NARROW PINION GEAR ALU HARD COATED 21T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 22T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 23T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 24T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 25T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 27T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 34T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

NARROW PINION GEAR ALU HARD COATED 35T 64dp Suitable for 1/10 (1/12, etc.) cars with 3.17mm shaft diameter.

T4 2015 Alu Servo Mount - BLACK (2)

T4 2015 Alu Servo Mount - BLACK (2)

T4 ALU SHOCK ADJUSTABLE NUT - BLACK

T4 ALU SHOCK ADJUSTABLE NUT - ORANGE

T4 SHOCK FOAM INSERT (4)

XRAY 308264 - T4 4S Federn - progressiv - C=2.5-2.8 (2 Stück) length: ca. 20mm inner diameter: ca. 14mm

XRAY 308274 - 4S SPRING-SET C = 2.3 (2) length: ca. 20mm inner diameter: ca. 14mm

XRAY 308275 - 4S SPRING-SET C = 2.5 (2) length: ca. 20mm inner diameter: ca. 14mm

XRAY 308277 - 4S SPRING-SET C = 2.9 (2) length: ca. 20mm inner diameter: ca. 14mm

4S SPRING-SET C=3.0 (2) length: ca. 20mm inner diameter: ca. 14mm

Alu Cap For XRAY Shock Body #308322 - Orange

COMPOSITE SHOCK PARTS - REBOUND HOLE - SHORT

T4 ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2)

XRAY SPRING-SET C = 2.4 (2)

T3 / X1 Tuning Federn - C=2.6 (2 Stück)

XRAY 308376 - T3 / X1 Tuning Federn - C=2.8 (2 Stück)

XRAY SPRING-SET C = 3.0 (2)

XRAY SPRING-SET C = 3.2 (2)

XRAY SPRING-SET C = 3.4 (2)

XRAY 308387 - X1 / T2 / T3 Optinal Springs - C=4.5 (4 pcs)

Alu Mount 3x6x10.5mm - (2 pcs)

SHIM 5x7x0.2 (10)

SHIM 5x7x0.3 (10)

BALL END 4.9MM WITH THREAD 5MM (2)

BALL END 4.9MM WITH THREAD 8MM (2) Replacement for XRAY 302654

BALL END 4.9MM WITH THREAD 10MM (2)

Graphite Chassis - 2.0mm

Alu 7075 T6 Chassis - 2.0mm

Alu 7075 T6 Chassis - 2.0mm - Flex

Graphite Chassis - 2.0mm

X1 chassis CNC-machined from 2mm premium Swiss 7075 T6 aluminum and additionally black coated. Designed & developed to increase traction, stability, and steering in specific conditions. The alu chassis provides better control and makes the car easier to drive. Recommended for high and very-high traction tracks. 24mm narrower than previous chassis versions, eliminating...

Genuine XRAY lower deck! For high traction tracks!

Graphite Chassis 2.0mm

Chassis design, layout, and flex have significant influence on the handling of the X1. The 2.5mm chassis made from harder graphite material was developed for very-high traction conditions, or when using tires that offer a lot of steering which makes the car more difficult to drive. This chassis makes the car more stable and easier to drive, and eliminates oversteering. The...

The chassis features extra holes which allows to move the whole suspension more forward to extend the wheelbase of the car. The chassis features 3 wheelbase adjustment positions. The full backward position is identical to the original X1 chassis wheelbase. The other two extra positions extends the wheelbase of the car by 4 and 8mm. The longer the wheelbase is, the car is...

Especially made for high grip surfaces. Same style and thickness as 371021 - but much stronger!

Especially made for high grip surfaces.

Same style als 371026 - also same thickness. But different type of graphite. Much harder, even if it looks the same. If you want the hardness of an alu lower deck and the weight of a graphite lower deck this should be your choice.

Alu Chassis 2.0mm Please use always with a 2.0mm thick pod, like 371154

CNC-machined X12’20 chassis made from 2.5mm high-grade graphite material with a specially-designed compound for low-, medium-, and high-traction tracks. The graphite material is softer than aluminum, allowing the chassis to generate more traction. The chassis was redesigned with a significantly narrower shape that ensures the chassis will not have drag in high speed corners...

CNC-machined X12’20 chassis made from 2.0mm Swiss 7075 T6 aluminum which is suitable for high- and very-high traction US-style tracks. This chassis makes the car easier to drive, keeps more cornering speed, and helps prevent traction rolling. The chassis was redesigned with a significantly narrower shape that ensures the chassis will not have drag in high speed corners which...

CNC-machined from Swiss 7075 T6 aluminum, this X12`20 chassis contains special cutout openings for increased flex. This chassis is recommended for and works extremely well on medium and high-traction tracks; not recommended for very-high traction conditions, where the 371114 Alu Chassis works better. This alu flex chassis generates more traction and gives improved steering....

Genuine XRAY parts!

Genuine XRAY parts!

Genuine spare and optional parts from XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

Genuine spare and option parts by XRAY!

GRAPHITE 2.0MM REAR POD LOWER PLATE

GRAPHITE 2.5MM REAR POD LOWER PLATE

X1 Alu Rear Pod Plate - 2.0mm 7075 T6

Graphite Rear Pod Lower Plate - 2.0mm