Genuine XPRESS spares and optionales for your car! Designed to be used with the Flex Elimuinator Bearing and Collar set #XP-10683, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction!

Original spare and optional parts!

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminum version!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car! Replaces the standard kit belt of the XQ3S (11180) which is not able to be sold seperatly.

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Original spare and optional parts! The pictures show the set in build in condition to show the usage.

Original spare and optional parts! Suitable for the V2 set 10641 with 3.0mm pin diameter.

V2 are already the STRONG ones - with some additional material to make them even more strong.

Genuine XPRESS spares and optionales for your car! 4mm wide belts for modified racing or where durability is more important than drivetrain smoothness! Will fit most other mid mount cars which run 351mm belts as well.

Progressive diameter shock bodies for the Execute XQ10 or Long Travel V2 dampers! Featuring a more narrow opening at the top resulting in more resistance at the end of the travel. This will translate in a more aggressive car at turn in whilst more stability mid corner!

Original spare and optional parts! Replacement plastic shock parts for the V2 long travel short shock set (#XP-10593), if used with original kit shock shock length will be increased 1mm.

Replacement long travel shock bodies for the Execute XQ10 or the V2 short shock set.

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!

Fan mount for 30mm fans to mount neatly underneath the servo mount plate on the FM1S, leaves you with more space to mount your electronics on the small m-chassis!

FWD Conversion kit for the Xpress Execute XQ10, FWD drivetrain combined with a center of gravity shifted towards the center. By moving the pulley, the motor has been moved forwards as well putting more weight forwards and changing the weight balance by shifting one of the most heavy objects on the car. Combined with a purpose shaped chassis deck which is the result of long...

Genuine XPRESS spares and optionales for your car! Designed to be used with the Flex Eliminator Upper Deck set #XP-10639, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction! Use the aluminum collar if you wish to limit flex in all directions. Will fit also to the...

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a larger distance (Bigger Number), the outside wheel will turn more and create a more...

Genuine XPRESS spares and optionales for your car!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Gain more mechanical grip with this high flex chassis for use on low to medium tracks. Cut out slits around the motor mount area allowing more flex in the central area, combined with a different weave pattern greatly increases the flex of the graphite!

Genuine XPRESS spares and optionales for your car!

V2 are already the STRONG ones - with some additional material to make them even more strong.

Spare part for the FWD conversion kit 10829. Will also fit for XQ10F - but this would be a downgrade.

Spare part for the FWD conversion kit 10829. Will also fit for XQ10F - much softer than the kit one.

Genuine XPRESS spares and optionales for your car! Shock towers for the Execute XQ10 which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!

Genuine XPRESS spares and optionales for your car! Shock towers for the Execute XQ10 which features a deep cut on the top of the shock tower, allowing for more flex in the bulkhead areas. Which translates into more corner speed, you can also tune your car by using a normal shock tower in the opposing end of the car!

Can be used as replacement for 10001 (which is not available anymore). Take care: You will need the low profile foam bumper 10562 as additional part - if you want to use the bumper. It can be used also as replacement for 10563 which does not include the vertical body adaptors.

TAKE CARE! Those blades doesn't have the regular size. Regular size is 3.5mm - those ones are having 4.0mm. You can use them only with some special outdrives (like XP-10921).

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle.

Special HD version for 4.0mm blades (instead of 3.5mm). You will need XP-10876 as spare part when they are worn out! Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. Does not fit for...

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Aluminum universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain.

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle.

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart!

Genuine XPRESS spare spart! Replacement for 10745 - will also fit for XQ10(F).

Brass shorty battery mount adaptor for use on carpet tracks to improve your car's handling characteristics! Features our popular spring loaded battery mounting system for a easy and secure battery mounting solution!

Original spare and optional parts! Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under pressure and therefore will not tweak the chassis! Replaces 10717, includes different...

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Barrel shaped springs for 1/10 touring car, giving a progressive spring action without changing the spacing of the spring. Resulting in a more predictable handling car improving lap consistency. Your choice of 19 or 20mm widest width, with 19mm being stiffer than 20mm of the same coil number

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!