Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the old set of suspension arms, you will need to purchase the 3.0mm outer suspension pins as well. (#XP-10602)

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

Spare part for the 10166 shafts.

Spare part for the 10166 shafts.

Spare part for the 10166 and 11069 shafts.

Spare part for the 10166 and 10334 and 11069 shafts. The set contains parts for ONE shaft.

High clearance Top Deck for use with our Mid Motor Conversion Kit #XP-10495, more space for big pinions through the extended cut out point! Will be handy with 21.5t blinky classes such as VTA or GT!

Spare part for the converson kit 10625.

Spare part for the converson kit 10625.

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

Original spare and optional parts! Aluminum one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Replacement for 10194.

Original spare and optional parts! Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts! The pictures show the set in build in condition to show the usage.

Original spare and optional parts! Suitable for the V2 set 10641 with 3.0mm pin diameter.

V2 are already the STRONG ones - with some additional material to make them even more strong.

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!

Genuine XPRESS spares and optionales for your car!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Genuine XPRESS spares and optionales for your car!

V2 are already the STRONG ones - with some additional material to make them even more strong.

Can be used as replacement for 10001 (which is not available anymore). Take care: You will need the low profile foam bumper 10562 as additional part - if you want to use the bumper. It can be used also as replacement for 10563 which does not include the vertical body adaptors.

Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S.

TAKE CARE! Those blades doesn't have the regular size. Regular size is 3.5mm - those ones are having 4.0mm. You can use them only with some special outdrives (like XP-10921).

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle.

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Aluminum universal shaft for replacing the rear steel driveshaft for a lighter and more efficient drivetrain.

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle.

Genuine XPRESS spares and optionales for your car!

Lift your servo, receiver and fan off your chassis to not affect your chassis flex. Graphite piece which extends from underneath the servo for you to stick your electronics on. Use the 70mm plate on mid mount cars and 90mm on standard layout cars (XQ1, XQ2S)

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spare spart!

Brass shorty battery mount adaptor for use on carpet tracks to improve your car's handling characteristics! Features our popular spring loaded battery mounting system for a easy and secure battery mounting solution!

Original spare and optional parts! Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under pressure and therefore will not tweak the chassis! Replaces 10717, includes different...