- height measurement from 3.6 to 8mm - droop measurement from 1 to 9mm (no support blocks needed) Optimized for 1:10 Touring.

1mm increment. Please note that a 15mm support block will be needed.

This is Yeah Racing Aluminum Bearing and Motor Bearing Inner Size Measurer and Tester For 2-15mm. It can measure different bearing dimension, from 2mm - 15mm. As well as motor bearing, with dimension 3.18mm. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: BLUE

Will fit for 1:12, 1:10 and 1:8 shocks.

A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool, you will need only a second to remove ball ends which make it a life saver when you are need a quick fix on the track-side. A must have item for any racers. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black

UPDATE - V3 2022: The setup system does now have a working camber scale. The old version was wrong / out of range. Description: Our Setup System has been redesigned to give r/c racers accurate measurements for their 1/10 on road chassis's. We improved the look and made it even more lightweight. This time we incorporated bearings to keep everything smooth so the friction of...

Setup your M-Chassis car with precision by using these setup wheels! By using these M-Chassis setup wheels you will be sure that the geometry will be as per racing conditions so you will get the most accurate readings possible! Used to measure camber and other things. Also comes with setup wheel nuts, so you don't scratch these setup wheels if you were to use serrated nuts....

Yeah Racing's instrument for making accurate measurements on parts of your car where the utmost amount of accuracy is required. Features a stainless steel construction and a unique sliding rail design which minimizes the amount of error during measurements due to next to none play in these calipers. A screw type adjusting nut allows for locking in measurements for left and...

Spare part for YT-0140.

Setup your 1/28 Racer with ease with this Tool Set! Comes with all the tools you would see used to setup 1/10 Touring Cars, comes with enough tools for you to setup the Droop, Rideheight and Camber. TAKE CARE: It's made for Mini-Z. Mini-Z ist 1/28 scale.

Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!

Ca. 215mm total length.

Ca. 215mm total length.

Replacement setup station lock nuts for either Yeah Racing Setup Station or others. Can also be used with setup discs for 1/10 touring cars!

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Portable soldering iron for lighter packing for either going to the track or heading off to the trails for crawling! Plug into either your 12v supply or 3s pack to power up to temperature in no time! Comes with a chisel tip for efficient heat transfer to soldering either motor or battery leads! Comes with two different plugs for you to DIY the power lead to a suitable length...

Black golden Design.

Black golden Design.

Black golden Design.

All the tools you would ever need at a track day whilst either racing 1/10 touring cars or drifting! Even comes with Lipo bags for when you charge lipo batteries and a body opener for when you want to mount a new body. Feature: For: Car maintenance Include: YT-0187(1 pc) include -1.5mm Hex Wrench (1 pc) -2.0mm Hex Wrench (1 pc) -2.5mm Hex Wrench (1 pc) -3.0mm Hex Wrench (1...

Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm. Feature: For: 4mm / 4.8mm / 5mm / 6mm Ball End Material: Aluminum Color: Black

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance! Besides for touring cars, there is an marked section in the center for marking mini...

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance!

Body Post Trimmer - Multitool Never have rough looking cut body posts again with this body post cutter! Loosen the knob at the end and make sure the little ball is backed off as well then insert your knife and start tightening the knob! In no time you will have very clean cut body posts on your car! The fun doesn't end there, there's also a bevel cut function which makes...

Multi sized hex driver containing 4 hex tips from 1.5mm to 3.0mm in 0.5mm increments. The hex tips are stored inside the handle cap, for easy tip management and storage so that there is a less chance for losing them. Magnetised tips for easy screw pickup. The bits are having the same size (6.35mm) as most of such bits are having.

Toolset including all the tools that you would require to rebuild your entire car! Comes in a neat carrying pouch for you to bring to the track easily and prevent your tools from getting scratched or scratching other things! 3.5mm Nut driver (1 pc) 4mm Nut driver (1 pc) 4.5mm Nut driver (1 pc) #00 Philips screwdriver (1 pc) #0 Philips screwdriver (1 pc) #1 Philips...

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

For the use with 1:10 touring cars. Accurately measure the downstop across all your cars with this downstop gauge which allows you to measure your axle height from the bottom of your chassis! If that is not to your liking, the traditional height from the bottom of the arm can still be measured with the measurements on the gauge paired with traditional 10mm droop blocks....

Accurately check if your 1/8 Onroad car has any form of tweak with this set of bearing supported weighted setup wheels! Place your car on a flat surface and have the weights spun on their side. Slowly lift your chassis and if a side rotates first, means that corresponding side is tweaked. Adjust your spring preload accordingly.

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs

Neatly sort your pit space with this tool stand with three separate compartments to store small parts such as screws and bodyclips! 12.5x9x1.8cm 190g weight Hole diameter: 18.2mm - 10 pcs Including 10 tools with alu handle!

Slim profile screw and parts tray for you to organise your pit table. Magnetic slot at the very bottom to prevent those extra small parts from going missing! 18x4.2x0.6cm 49 g weight

Where should I put the setup system on the table? Yeah Racing answers this question in-house! The aluminum holder holds the Yeah Racing Setup System YT-0140 perfectly and keeps the table tidy. Always within reach and at the same time protected appropriately for its value. Use with other setup systems is also conceivable - but only with the YT-0140 does it fit perfectly and...

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Black golden Design. Spare tips can be used from HUDY or Arrowmax as well.

Genuine Yokomo spare & optional parts! Replacement for B4-821

Genuine Yokomo spare & optional parts!

Antislip Battery Rubber Sheet

Fiberglass Filament Tape (50m x 12mm) (Black)

Goldplug 3 pairs 3,5mm Delivery Content: 3x Goldplug 3,5mm 3x Goldbushing 3,5mm 3x Shrink tube black 3x Shrink tube red

Goldplug 3 pairs 5,5mm Delivery Content: 3x Goldplug 5,5mm 3x Goldbushing 5,5mm 3x Shrink tube black 3x Shrink tube red

Build your own charging wires!

Servo-Anschlusskabel - YUKIUNI - 30cm

Silicone cable - 1.5mm² x 1.000mm - 16AWG - red

Silicone cable - 1.5mm² x 1.000mm - 16AWG - black

Silicone cable - 4mm² x 1.000mm - red

Silicone cable - 4mm² x 1.000mm - black

Silicone cable - 6mm² x 1.000mm - red

Silicone cable - 6mm² x 1.000mm - black

Adapter wire.

Adapter wire.

Balancer Adapter XH Connector-EH Plug - 4S - 30cm

Extension wire.

Extension wire.

Build your own charging wires!

Build your own charging wires!

Build your own charging wires!