COMPOSITE C-HUB RIGHT - 6° DEG. - HARD

Genuine XRAY spares!

Genuine XRAY spares!

Genuine XRAY spares!

Genuine XRAY spares!

Top deck was designed to work with the center layshaft location in the middle of the chassis. The top deck is perfectly symmetrical to achieve the ideal, consistent flex behavior. This 1.6mm graphite top deck is recommended for use in low- to medium-traction conditions with the alu chassis. The top deck can be mounted via connecting stand using these flex alternatives: 1.)...

ALU COUNTERSUNK SHIM (4)

IMPACT ABSORBING FRONT BUMPER

New T4'20 Graphite Bumper Upper Holder Brace 3.0mm • Reinforces bumper assembly • Reduce chassis breakage in serious crashes • Machined from premium graphite material • 3.0mm thick • Fits T4'20 Graphite bumper upper holder brace helps to reduce chassis breakage in serious crashes. The graphite bumper upper holder brace is mounted on the top composite or graphite upper holder...

Genuine XRAY parts for your T4! Official replacement for 301213. Can be used instead of this.

Genuine XRAY parts for your T4! Official replacement for 301228

FRONT BODY MOUNT SET +1MM HEIGHT Do you need the bumper posts as well? Partnumber 301321 for the low bumper (T4, T4 2014) or 301325 for the high bumper (all T2 and T3)

FRONT BODY MOUNT SET +2MM HEIGHT Do you need the bumper posts as well? Partnumber 301321 for the low bumper (T4, T4 2014) or 301325 for the high bumper (all T2 and T3)

Genuine XRAY parts for your T4!

Genuine XRAY parts for your T4!

Genuine XRAY parts for your T4!

Genuine XRAY parts for your T4!

Very handy, easily externally adjustable body post from Swiss 7075 T6 aluminum. Allows for adjustment of body height by 3mm without needing to change the position on the body post. Fits T2, T3, T4, X4 cars (front & rear) and NT1 cars (front only).

T4 2014 Alu Adjustable Body Post Stop (2)

Locknut for Alu Adjustable Body Post Stop - orange (2 pieces)

Original XRAY spare and option parts!

The new feature of the T4'20 arms is to mount the shocks lower. To use this option you need to use optional low ULP shock towers which allows you to mount shocks 4mm lower to lower the CG. With the lower shock mounting, the car is more stable as it rolls less, is easier to drive over chicanes, and has improved steering response. Recommended for medium-high technical tracks,...

The SLP (Super-Low Profile) shock towers allow to mount the shocks lower to lower the CG. With the lower shock mounting, the car is more stable as it rolls less, is easier to drive over chicanes, and has improved steering response. Recommended for medium-high technical tracks, especially for carpet. Made from 3.0mm thick premium-grade graphite material to guarantee maximum...

These beautiful 7075 T6 aluminum adjustable ball-bearing hubs are direct replacement of the standard composite ones included in the kit. The aluminum hubs reduce the friction and make the car to run more free with increased the drivetrain efficiency. Suggested especially for stock class where super low friction drive train is important. The aluminum hubs are stronger and...

Genuine XRAY optional for your car!

Genuine XRAY optional for your car!

Completely redesigned front long suspension arm is 7mm longer than the short arms, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces. The front RIGHT suspension arm features a standard shock mounting position as well as a new 4mm lower position to lower the CG (must be used with optional lower ULP shock tower)....

Completely redesigned front long suspension arm is 7mm longer than the short arms, which helps to generate more grip in low traction conditions and improves stability on higher traction surfaces. The front RIGHT suspension arm features a standard shock mounting position as well as a new 4mm lower position to lower the CG (must be used with optional lower ULP shock tower)....

T4 2014 Graphite Arm Stiffener Front (2) Important note : The carbon plates are fastened with screws M2.5 with 1.5mm allen head. Therefore it is extremely important to use a hex screwdriver is in a state of 100 %. A hexagon with wear will destroy the screws . It is also necessary to go with caution to the screws . Not tighten too fast , do not fix sloping ! In order to be...

Alu steering blocks with ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum...

GRAPHITE EXTENSION PLATE FOR ALU STEERING BLOCK (2) The graphite extension for alu steering block made from premium-grade graphite material. Allow for easy Ackermann position adjustment for fine-tuning on all surfaces and track conditions.

COMPOSITE STEERING BLOCK - MEDIUM - V2

COMPOSITE STEERING BLOCK - GRAPHITE Suitable for any kind of T2, T3 or T4.

Works as spare part for 302202.

BALL-BEARING COMPOSITE BUSHING (4)

COMPOSITE C-HUB BUSHING (2+2)

ALU C-HUB FRONT BLOCK - 0° DEG.

ALU C-HUB FRONT BLOCK, RIGHT - 2° DEG. - ORANGE

ALU C-HUB FRONT BLOCK, LEFT - 2° DEG - ORANGE

ALU C-HUB FRONT BLOCK, RIGHT - 4° DEG. - ORANGE

ALU C-HUB FRONT BLOCK, LEFT - 4° DEG - ORANGE

ALU C-HUB FRONT BLOCK, RIGHT - 6° DEG. - ORANGE

ALU C-HUB FRONT BLOCK, LEFT - 6° DEG. - ORANGE

COMPOSITE C-HUB FRONT BLOCK, RIGHT - 4° DEG.

COMPOSITE C-HUB FRONT BLOCK, LEFT - 4° DEG.

Suitable for XRAY T4 2020 ARS Set. Will NOT fit for the front!

Suitable for XRAY T4 2020 ARS Set. Will NOT fit for the front!

Suitable for XRAY T4 2020 ARS Set. Will NOT fit for the front!

Suitable for XRAY T4 2020 ARS Set. Will NOT fit for the front!

Suitable for XRAY T4 2020 ARS Set. Will NOT fit for the front!

Composite C-Hub right 0° Medium (ECS)

Composite C-Hub left 0° Medium (ECS)

COMPOSITE C-HUB RIGHT - 2° DEG. - MEDIUM

COMPOSITE C-HUB LEFT - 2° DEG. - MEDIUM

COMPOSITE C-HUB RIGHT - 6° DEG. - MEDIUM - ECS

COMPOSITE C-HUB LEFT - 6° DEG. - MEDIUM

Composite C-Hub right 0° hard (ECS)

Composite C-Hub left 0° hard (ECS)

COMPOSITE C-HUB RIGHT - 2° DEG. - HARD