T4 2014 Graphite Steering Plate Set

Those screws are recommened to reduce the play in the T4 alu steering. How to use? Check the video of Alexander Hagberg: https://www.facebook.com/alexander.hagberg/videos/957117651161275/

ADJ. TURNBUCKLE L/R 40 MM - HUDY SPRING STEEL (2)

ALU ADJ. TURNBUCKLE M3 L/R 39 MM - ORANGE - SWISS 7075 T6 (2 pieces)

BALL END 4.9MM WITH THREAD 10MM (2 pieces)

Replacement for the spring steel ball heads with thread. You need to combine them with a standard set crew. So you will be able to modify the thread length by yourself. The usage of thread lock is recommended! What's the advantage of this ball heads? 1. You will save weight. 2. You will save money. No need for a lot of different lengths.

COMPOSITE BALL JOINT 4.9MM - CLOSED (4 pieces)

COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8)

• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

T4 ALU LAYSHAFT BULKHEAD L/R - ORANGE

T4 Alu Layshaft Bulkhead Closed L/R

LiPo CHASSIS GRAPHITE MOTOR GUARD

Genuine spare and option parts from XRAY!

T4 2014 - Alu Shims (3x6x0.5mm) - black

T4 2014 - Alu Shims (3x6x0.5mm) Will be delivered BULK.

Alu Shim 3x5x1.0mm - ORANGE (10 pieces)

Alu Shim - 3x5x0.5mm - BLACK (10)

XRAY 303142-O - T4 Alu Shim - 3x5x0.5mm - Orange (10)

T4 Alu Shim 3x5x0.25mm (10)

XRAY 303142-O - T4 Alu Shim - 3x5x4mm (10)

XRAY 303142-O - T4 Alu Shim - 3x5x4mm - Orange (10)

X4 / T4 Alu Shim - 3x5x6mm - SILVER (2)

T4 2014 Rear Suspension Arm - Graphite

The aluminum suspension arm is a direct replacement for the standard composite graphite arm. The aluminum arm works well on high traction or permanent carpet tracks as it makes the car easier to drive with less stopping and better cornering speed. The arms are available for front and rear and are available either individually or as a set. Features a single optimized shock...

T4 2014 Graphite Rear Arm Stiffener (2) Important note : The carbon plates are fastened with screws M2.5 with 1.5mm allen head. Therefore it is extremely important to use a hex screwdriver is in a state of 100 %. A hexagon with wear will destroy the screws . It is also necessary to go with caution to the screws . Not tighten too fast , do not fix sloping ! In order to be...

REAR TURNBUCKLE L/R 26 MM - HUDY SPRING STEEL (2)

ALU ADJ. TURNBUCKLE L/R 26 MM - ORANGE - SWISS 7075 T6 (2 pieces)

COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT - MEDIUM

COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - MEDIUM

COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT - HARD

Alu Upright Rear 2° Outboard Toe-In (L+R) This alu upright use the bearings 940509.

COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - MEDIUM

COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - 1-HOLE - MEDIUM

COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - HARD

T4 Anti-Roll Bar Rear 1.6mm

ALU LOWER 2-PIECE SUSPENSION HOLDER (1 Piece)

T4 2014 ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - FRONT Does NOT fit into T4 2017.

XRAY 303712-O - T4 2016 - Alu ARS Suspension Mount - splitted - right

XRAY 303713-O - T4 2016 - Alu ARS Suspension Mount - splitted - left

• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

Alu lower RIGHT suspension holder CNC-machined from premium Swiss 7075 T6 aluminum. Suitable for standard rear suspension, also suitable for ARS with extra roll center positions. The lower design of the suspension holders helps to generate more traction. Recommended for use on asphalt tracks with low-to-medium traction. Must be used with: left alu holder #303717-O and Rear –...

Alu lower LEFT suspension holder CNC-machined from premium Swiss 7075 T6 aluminum. Suitable for standard rear suspension, also suitable for ARS with extra roll center positions. The lower design of the suspension holders helps to generate more traction. Recommended for asphalt tracks with low-to-medium traction. Must be used with: right alu holder #303716-O and Rear – rear...

Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead, with 0.25° eccentric suspension mount holes. The eccentric holder stands allow more precise toe-in setting with 0.25° increments. Suspension holders are CNC-machined from premium Swiss 7075 T6 aluminum, and provide the lightest & strongest possible support framework for the car.

• 3x heavier than alu holders • Eliminates need for additional chassis weights • Eliminates negative chassis flex • Equal weight addition left & right • Available for front or rear suspension Brass suspension holders were created to add additional weight to the car to attain the minimum weight limit, and to replace other chassis-mounted weights which negatively influence...

Authentic XRAY alu rear lower suspension holder for the REAR of the rear bulkhead of T4. The lower design of the suspension holders helps to generate more traction. Recommended for asphalt tracks with low-to-medium traction. Must be used with: right alu holder #303716-O and Left alu holder #303717-O. Suspension holders are CNC-machined from premium Swiss 7075 T6 aluminum and...

XRAY GEAR DIFFERENTIAL - SET

XB4 2016 - Graphite Gear Diff Gears - LOW (2+4) Replacement for 304931

GEAR DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2)

ALU BALL DIFFERENTIAL 34T + 38T PULLEY - 7075 T6 - SET

Alu T6 Diff Long Output Shaft - Hard Coated

ALU T6 DIFF LONG OUTPUT SHAFT - HARD COATED - BLACK

ALU T6 DIFF SHORT OUTPUT SHAFT - HARD COATED - BLACK

SCREW FOR EXTERNAL DIFF ADJUSTMENT - HUDY SPRING STEEL™

DIFF PULLEY 34T WITH LABYRINTH DUST COVERS

DIFF PULLEY 38T WITH LABYRINTH DUST COVERS

MULTI-DIFF LOCKING AXLE - HUDY SPRING STEEL

Original XRAY spare and option parts! There are several types of spool outdrives: 305134 - Springsteel - 8.28g - durable, heavy, allround solution 305135 - Composite - 4.00g - light, without blades, for stock semi-pro drivers 305136 - Alu - 3.56g - very light, with blades, for stock pro-drivers 305137 - Springsteel LIGHTWEIGHT - 6.71g - durable, best solution between...