen. Es ist dazu nicht...

Thread Lock - Standard (10g)

Traction Compund Bottle with brush 42ml capacity No adhesive included. The pen can be filled with your choice of tyre traction compound with the wide applicator brush ensuring evenly soaking of the tyre surface. The semi-transparent design ensures easy recognition of the remaining fill level.

Size: 430 x 300 mm Thickness: 19mm Suitable for: 1/10 onroad + 1/12 Suitable measuring sticker: TI-30112 Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C. approved.

Size: 540 x 340 mm Thickness: 19mm Suitable for: 1/8 Onroad + GT (not suitable for Truggy) Suitable measuring sticker: TI-30112 Please note - the sticker is also used for the 1/10 board, so it is smaller than the 1/8 board. Please note: It’s impossible to get a 100% flat board made of this kind of wood. Team Titan will inspect all boards before shipment – so they are Q.C....

Suitable measuring sticker for Team Titan Setup Boards. Please note - the sticker is used for the 1/10 board as well as the 1/8 board, so it is smaller than the 1/8 board.

Designed for quick and easy camber angle checks the 1-piece gauge allows to measure angles of 0.5, 1.0, 1.5 and 2.0 degree by simply placing the gauge alongside the wheel.

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

The Team Titan pinions are lightweight and hard coated. They have the same quality as standard pinions, but are much lighter. The pinions fit a 3.175mm shaft. Please note: The name of the brand is Team Titan - the pinions are not made from Titan.

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Material: Aluminium Pitch: 64dp Shaft: 3.175mm Overall width: 9mm Width of teeth: 4.5mm

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!

Suitable for cars like ARC, XRAY or Serpent!