Replacement shock parts for the Sports Short Shocks XP-10797 as well as on the Execute XQ2S! Keep some spares or change out when your original parts develop slop from collisions on the track! Enough parts in one pack to rebuild four shocks!

Softer, less contact path allows these X Rings to not generate as much drag on your diff cups when compared to traditional o-rings!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

Run short shocks (#XP-10593) on your Execute XQ1 or XQ1S! With short shocks you get more stability through corners which results in more consistent laptimes!

Spare part for the 10166 shafts.

Spare part for the 10166 shafts.

Spare part for the 10166 and 11069 shafts.

Spare part for the 10166 and 10334 and 11069 shafts. The set contains parts for ONE shaft.

Spare part for the converson kit 10625.

Spare part for the converson kit 10625.

Genuine XPRESS spares and optionales for your car!

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

A new type of composite material, giving smoother action and prevents play for developing over a longer period of time! All plastics on the Execute XQ10 have been upgraded to this material! Keeping the flat shape design which allows you to run a taller camberlink position under the wheel without rubbing the wheel. 10634 - 10mm - for anti rollbar 10635 - 13mm - servo linkage...

Original spare and optional parts! Aluminum one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well! Replacement for 10194.

Original spare and optional parts! Brass one piece FR suspension mount for all of the Execute Series of cars, enlarged slot allowing this to be used with the XQ1 Mid conversion kit as well!

Original spare and optional parts!

Plastic upper deck stiffener for tune the flex of the top deck stiffer but not too stiff when using the aluminum version!

Genuine XPRESS spares and optionales for your car!

Original spare and optional parts!

Genuine XPRESS spares and optionales for your car! Replaces the standard kit belt of the XQ3S (11180) which is not able to be sold seperatly.

Original spare and optional parts! The pictures show the set in build in condition to show the usage.

Genuine XPRESS parts for your GripXero!

Original spare and optional parts! Suitable for the V2 set 10641 with 3.0mm pin diameter.

V2 are already the STRONG ones - with some additional material to make them even more strong.

With this kit you will be able to convert your XQ1S into a XQ1S-MM. Will be also possible for XQ2S! You'll get the latest update to your car - following the latest competition trends. Take care - it's NOT a complete car. Just a conversion kit which still needs an existing XQ1S to convert. The kit contains: - FRP lower deck, upper deck and servo mount - Alu motor mount...

Spare part for the converson kit 10690.

Spare part for the converson kit 10690.

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position!

Spare part for XQ2S equipped with conversion Kit 10690

Spare part for XQ2S equipped with conversion Kit 10690

Original spare and optional parts! Replacement plastic shock parts for the V2 long travel short shock set (#XP-10593), if used with original kit shock shock length will be increased 1mm.

Replacement long travel shock bodies for the Execute XQ10 or the V2 short shock set.

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!

Genuine XPRESS spares and optionales for your car! Replacement for 10261

Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797.

Replacement FRP shock tower the Execute XQ2S! Also fits on the Execute XQ1S if you want to upgrade your ride to run short shocks #XP-10797.

Short shock sets as same as the original ones that came with the Execute XQ2S, will also fit other Xpress Sports series cars with short shock towers installed! Springs have to be purchased individually.

Genuine XPRESS spares and optionales for your car!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Genuine XPRESS spares and optionales for your car!

Will also fit XQ1S - if you want to adjust the flex with optional parts.

V2 are already the STRONG ones - with some additional material to make them even more strong.

With this kit you will be able to convert your XQ1S or XQ2S into a mid mount FWD car! Take care - it's NOT a complete car. Just a conversion kit which still needs an existing XQ1S / XQ2S to convert. The kit contains: - FRP lower deck, upper deck and servo mount - Alu motor mount including center shaft, pulleys, spur gear and bearings - belt for the new motor position - some...

Spare part for the FWD conversion kit 10829. Will also fit for XQ10F - but this would be a downgrade.

Spare part for the converson kit 10829.

Spare part for the FWD conversion kit 10829. Will also fit for XQ10F - much softer than the kit one.

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a larger distance (Bigger Number), the outside wheel will turn more and create a more...

Can be used as replacement for 10001 (which is not available anymore). Take care: You will need the low profile foam bumper 10562 as additional part - if you want to use the bumper. It can be used also as replacement for 10563 which does not include the vertical body adaptors.

Will also fit XQ1S - if you want to make your car more stiff! Especially for high grip conditions!

Aluminum bottom chassis for Execute XQ2S, used for in either High Grip Asphalt or Carpet. By adding more weight to the lowest point of the chassis, this increases stability and lowers the center of gravity! It also fits with XQ1 and XQ1S.

TAKE CARE! Those blades doesn't have the regular size. Regular size is 3.5mm - those ones are having 4.0mm. You can use them only with some special outdrives (like XP-10921).

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

This is Xpress 5.5mm Ball, longer gap between the flange and the shock allowing greater movement angle.

Special HD version for 4.0mm blades (instead of 3.5mm). You will need XP-10876 as spare part when they are worn out! Titanium lightweight yet tough and durable spool outdrives for all forms of racing! Specially re-designed shape to make use of the full outdrive blade to get instantaneous power delivery! The lower weight increases the drive train efficiency. Does not fit for...

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.