Pimp up your M-Chassis!

Pimp up your M-Chassis!

TAKE CARE: Yeah Racing includes just a 38T gear. The standard gear of M-05 / M-06 has 39T. If you want to build the diff with 39T you will need TAMC-024 additional Gear Diff for Tamiya M-05 / M-06 - complete set, only oil is necessary. Whats included? Only the gear diff set. Not a complete car, no shafts, no other gears.

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Upgrade your M-07 with alu parts by YEAH RACING!

Upgrade your car with alu parts by YEAH RACING!

Rear suspension mount for Tamiya's M07, features a slot in ball to prevent the suspension from binding when the suspension pin is at an angle due to toe-in settings. Made from aluminum which will provide more stability and accuracy when setting up the rear toe in!

Upgrade your car with alu parts by YEAH RACING!

Upgrade your suspension with alu parts by YEAH RACING!

Competition grade Gear Differential featuring two different diff halves which allows the running of different internal ratios for either running stock ratio or a lower and thus resulting in higher top speed. Steel outdrives for low wear and direct power transfer!

Upgrade the Servo Link, Camber link and steering linkages to titanium with this value set! M3 x 18mm Titanium Turnbuckle (6 pcs) M3 x 105mm Titanium Turnbuckle (1 pcs) 10mm Ball End (8 pcs) 13mm Ball End (4 pcs) 15mm Ball End (2 pcs)

Install this rear hub in either way on your Tamiya M07 to get either 210 or 225mm wheelbase! Specially designed camberlink position so when you install this rear hub either way the camber link remains at the same angle which does not alter your existing camberlink settings. Set of two pieces.

Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficency due to the shock tower not flexing!

Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficency due to the shock tower not flexing!

Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficency due to the shock tower not flexing!

Graphite shock tower for higher lateral strength, reducing weight at a higher area which moves the center of gravity lower which gives you a more stable driving car! Being stiffer means that you get more suspension efficency due to the shock tower not flexing!

Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.

Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.

Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.

Aluminum steering rack takes away most of the slop found in the original part, features bearings allowing for smooth and direct steering input!

Upgrade the Servo Link, Camber link and steering linkages to titanium with this value set!

Graphite parts, whilst having a similar weight the strength is greatly increased whilst comparing to plastic! Also gives a more race car look with graphite parts.

Aluminum chassis brace for Tamiya's M08, adding stiffness to get more performance out of your tires by stiffening up your chassis!

Aluminum chassis brace for Tamiya's M08, adding stiffness to get more performance out of your tires by stiffening up your chassis!

Yeah Racing is now introducing the performance upgrade kit especially designed for Tamiya M07. Yeah Racing has also taken the initiative to improve the C-Hubs into a ball bearing featured option, a mechanical element that constrains relative motion and reduces friction between moving parts, and to facilitate the desired motion and achieve the desired degree of movement as...

Upgrade your M-07 with alu parts by YEAH RACING! This set contains: - bumper - shock tower front and rear - suspension holder rear - suspension holder front - motor heat sink - steering set

Genuine BANDO belt!

Lightweight front axle for Tamiya's T3-01, reduces the weight on the front end and increases stiffness over the stock plastic part.

Yeah Racing Carbon fibre "flipper" piece for Tamiya's T3-01 Trike! Secured with screws so they don't pop out as easily as the stock part!

G45 Steel Drive Axle for Tamiya's T3-01 Trike! A change back to the traditional axle style of mounting for a more secure way of installing wheels! Included are a set of shims for you to change the trackwidth!

Upgrade the Servo Link, Camber link and steering linkages to titanium with this value set!

Graphite body post stiffener allowing for a more rigid body mounting method.

Graphite body post stiffener allowing for a more rigid body mounting method.

Aluminum cover fitting a large variety of Tamiya's gear differentials, being made of aluminum allows for a more even install of the differential and reduces the amount of deformation of the differential by acting as a stiffener!

Gain smoother cornering on your Tamiya tourer with these double jointed driveshafts! For: Tamiya TA06 TA08 Material: Spring Steel Color: Brown Replace : Tamiya 42216

Reduce the chassis flex due to the plastic tub with this carbon stiffening brace set! Comes in two pieces so you can fine tune the flex characteristics!

Reduce the chassis flex due to the plastic tub with this front carbon stiffener!

Increase suspension efficiency with these aluminum rocker arms to reduce suspension flex and get more grip from your chassis!

Increase suspension efficiency with these aluminum rocker arms to reduce suspension flex and get more grip from your chassis!

Chassis stiffener brace for Tamiya's TC-01, which stiffens the front end of your chassis to allow for more predictable steering and more consistent laptimes!

Alu upgrade knuckel for Tamiya's TC-01, fit for either the front or the back! Comes in stealthy anodized black to keep the chassis a uniform black color.

Aluminum damper extenders for using your shocks on Tamiya's TC01! Extends your shocks to the correct length so you get the correct rideheight and downstop settings!

True oil filled gear differential for Tamiya's TT02 and TT01! Design based on 1/10 competition touring car differentials to ensure smoother operation and oil sealed operation! Comes with driveshaft blade protectors to protect driveshafts and differential outdrive! Spare part numbers for this diff: O-Ring housing: XP-10183 O-Ring outdrives: XP-10184 Driveshaft Protectors:...

Spare parts for TATT-020 gear set.

True oil filled gear differential for Tamiya's TT02 and TT01! Design based on 1/10 competition touring car differentials to ensure smoother operation and oil sealed operation! Will work only with the standard plastic shafts! Spare part numbers for this diff: O-Ring housing: XP-10183 O-Ring outdrives: XP-10184 not listed items are not available as a spare part

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.

Aluminum spur gear adaptor plate and spacer set for securely mounting your spur gear on your TT02, this allows for a more flat installation and prevents it from bending under hard acceleration!

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.

Universal swing shafts are made from durable, high quality hardened G45 Steel which means a stronger drivetrain which will translate to better throttle response

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary. TAKE CARE: This means that it will NOT fit plug & play. You need to find some solutions by yourself!

Spare part for the TATT-S04 conversion kit. May also be used for upgrading a standard TT-02 chassis - but other parts (depending on which car you already have) might be necessary.