15ml each bottle - take care, they are EMPTY!

10mm width 120cm in total (8x10cm + 8x5cm pieces) 2.0mm thickness sticky

25mm width 220mm in total (2 pcs 110x25mm) 0.5mm thickness sticky

Secure your rear wing in a save position!

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

It's new body protector sets for 1/8th, 1/10th and 1/12th scale vehicles. The 1/10th and 1/12th scale sets include both wheel well and body post protectors that can be used either to reinforce a new or repair an already damaged body shell. The 1/10th set is usable for most touring car body shells and includes a pair of sheets with two wheel well and four body post stickers...

Necessary? No. But nice! Please note: You will not purchase a transmitter. Only the two nuts incl. two set screws. The colour will be as offered, even if we show only the blue one mounted.

Necessary? No. But nice! Please note: You will not purchase a transmitter. Only the two nuts incl. two set screws. The colour will be as offered, even if we show only the blue one mounted.

Necessary? No. But nice! Please note: You will not purchase a transmitter. Only the two nuts incl. two set screws. The colour will be as offered, even if we show only the blue one mounted.

Offering 25ml of volume the pen can be filled with your choice of tyre traction compound with the wide applicator brush ensuring evenly soaking of the tyre surface. The semi-transparent design ensures easy recognition of the remaining fill level.

Get your car in balance again!

Get your car in balance again!

Very strong and adjustable. Optional inserts available!

Very strong and adjustable. Optional inserts available!

Suitable for TA-141-23 and TA-141-25 servo horn.

Suitable for TA-141-23 and TA-141-25 servo horn.

Sometimes it's helpful to have even the shims as heavy as possible.

Nice to use and nice to have at the same time!

Suitable for standard 7.0mm socket wrenches.

Suitable for standard 7.0mm socket wrenches.

Suitable for standard 7.0mm socket wrenches.

Suitable for standard 7.0mm socket wrenches.

Suitable for standard 7.0mm socket wrenches.

Tire Additive Bottles are a great choice for rubber tire traction compound applications. Suitable for tire additives that are mix or apply. The dauber tip allows even and consistent application. The dauber tip has been tested for a long time, and has strong abrasion resistance,not prone to lint. It will not cause dauber tip to swell, corrosion or rotten due to the corrosion...

3.25mm diameter

Each of them holds either: a) 4x touring car tires b) 2x front + 2x rear 2WD buggy tires

Will give an advantage for bumpy tracks and will additionally protect your lower deck.

Will fix your exhaust in 1:10 or 1:8 nitro car. No need to use a fuel tube which is not really as strong as expected. Set of two pieces, will fit to ONE exhaust.

Open your tank very easy and fast - for a fast re-fuel during pitstops. Take care: Only the first picture shows what's included. The second picture shows how to use it. There is no tank included.

Outer diameter: 16mm Suitable for M3 countersunk screws.

This graphite brace will keep your rear wing strong and safe. In the case of a crash it will distribute incoming forces and prevent your rear wing from being destroyed. Can be used for rear wing stays from 38 to 50mm hole distance.

T-Work's has come up with a 1/8 Buggy Wing which features a wickerbill design that allows greater air flow and increases the downforce when needed. In addition, the wing has pre-drilled holes which saves you the hassle to have to drill them yourself. Package includes wing, two wickerbills. TAKE CARE: You will get a yellow one as offered - even if we show also a white one.

Closed version - keep dirt and dust outside.

Take care: it's a set screw - even if it might look like a regular screw!

Take care: it's a set screw - even if it might look like a regular screw!

Take care: it's a set screw - even if it might look like a regular screw!

Replaces the stock steelscrews.

Replaces the stock steelscrews.

Suitable for standard 7.0mm socket wrenches.

Half threaded - with a very flat head.

TAKE CARE! Will only work with 110° countersunk parts - like XRAY 301020 - a very thin 1.5mm lower deck.

Half threaded - with a very flat head.

Half threated - perfect for mounting graphite parts.

Half threaded - with a very flat head.

TAKE CARE! Will only work with 110° countersunk parts - like XRAY 301020 - a very thin 1.5mm lower deck.

Half threated - perfect for mounting graphite parts.

Half threaded - with a very flat head.

Half threaded - with a very flat head.

TAKE CARE! Will only work with 110° countersunk parts - like XRAY 301020 - a very thin 1.5mm lower deck.

WHAT A BEAUTY! 17x10x3cm size - perfect size for 1:10 / 1:12 Onroad cars.

T-Work's TT-075-A - Hardcase Transport Box - for Tools Outer dimensions: ca. 220x120x65mm TAKE CARE: Will be delivered without content. Those pictures are just shown to understand how it works.

33x23x10cm size Will be delivery empty - without content!

Handy and nice :-) 13x9.5x3.5cm - compact size! (Take care - this is the adjusted size of the new version!)

Handy and nice :-) Will be possible to insert up to 9 standard glow plugs (for 1/10 or 1/8 nitro car). Take care: There is NO plug included!

16x13x5cm - size! Including a foam insert which fits perfect for REDS bearing replacement tool Take care: The tool is NOT included. It's just shown in one picture to make clear how to use the bag.

27x21x9cm - size! Including a foam insert which fits perfect for ISDT K2 / Kavan C100 charger. Take care: The charger is NOT included. It's just shown in one picture to make clear how to use the bag.

22x17x10cm - size! Including a foam insert which fits perfect for RIDE 29101 or Tamiya 54152 Take care: The pump is NOT included. It's just shown in one picture to make clear how to use the bag.

22x17x10cm - size! Including a foam insert which fits perfect for RIDE 29101 or Tamiya 54152 Take care: The pump is NOT included. It's just shown in one picture to make clear how to use the bag.