No results were found for the filter!
RCK 210002 - Allen Wrench Hex Tip - 1.5mm - 100mm Länge - Ball Head
Total length: 100mm Shaft diameter: 3.0mm Please be very careful! 1.5mm ball head is very fragil. If you are doing it wrong you will destroy screw and tool. No power tool! Just very low torque!
€7.99
*
currently 7x in stock
T-Work's 195-MBX8 - Spring Steel Diff Joints for MUGEN MBX8 (2 pcs)
Strong and light!
€21.99
*
currently 30x in stock
T-Work's ASS-306LPBK - Ultra Flat Hex Head Screw - M3x6mm - half threaded (8pcs)
Half threaded - with a very flat head.
€9.99
*
currently 6x in stock
T-Work's C-B6 - Steel Drive Shafts - Rear - for Asso B6 (2 pcs)
Including M4 Wheel Nuts.
€27.99
*
currently 1x in stock
T-Work's C-B7 - Steel Drive Shafts - Rear - for Asso B7 (2 pcs)
The Drive Shaft eliminates friction increased acceleration and more efficiency traction.
€24.99
*
currently 6x in stock
T-Work's C-M06 - Steel CVD Shafts - 30mm - for M03 / M04 / M05 / M06 /MF-01X (2 pcs)
Optional driveshafts for Tamiya M-Chassis (M03, M04, M05, M06, MF-01X).
€21.99
*
currently 5x in stock
T-Work's C-MBX8T-CF - Front Center Drive Shaft - 82.5mm - for Mugen MBX8T / MBX7T
Suitable for MBX8T / MBX7TR / MBX7T
€24.99
*
currently 3x in stock
T-Work's C-MBX8T-CR - Rear Center Drive Shaft - 156.5mm - for Mugen MBX8T / MBX7T
Suitable for MBX8T / MBX7TR / MBX7T
€26.99
*
currently 3x in stock
T-Work's C-MP10-CF - Steel CVD Center Shaft - Front - 82mm - für Kyosho MP10
Suitable for Kyosho MP10E.
€24.99
*
currently 3x in stock
T-Work's C-MP10E-CF - Steel CVD Center Shaft - Front - 86mm - für Kyosho MP10E
Suitable for Kyosho MP10E.
€24.99
*
currently 1x in stock
T-Work's C-MP10E-CR - Steel CVD Center Shaft - Rear - 113mm - für Kyosho MP10E
Suitable for Kyosho MP10E.
€24.99
*
currently 1x in stock
T-Work's C-MSB1 - Spring Steel Drive Shafts - for Mugen MSB1 (2 pcs)
Very durable - but still very light!
€24.99
*
currently 1x in stock
T-Work's C-MTC2-AA - Alu Drive Shafts - 44.5mm - for Mugen MTC-2 (2 pcs)
Alu shaft + alu axle => super light!
€24.99
*
currently 8x in stock
T-Work's C-RC8T-CR - Steel Rear Center CVD 165mm - for Team Associated RC8 T3.2 / T3.1
Will fit to T3.1 / T3.2
€30.99
*
currently 1x in stock
T-Work's C-TC01 - Steel CVD Shafts - 42mm - for TC-01 / XV-01 (2 pcs)
Optional driveshafts for Tamiya TC-01 and XV-01
€21.99
*
currently 7x in stock
T-Work's C-TC01-C - Steel CVD Center Shaft - 54mm - for TC-01 (1 pc)
T-Work's optional parts for your TC-01!
€13.99
*
currently 1x in stock
T-Work's C-TT01 - Steel CVD Shafts - 39mm - for TT-01 (2 pcs)
Optional driveshafts for Tamiya TT-01.
€21.99
*
currently 6x in stock
T-Work's C-X423-A - Alu Drive Shafts - 47.8mm - for XRAY X4 2023 (2 pcs)
Needs to be used with the standard outdrives (no BB version) of X4 2022!
€21.99
*
currently 2x in stock
T-Work's C-X423-AA - Alu Drive Shafts - 47.8mm - for XRAY X4 2023 (2 pcs)
Needs to be used with the standard outdrives (no BB version) of X4 2022!
€24.99
*
currently 9x in stock
T-Work's CC-X423 - Spare Driveshaft Clips - for XRAY X4 2023 (8 pcs)
Spare part for T-Work's X4 23 Driveshafts.
€4.99
*
currently 7x in stock
T-Work's CV-MTC2H - ECS Drive Shafts - for Mugen MTC-2 (2 pcs)
This part is just a replacement for the standard part. Cheaper - nothing else.
€24.99
*
currently 2x in stock
T-Work's CV-TC01 - ECS Drive Shafts - 37mm - for TC-01 (2 pcs)
Optional driveshafts for Tamiya TC-01
€27.99
*
currently 8x in stock
T-Work's CV-X4 - Steel Spring ESC Drive Shafts - 45mm - for XRAY X4 (2 pcs)
You are looking for a cheaper option than the solution which is integrated in your kit? Got it!
€29.99
*
currently 2x in stock
T-Work's CV-X423-A - Alu Drive Shafts - 45mm - for XRAY X4 2023 (2 pcs)
Needs to be used with the standard outdrives (no BB version) of X4 2022!
€29.99
*
currently 8x in stock
T-Work's CVB-X423-V2 - ECS Bearing Drive Shafts - 45mm - for XRAY X4 2023 / X4F 2024 - V2 (2 pcs)
This product is compatible with the original number #305316
€42.99
*
currently 5x in stock
T-Work's EA-028-5SM - 5mm Ultra Short Battery Plugs (4 pcs)
Total lenght: 10mm
€5.99
*
currently 30x in stock
T-Work's EA-029-4 - 4mm Dual Battery Plugs (4 pcs)
For those who want to combine 2 7.4V batteries to a 14.8V pack. Please not: Will not work with every battery. You will need 4mm batteries with open tubes. Total lenght: 28mm
€13.99
*
currently 14x in stock
T-Work's EA-029-5 - 5mm Dual Battery Plugs (4 pcs)
For those who want to combine 2 7.4V batteries to a 14.8V pack. Please not: Will not work with every battery. You will need 5mm batteries with open tubes. Total lenght: 25mm
€13.99
*
currently 13x in stock
T-Work's EA-031 - Connector Style Switch with Graphite Plate - for Kyosho MP10
Suitable for Kyosho MP10T.
€16.99
*
currently 5x in stock
T-Work's EA-032 - 4/5mm Battery Connector (2 pcs)
Perfect for those wo are using 4mm and 5mm batteries. Total lenght: 18.5mm
€5.99
*
currently 51x in stock
T-Work's EA-035 - 5-9V Electronic Switch
The device is to replace the traditional power switch. It can be easily installed in the original switch position and improve the sliding switch durability problems as it's more durable in vibrating, dusty and oily environment. The device is also made with contactless components, thus reducing the resistance and improve system reliability as well.
€38.99
*
currently 1x in stock
T-Work's EA-040-4-BB - 4mm Polarity Heatsink Connector - black + black (2 pcs)
Content: 1 Pair - as shown in the first picture.
€6.99
*
currently 40x in stock
T-Work's EA-040-4-RB - 4mm Polarity Heatsink Connector - red + black (2 pcs)
Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.
€6.99
*
currently 54x in stock
T-Work's EA-040-5-BB - 5mm Polarity Heatsink Connector - black + black (2 pcs)
Content: 1 Pair - as shown in the first picture.
€6.99
*
currently 64x in stock
T-Work's EA-040-5-RB - 5mm Polarity Heatsink Connector - red + black (2 pcs)
Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.
€6.99
*
currently 88x in stock
T-Work's P-2914 - Replacement Driveshaft Pin for TO-282-MP10 - 2.9x13.8mm (6 pcs)
Suitable for MP10 Driveshafts from T-Work's
€5.99
*
currently 5x in stock
T-Work's TA-004O - Alu M3 Socket Buttom Head Washers - ORANGE (10 pcs)
Set of 10pcs - 10mm outer diameter.
€7.99
*
currently 5x in stock
T-Work's TA-027BK - Alu Wheel Shim for 1:10 Touring - 0.5mm - BLACK (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 7x in stock
T-Work's TA-027O - Alu Wheel Shim for 1:10 Touring - 0.5mm - ORANGE (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 7x in stock
T-Work's TA-027P - Alu Wheel Shim for 1:10 Touring - 0.5mm - PURPLE (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 8x in stock
T-Work's TA-027R - Alu Wheel Shim for 1:10 Touring - 0.5mm - RED (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 18x in stock
T-Work's TA-027TB - Alu Wheel Shim for 1:10 Touring - 0.5mm - BRIGHT BLUE (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 12x in stock
T-Work's TA-028BK - Alu Wheel Shim for 1:10 Touring - 0.75mm - BLACK (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 12x in stock
T-Work's TA-028O - Alu Wheel Shim for 1:10 Touring - 0.75mm - ORANGE (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 15x in stock
T-Work's TA-029BK - Alu Wheel Shim for 1:10 Touring - 1.0mm - BLACK (4 pcs)
For an easy adjustment of your track width.
€6.99
*
currently 4x in stock
T-Work's TA-029O - Alu Wheel Shim for 1:10 Touring - 1.0mm - ORANGE (4 pcs)
For an easy adjustment of your track width. Please note: The orange coloured shims are having a problem with colour matching. Sometimes shims are more red than orange.
€6.99
*
currently 15x in stock
T-Work's TA-033BK - Alu Grease Holder - ca. 13ml - BLACK
Anodized Alum Grease Holders (Large) Internal Measurements - 23.5mmD x 18mmH, External Measurements - 29.5mmD x 23mmH
€8.99
*
currently 2x in stock
T-Work's TA-033O - Alu Grease Holder - ca. 13ml - ORANGE
Anodized Alum Grease Holders (Large) Internal Measurements - 23.5mmD x 18mmH, External Measurements - 29.5mmD x 23mmH
€8.99
*
currently 4x in stock
T-Work's TA-033P - Alu Grease Holder - ca. 13ml - PURPLE
Anodized Alum Grease Holders (Large) Internal Measurements - 23.5mmD x 18mmH, External Measurements - 29.5mmD x 23mmH
€8.99
*
currently 2x in stock
T-Work's TA-034BK - Alu Grease Holder - ca. 10ml - BLACK
Anodized Alum Grease Holders Internal Measurements - 23.5mmD x 13mmH, External Measurements - 29.5mmD x 18mmH
€8.99
*
currently 4x in stock