Anti Roll Bar for Ball Bearings - Rear 1.1mm

Anti Roll Bar for Ball Bearings - Rear 1.2mm

Anti Roll Bar for Ball Bearings - Rear 1.4mm

Anti Roll Bar for Ball Bearings - Rear 1.5mm

Anti Roll Bar for Ball Bearings - Rear 1.6mm

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2)

Original XRAY spare and option parts! There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best solution between...

ALU SOLID AXLE DRIVESHAFT ADAPTERS - HARD COATED (2) There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best solution...

STEEL SOLID AXLE DRIVESHAFT ADAPTERS - HUDY SPRING STEEL™ (2) There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best...

T4 POM Blades - extra strong - 3.5mm - ORANGE (4 pcs)

The new ECS BB (Ball-Bearing) driveshafts offer a significant performance gain over the standard blade-type driveshafts. The friction between the driveshaft and the outdrive is greatly reduced, which helps to give a much smoother handling feel, especially on fast direction changes, such as chicanes. The reduced friction helps to increase cornering speeds. We recommend the...

DRIVE SHAFT 50MM - HUDY SPRING STEEL

DRIVE SHAFT 52MM - HUDY SPRING STEEL

ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM

ECS ES (Extra Strong) Drive Shaft - 52mm - HUDY SPIRNG STEEL 50mm - for low traction and tight asphalt tracks 51mm - for carpet tracks and large asphalt tracks 52mm - for high grip carpet tracks

ECS ES (Extra Strong) Drive Shaft - 50mm - HUDY SPIRNG STEEL 50mm - for low traction and tight asphalt tracks 51mm - for carpet tracks and large asphalt tracks 52mm - for high grip carpet tracks

ALU WHEEL HUB - OFFSET "-0.75MM" - BLACK (2) Screws are included!

ALU WHEEL HUB - OFFSET "+0.75MM" (2) Screws are included!

ALU WHEEL HUB - OFFSET "+1.5MM" - BLACK (2) Screws are included! Please note: The thread will not fit 100% to the latest batch of (black) screws. The last few % must be turned in with a higher force so that you re-cut the thread by yourself.

ALU WHEEL SHIM OFFSET 0.75MM (2)

Low Friction Kevlar Drive Belt Front 3x513mm

Low Friction Kevlar Drive Belt Rear 3x189mm

These new orange parts are made from special graphite composite material which will reduce friction. Will fit into any T4, T3 and also T2 008, T2 009 and T2R Pro.

Genuine XRAY parts. Original is always best!

Will add ca. +7g to the total weight. Suitable for any XRAY T4! Genuine XRAY parts. Original is always best!

Genuine XRAY parts. Original is always best! Will be used instead of the graphite part 306530. Weight difference compared to 306530: + ca. 4.4 gr

Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range. The battery holders allow to mount the battery tape over the top of the battery only without the...

Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range. The brass material adds extra 7.5g weight for additional weight balance adjustment of the battery side of...

CNC-machined battery backstop for the adjustable battery holder for positioning batteries fore-aft/left-right. Designed for the slim battery pack. Quick & easy weight transfer adjustment. Made from 3.0mm premium-grade graphite material. TAKE CARE: It's not a complete battery mount. It's just an upgrade for the existing mount.

T4 2014 Alu Top Deck Mount - Orange Take care: XRAY says that it's also possible to use this part at the XRAY T4 2018. Without modifications this is NOT possible. You need to reduce the diameter of the post by grinding it.

Titan Suspension Pivot Pin (2)

Titan Suspension Pivot Pin (2)

Titan Suspension Pivot Pin (2)

Pistons which will fit only when used with PSS system 308039!

Genuine XRAY parts. Original is always best! TAKE CARE! There is a mistake in the manual of T4 2020. Also the correction of the PDF manual might be still complicated. 308029 = ULP = kit shocks 308308 - ULTRA low profile => SHORT 308039 = SLP = optional shocks 308307 - SUPER low profile => LONG

ALU XRAY SHOCK SPRING RETAINING COLLAR (4)

ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4)

T4 Alu Progressive Shock System - Set (2) - PSS Will fit to each kind of T4. Dampers 308307-O are necessary. No complete dampers, only optionals to upgrade your existing dampers! Innovative progressive shock system for touring cars for improved traction and steering characteristics. Shock insert has 3 triangle cuts and is used with piston without holes. The hardness of the...

XRAY 308264 - T4 4S Federn - progressiv - C=2.5-2.8 (2 Stück) length: ca. 20mm inner diameter: ca. 14mm

XRAY 308274 - 4S SPRING-SET C = 2.3 (2) length: ca. 20mm inner diameter: ca. 14mm

XRAY 308277 - 4S SPRING-SET C = 2.9 (2) length: ca. 20mm inner diameter: ca. 14mm

4S SPRING-SET C=3.0 (2) length: ca. 20mm inner diameter: ca. 14mm

T4 ALU SHOCK ABSORBER-SET - BLACK(2)

T4 ALU SHOCK ABSORBER-SET - ORANGE (2)

Genuine XRAY spare parts.

Genuine XRAY spares!

T3 2011 SPECS SET OF CERAMIC BALL BEARINGS (14)

PRECISION BALANCING CHASSIS WEIGHT CENTER 20 G

Brass Battery Backstop +4.9g of weight.

CNC-machined 40g chassis weights made from brass material and additionally black coated for astonishing look. Allows to mount the shorty battery into the center of the chassis for perfect distribution of the weight. Low profile of the weights allows to lower the weight of the car which helps to make the car easier to drive, more stable in the chicanes but at the same time...

Alu Rear Wing Shim (2)

XRAY T4 STICKER FOR BODY - WHITE

ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4)