Alu shims 3x7mm, which can be used for various purposes. These shims can be used for ride height and roll center adjustment, they fit perfectly under the front arm mount plate and graphite lower suspension arm stands. Orange color. Set of 10.

ALU ANTI-ROLL BAR BALL JOINT 5.8 MM - SWISS 7075 T6 - HARD COATED (2 pieces)

Side guards with incorporated larger bottom radius to make the car more stable on rough tracks, and increase the car’s longitudinal flex. The side guards are molded from SOFT composite mixture for increased flex to generate more traction. The composite side guards protect the car, muffler, and fuel tank from side impacts. The side guards perfectly fit the chassis and seal...

Original spare and option parts for your XRAY kit!

XB8 2016 Graphite Upper Plate

Replacement part for the XT8 Alu Suspension Conversion Kit 350906

Replacement part for the XT8 Alu Suspension Conversion Kit 350906

Replacement part for the XT8 Alu Suspension Conversion Kit 350906

Anti-Roll Bar 1.6mm Front

Anti-Roll Bar 1.8mm Front

Anti-Roll Bar 2.0mm Front

XB8 2014 Front Anti-Roll Bar 2.2mm

XB8 2014 Front Anti-Roll Bar 2.3mm

XB8 2014 Front Anti-Roll Bar 2,4mm

XB8 2014 Front Anti-Roll Bar 2,5mm

Adj. Turnbuckle M4 L/R 91mm - Hudy Spring Steel™ (2)

XB8 2016 Graphite Braces for rear Composite Brace Set PAY ATTENTION: The manual of your GTXE 2022 says that you can use 353281 as an optional stiffener for your car. This is WRONG. You will need THIS stiffener instead of :-)

Graphite Braces for rear Composite Brace Set PLEASE TAKE CARE: This stiffener will not fit into your GTXE 2022 - even if your manual tells you that it will work. You will need 353280 instead of 353281!

Lightweight yet ultra-strong rear upright molded from special graphite composite material. Features larger outside 8x16x5mm ball-bearing for increased reliability and life-span. Graphite rear upright is very strong and makes the rear of car very stable, yet is very light taking some load off of the rear suspension. Improves bump absorbing and handling on bumpy tracks. To...

Genuine spare and option parts by XRAY!

Rear Anti-Roll Bar 2.0mm

XB8 2014 Rear Anti-Roll Bar 2.2mm

XB8 2014 Rear Anti-Roll Bar 2.4mm

XB8 2014 Rear Anti-Roll Bar 2.5mm

XB8 2014 Rear Anti-Roll Bar 2.6mm

XB8 2014 Rear Anti-Roll Bar 3.2mm

Rear Wing polycarbonate - 200mm wide

Genuine XRAY parts!

Genuine XRAY parts!

Original XRAY Sparepart!

Center Diff Spur Gear 48 Teeth large

Center Diff Spur Gear 49 Teeth large

Precision-ground polished steel pin 3.5 x 33 mm for internal satellite gears used in large center differential #355013. Mounted in steel inserts instead of directly mounted in differential case increases the lifetime, especially in high temperatures. Set of 2.

Precision-ground polished alu pin 3.5 x 26.6 mm for internal satellite gears used in large front & rear differentials 01-355004 and 01-355005. Mounted in steel inserts instead of directly mounted in differential case increases the lifetime, especially in high temperatures. 30% lighter than steel pins. Set of 2.

Adjustable CVD Drive Axle - HUDY Spring Steel (2 pieces)

XB9E Pinion Gear 12T

Steel Pinion Gear 13T

Steel Pinion Gear 14T

Steel Pinion Gear 15T

Steel Pinion Gear 16T

Steel Pinion Gear 17T

Genuine spare and option parts by XRAY!

Composite Servo Shims 1.0, 1.5, 2.5mm (2+2+2 pieces)

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Set of composite molded shock pistons for two shock absorbers. Two-way flow shock pistons work in different ways when the piston travels up or down. With the rubber valve installed on the piston, 2 holes are closed when piston travels up… then when the piston travels down, the valve opens 2 extra holes so the oil flows through 10 holes in total. This configuration allows for...

Genuine spare and option parts by XRAY!

Shock Rubber Membrane Cell - Medium (4 pcs)

Soft version

Rear Shock Shaft (2 pieces)

HEX SCREW SH M4x7 With Hex From Bottom (4 pcs)

Original spare parts from XRAY.

Original spare parts from XRAY.

Original spare parts from XRAY.