STEEL STEERING BUSHING (2+2)

ADJ. TURNBUCKLE L/R 40 MM - HUDY SPRING STEEL (2)

XRAY T2 Alu Scheiben - 3x6x2.0mm (10 Stück)

Alu Shim 3 x 6 x 3.0mm (10 pieces)

ALU SHIM 3x6x4.0MM - SILVER (10)

Antenna

ANTI-ROLL BAR BALL JOINT 5.8 MM (2 pieces)

FLYWHEEL COLLAR 7MM - NOVAROSSI

FLYWHEEL NUT - HUDY SPRING STEEL™

SHIM 5x7x0.2 (10)

Alu Drive Flange with One-Way Bearing - Swiss 7075 T6

Composite 2-Speed Gear Box Show Set

Composite 2-Speed Gear 46T 2nd

Composite 2-Speed Gear 49T 1st

Adapter 2-Speed

Gear Box Spring C=13 (2)

XCA Alu 7075 T6 Hard Coated Pinion Gear 16T 1st

XCA Alu 7075 T6 Hard Coated Pinion Gear 19T 2nd

Body Clip (10)

New XRAY GTX8 & GTXE C-Hub Front Suspension Conversion Set • Complete conversion set • For GTX platform • Increases steering • Reduces tire wear • More responsive handling • Faster best lap time • Faster average run Complete C-hub conversion set for GTX platform fits both nitro and electric powered GTX. The C-hub suspension is suited for most standard track conditions and...

The chassis length is increased to stretch the wheelbase, combined with the wider rear section, resulting in improved stability. The update also includes mounting provisions to install both the front and rear suspension holders directly to the chassis plate and the rear diffusor. The chassis features the locking system of the GTX 2022 for the servo saver posts, to ensure the...

Genuine spare and option parts from XRAY.

Composite Front Upper Bumper

Foam Bumper

The bulkhead block plate raises the front differential height and improves the driveshaft angles, creating more traction on corner exits while improving mid corner rotation. The improved driveshaft positioning also helps to extend the service intervals of the driveshafts CV joints and pins as well as the outdrives.

The diffusor is used in the rear of the car and helps to increase down force for improved stability and easier control at high speeds.

The bulkhead block plate raises the rear differential height and improves the driveshaft angles, creating more traction on corner exits while improving mid corner rotation. The improved driveshaft positioning also helps to extend the service intervals of the driveshafts CV joints and pins as well as the outdrives.

The bumper brace is made from rigid composite material and reinforces the front bumper assembly while also protecting the front of the car in hard impacts. The redesigned brace features openings for additional air cooling of the differential.

Genuine XRAY spare and option parts!

Composite Front Holder for Body Posts

Composite Body Posts (2 pieces)

Composite Rear Holder for Body Posts

Composite Center Body Post Holder

The diff bulkheads have been designed for extreme durability, while providing easy access for tuning and maintenance. Diff bulkheads are an important chassis component, housing both the front and rear differentials and providing mounting points for the suspension mounts and shock towers. To improve the consistency of the differential performance throughout each run, the gear...

The shock tower matches the updated geometry of the GTXE and GTX. It features different shock mount and camber link positions and is overall lower compared to previous versions.

Composite Front Brace

C-Hub Composite Front Lower Suspension Arm - Medium

XT9 2013 Composite Bushing & Ball Mount Set (2+2)

Original parts from XRAY!

Specially developed for the GT onroad platform. After extensive tests of various caster angles, the final 6° caster was selected as the best choice to work with the wide range of racing conditions found at GT events. The C-Hub geometry significantly improves steering characteristics over the previous 16° hubs. The reduced caster angle also helps to reduce tire wear, creating...

Specially developed for the GT onroad platform. After extensive tests of various caster angles, the final 6° caster was selected as the best choice to work with the wide range of racing conditions found at GT events. The C-Hub geometry significantly improves steering characteristics over the previous 16° hubs. The reduced caster angle also helps to reduce tire wear, creating...

Steel C-Hub Bushing (2 pieces)

Composite Eccentric Bushing - Square Adj.Roll-C. (2)

Front suspension holders are separated from the bulkheads and installed on the chassis. Mounting the holders directly to the chassis plate eliminates any flex from the bulkheads, improving the precision and responsiveness of the GT. The front kick-up angle was reduced, helping to create more steering and reduce tire wear. The updated aluminum suspensino holders continue to...

Front suspension holders are separated from the bulkheads and installed on the chassis. Mounting the holders directly to the chassis plate eliminates any flex from the bulkheads, improving the precision and responsiveness of the GT. The front kick-up angle was reduced, helping to create more steering and reduce tire wear. The updated aluminum suspensino holders continue to...

Graphite steering block plate improves corner entry steering by increasing the outside wheel angle.

The alu shock plate allows to mount the shock absorbers more in an outside position which helps to increase corner speed and improves the stability of the car.

Ball Joint 5.8 (8)

XB8 2014 Front Anti-Roll Bar 2,5mm

The servo saver features a redesigned conical spring that is longer and stronger. The spring ensures more precise steering and improved reliability. The servo saver posts features an updated locking system that keys into the chassis plate to ensure the servo saver setting will not change while running. To improve the servo saver reliability (especially in dusty conditions),...

Graphite Parts Servo Saver

Genuine XRAY spare and option parts!

Steering Plate Bushing (2)

Alu Steering Plate Swiss 7075 T6 - 3mm

XB8 2014 Adj. Turnbuckle M4 L/R 52.5mm - Hudy Spring Steel™ (2)

Adjustable Turnbuckle M5 L/R 46mm HUDY Spring Steel (2 pieces)

Ball Stud 6.8mm (4)

Pivot Ball 6.8mm Backstop M3 (2)

Composite Steering Ball Joint 6.8mm - V2 (2)

XB8 2014 Composite Relief Steering Ball Joint 6,8 mm (2)