Original spare and optional parts! Suitable for the V2 set 10641 with 3.0mm pin diameter.

V2 are already the STRONG ones - with some additional material to make them even more strong.

Replacement upper bulkhead set for the Execute XQ2S. Can also be installed into other sport series cars, which allows the adjustment of high or low differential position!

Further fine tune your roll centers with these easy to install spacer shims for your lower suspension mounts! Also included is a shim for the one-piece optional FR mount!

Genuine XPRESS spares and optionales for your car!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Increase the trackwidth for your Execute Series car! Gain 1.5mm in total (0.75mm each side) in trackwidth in the rear!

Genuine XPRESS spares and optionales for your car!

V2 are already the STRONG ones - with some additional material to make them even more strong.

Adjust the distance between the two ballends on the steering bridge with this insert steering bridge system! What this achieves is different ackermann settings and adjusts how much steering angle difference you can achieve between the outside and inside tires when you turn. By using a larger distance (Bigger Number), the outside wheel will turn more and create a more...

Can be used as replacement for 10001 (which is not available anymore). Take care: You will need the low profile foam bumper 10562 as additional part - if you want to use the bumper. It can be used also as replacement for 10563 which does not include the vertical body adaptors.

Designed to be used with the Flex Eliminator Bearing and Collar set #XP-10683, this set will allow you to limit longitudinal chassis flex whilst retaining lateral chassis flex. What this allows is corner grip but increasing forward traction!

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

Adjust the height of which your linkage connects to your servo horn easily with the slide-able mounting tab on this servo horn! Raise the height for a more aggressive responding car, whilst lower it for a more linear feel!

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Genuine XPRESS spares and optionales for your car! New and improved suspension arms, in our hard material. These will be direct upgrade on the Execute series, during testing it was found that these suspension pieces gave more corner speed! Version 2 introduces an inner hole for mounting your rear shocks onto for a even more upright shock angle.

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Positive caster angle rear C-Hubs for our On-Power Control System V2 #XP-10641, adding on-power stability to the rear. Also included are the new kingpin sets which are required for installing these C-Hubs

Genuine XPRESS spares and optionales for your car!

Lift your servo, receiver and fan off your chassis to not affect your chassis flex. Graphite piece which extends from underneath the servo for you to stick your electronics on. Use the 70mm plate on mid mount cars and 90mm on standard layout cars (XQ1, XQ2S)

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spare spart!

Original spare and optional parts! Spring loaded anti tweak battery holders for the Execute series of cars! Highly adjustable for different types of batteries, including different height posts to use with either normal or LCG batteries! Without having to use tape, the chassis is not under pressure and therefore will not tweak the chassis! Replaces 10717, includes different...

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS spares and optionales for your car!

Genuine XPRESS ball bearing.

Genuine XPRESS ball bearing.

Genuine XPRESS ball bearing.

Genuine XPRESS ball bearing.

Genuine XPRESS ball bearing.

Genuine XPRESS ball bearing.

Original spare and optional parts!

Suitable for the XQ, XM and FT cars.

Suitable for the XQ, XM and FT cars.

Suitable for the XQ, XM and FT cars.

Suitable for the XQ, XM and FT cars.

Suitable for the XQ, XM and FT cars.

Reduce play in your drive shaft. But take care - it's necessary to have still a bit of it. Otherwise it will stuck :-)

Genuine XPRESS spares and optionales for your car!

Suitable for the XQ, XM and FT cars.

Suitable for the XQ, XM and FT cars.

XPRESS 40198 - AT1 - Steel Shims - 8x10x0.2mm (10 pcs)

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

XPRESS 40240 - AT1 - Steel Shims - 8x10x0.1mm (10 pcs)

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!

Suitable for the XQ, XM, FM, AT and FT cars. And of course many other brands - like XRAY, Awesomatix, Serpent...!