Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts!

On high grip conditions, change to this steering plate which offers less ackermann which in turn provides more stability in the middle of the corner! Comes in a pack of four of two sets, marked with holes. The set with two holes give the least amount of ackermann, use this set to fine tune the steering of your car!

Original spare and optional parts!

Original spare and optional parts!

Upgrade your XQ1S / XQ2S. The set contains all parts you'll need to use the anti roll bars in front and rear! Replacement for the discontinued item 10282.

Original spare and optional parts!

Original spare and optional parts! Spare part for 10654 - availabe for standard size batteries and shorties.

Original spare and optional parts! Spare part for 10654 - availabe for standard size batteries and shorties.

Stiffens the body posts, which reduces the body from moving side to side which increases stability in the corners. 74mm front distance 100mm rear distance

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts! Does not fit for alu spool axle 10338 and 10133.

Genuine XPRESS spares and optionales for your car!

Replacement motor mount for the Execute XQ2S, which also fits the XQ1S which gives more options for flex adjustment and the motor is 1.5mm cloer to the centerline when compared to the old one .

Will also fit XQ1S - if you want to adjust the flex with optional parts.

Genuine XPRESS spares and optionales for your car!

Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

New and improved suspension arms. These will be direct upgrade also on the Execute XQ1 series, during testing it was found that these suspension pieces gave more corner speed! If you are upgrading from the old set of suspension arms, you will need to purchase the 3.0mm outer suspension pins as well. (#XP-10602)

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

Original spare and optional parts! Aluminum one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Replacement for 10194.

Original spare and optional parts! Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Original spare and optional parts!

Original spare and optional parts! The pictures show the set in build in condition to show the usage.

Genuine XPRESS parts for your GripXero!

Original spare and optional parts! Suitable for the V2 set 10641 with 3.0mm pin diameter.

V2 are already the STRONG ones - with some additional material to make them even more strong.

With this kit you will be able to convert your XQ1S into a XQ1S-MM. Will be also possible for XQ2S! You'll get the latest update to your car - following the latest competition trends. Take care - it's NOT a complete car. Just a conversion kit which still needs an existing XQ1S to convert. The kit contains: - FRP lower deck, upper deck and servo mount - Alu motor mount...

Spare part for the converson kit 10690.

Spare part for the converson kit 10690.

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position!

Spare part for XQ2S equipped with conversion Kit 10690

Spare part for XQ2S equipped with conversion Kit 10690

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!

Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797.

Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797.

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress Sports series cars with short shock towers installed! Springs have to be purchased individually.

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Will also fit XQ1S - if you want to adjust the flex with optional parts.

V2 are already the STRONG ones - with some additional material to make them even more strong.

With this kit you will be able to convert your XQ1S or XQ2S into a mid mount FWD car! Take care - it's NOT a complete car. Just a conversion kit which still needs an existing XQ1S / XQ2S to convert. The kit contains: - FRP lower deck, upper deck and servo mount - Alu motor mount including center shaft, pulleys, spur gear and bearings - belt for the new motor position - some...

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a larger distance (Bigger Number), the outside wheel will turn more and create a more...

Can be used as replacement for 10001 (which is not available anymore). Take care: You will need the low profile foam bumper 10562 as additional part - if you want to use the bumper. It can be used also as replacement for 10563 which does not include the vertical body adaptors.

Will also fit XQ1S - if you want to make your car more stiff! Especially for high grip conditions!

Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S.

TAKE CARE! Those blades doesn't have the regular size. Regular size is 3.5mm - those ones are having 4.0mm. You can use them only with some special outdrives (like XP-10921).