• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

Eccentric holder - for 0.25mm wider front in the rear suspension.

Will increase the stiffness of the rear area and reduce flex. Additionaly it will increase the weight (+15g)

Anti Roll Bar for Ball Bearings - Rear 1.1mm

Anti Roll Bar for Ball Bearings - Rear 1.2mm

Anti Roll Bar for Ball Bearings - Rear 1.4mm

Anti Roll Bar for Ball Bearings - Rear 1.5mm

Anti Roll Bar for Ball Bearings - Rear 1.6mm

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2)

Those outdrives will be necessary if you want to use the ECS BB drive shafts. Please combine with the 50mm version (305409).

Those outdrives will be necessary if you want to use the ECS BB drive shafts. Please combine with the 50mm version (305409).

MULTI-DIFF LOCKING AXLE - HUDY SPRING STEEL

Original XRAY spare and option parts! There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best solution between...

ALU SOLID AXLE DRIVESHAFT ADAPTERS - HARD COATED (2) There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best solution...

STEEL SOLID AXLE DRIVESHAFT ADAPTERS - HUDY SPRING STEEL™ (2) There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best...

TIMING BELT PULLEY 38T FOR MULTI-DIFF

ECS (ES) Drive Shaft - 50mm - for 2mm Pin HUDY Spring Steel Fits to 305333 - ECS ES (Extra Strong) Drive Shaft - 50mm - HUDY SPIRNG STEEL (1 piece) or to convert 305332 - ECS ES (Extra Strong) Drive Shaft - 52mm - HUDY Spring Steel(1 Stück).

ECS Drive Shaft 52mm - for 2mm Pin HUDY Spring Steel

T4 POM Blades - extra strong - 3.5mm - ORANGE (4 pcs)

The new ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts. The friction between the driveshaft and the outdrive is greatly reduced, which helps to give a much smoother handling feel, especially on fast direction changes, such as chicanes. The reduced friction helps to increase cornering speeds. We recommend the...

The new ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts. The friction between the driveshaft and the outdrive is greatly reduced, which helps to give a much smoother handling feel, especially on fast direction changes, such as chicanes. The reduced friction helps to increase cornering speeds. We recommend the...

Original XRAY spare and option parts!

Original XRAY spare and option parts!

DRIVE SHAFT 50MM - HUDY SPRING STEEL

DRIVE SHAFT 52MM - HUDY SPRING STEEL

ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM

ECS ES (Extra Strong) Drive Shaft - 52mm - HUDY SPIRNG STEEL 50mm - for low traction and tight asphalt tracks 51mm - for carpet tracks and large asphalt tracks 52mm - for high grip carpet tracks

ECS ES (Extra Strong) Drive Shaft - 50mm - HUDY SPIRNG STEEL 50mm - for low traction and tight asphalt tracks 51mm - for carpet tracks and large asphalt tracks 52mm - for high grip carpet tracks

Original XRAY spare and option parts!

ALU WHEEL HUB - OFFSET "-0.75MM" - BLACK (2) Screws are included!

ALU WHEEL HUB - OFFSET "+0.75MM" (2) Screws are included!

ALU WHEEL HUB - OFFSET "+1.5MM" - BLACK (2) Screws are included! Please note: The thread will not fit 100% to the latest batch of (black) screws. The last few % must be turned in with a higher force so that you re-cut the thread by yourself.

ALU WHEEL SHIM OFFSET 0.75MM (2)

The new ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts. The friction between the driveshaft and the outdrive is greatly reduced, which helps to give a much smoother handling feel, especially on fast direction changes, such as chicanes. The reduced friction helps to increase cornering speeds. We recommend the...

Genuine XRAY spares!

Special composite mix - for less friction and longer wear. Set of 2 pcs in orange colour.

Offset Spur Gear 72T / 48 - HARD

Offset Spur Gear 76T / 48 - HARD

OFFSET SPUR GEAR 78T / 48 - HARD

Offset Spur Gear 79T / 48 - HARD

OFFSET SPUR GEAR 81T / 48 - HARD

SPUR GEAR 84T / 48

XRAY precision molded offset spur gear. This spur gear has been made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. Orange color.

SPUR GEAR 87T / 48

SPUR GEAR 90T / 48

SPUR GEAR 64pitch 90T

OFFSET SPUR GEAR 92T / 64

OFFSET SPUR GEAR 96T / 64

XRAY precision molded offset spur gear. This spur gear has been made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. Orange color.

Genuine XRAY parts. Original is always best!

OFFSET SPUR GEAR 100T / 64

XRAY precision molded offset spur gear. This spur gear has been made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. Orange color.

OFFSET SPUR GEAR 104T / 64

OFFSET SPUR GEAR 106T / 64

OFFSET SPUR GEAR 108T / 64

XRAY precision molded offset spur gear. This spur gear has been made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability. Orange color.

OFFSET SPUR GEAR 112T / 64

OFFSET SPUR GEAR 114T / 64

OFFSET SPUR GEAR 116T / 64