ALU SHIM 3x6x1.0MM - BLACK (10)

ALU SHIM 3x6x1.0MM - ORANGE (10)

ALU SHIM 3x6x2.0MM - BLACK (10)

ALU SHIM 3x6x2.0MM - ORANGE (10)

Alu shims 3x7mm, which can be used for various purposes. These shims can be used for ride height and roll center adjustment, they fit perfectly under the front arm mount plate and graphite lower suspension arm stands. Orange color. Set of 10.

Alu shims 3x7mm, which can be used for various purposes. These shims can be used for ride height and roll center adjustment, they fit perfectly under the front arm mount plate and graphite lower suspension arm stands. Orange color. Set of 10.

ALU ANTI-ROLL BAR BALL JOINT 5.8 MM - SWISS 7075 T6 - HARD COATED (2 pieces)

SPRING C=7.8 FOR GEAR BOX - MEDIUM - SILVER (2 pieces)

Side guards with incorporated larger bottom radius to make the car more stable on rough tracks, and increase the car’s longitudinal flex. The side guards are molded from SOFT composite mixture for increased flex to generate more traction. The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal...

XB8 2016 Graphite Upper Plate

XB8 Carbon Shock Tower front 4mm

Composite Bearing Hub for Diff (4)

C-Hub Composite Front Lower Suspension Arm - Medium

C-Hub Composite Front Lower Suspension Arm - Graphite

GRAPHITE-hardness front UPPER suspension arm made from high-tech graphite composite material. Universal design allows the arm to be used on both left & right sides.

MEDIUM-hardness front UPPER suspension arm made from high-tech composite material. The exclusive composite mixture used for suspension arms gives a perfect balance between reliability and performance; the suspension arm is rigid enough for a responsive feel, yet soft enough for extreme durability. The medium-hardness arm is suitable for most track conditions, especially...

PB Composite Steering Block

PB Composite Steering Block Graphite

Original parts from XRAY!

Anti-Roll Bar 1.6mm Front

Anti-Roll Bar 1.8mm Front

Anti-Roll Bar 2.0mm Front

XB8 2014 Front Anti-Roll Bar 2.2mm

XB8 2014 Front Anti-Roll Bar 2.3mm

XB8 2014 Front Anti-Roll Bar 2,5mm

XB8 2014 Front Anti-Roll Bar 2.6mm

Ball Stud 6.8mm (4)

Ball Stud 6,8mm With Backstop L=6mm - M3x8 (2 pieces)

XB8 2016 Graphite Rear Shock Tower CNC Machined 3.5mm

Composite Rear Lower Suspension Arm - Hard

Composite Rear Lower Suspension Arm - Graphite

Composite Rear Lower Suspension Arm - Graphite

Lightweight composite mud guard for rear suspension arms protects the rear drivetrain in wet & dirty track conditions. Set of L+R. Fits both longer and shorter rear suspension arms on XB8 (2014 and later), XB808, XB9 and GTX cars.

Graphite Braces for Chassis Side Guards Set

XB8 2016 Graphite Braces for rear Composite Brace Set PAY ATTENTION: The manual of your GTXE 2022 says that you can use 353281 as an optional stiffener for your car. This is WRONG. You will need THIS stiffener instead of :-)

Alu Rear Lower Susp. Holder +2mm - Rear (7mm) - RR - Swiss 7075 T6

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Lightweight yet ultra-strong rear upright molded from special graphite composite material. Features larger outside 8x16x5mm ball-bearing for increased reliability and life-span. Graphite rear upright is very strong and makes the rear of car very stable, yet is very light taking some load off of the rear suspension. Improves bump absorbing and handling on bumpy tracks. To...

The rear uprights were redesigned and feature larger outside 8x16x5mm ball-bearings for increased reliability and life-span. To extend the set-up alternatives, an additional lower roll-center adjustment position was added. The smart design allows the same upright to be used on both left & right sides. The lower suspension pin on which the rear upright sits features 2 shims...

Genuine spare and option parts by XRAY!

Rear Anti-Roll Bar 2.0mm

XB8 2014 Rear Anti-Roll Bar 2.2mm

XB8 2014 Rear Anti-Roll Bar 2.4mm

XB8 2014 Rear Anti-Roll Bar 2.5mm

XB8 2014 Rear Anti-Roll Bar 2.6mm

Rear Wing

Rear Wing polycarbonate - 200mm wide

Rear Wing - Black

Rear Wing Posts

Composite Adj. Shim For Rear Wing Plate (2)

Alu Rear Wing Mount Brace (2)

Alu Rear Wing Shim (2)

Center Diff Mounting Plate Set

Graphite Center Diff Mounting Plate

Composite Bushing for Diff Mounting Plate (2)

Genuine XRAY spare and optional parts - perfect for your XRAY!

Glued Brake Pad Set - Ultra-Efficient (4)

Bremsbelag PTFE (4)

XB8 2017 Front/Rear Diff Large Bevel Gear 44T

XB8 2017 Front/Rear Diff Large Bevel Gear 45T