Apply these discreet patches to body mount holes for pre- or post-damage reinforcement. 0.5mm thickness 6.5mm internal diameter 18mm outer diameter

2m coil - 35mm width Best use with HUDY 106280 (Body Fix) or something similiar.

Masking Tape - can be refilled with 87033.

Masking Tape

Masking Tape

Masking Tape

Masking Tape

When preparing a polycarbonate body for painting, washing it with detergent to remove any oils and grease from its surface and waiting for it to dry takes time. Polycarbonate Body Cleaner will save you time with this pre-painting cleaning solution. Polycarbonate cleaner can also be used to remove completely dried paint and cleaning scuff marks associated with normal roll...

Masking Tape

Masking Tape

Masking Tape with Plastic sheeting - 0.55x10m

When preparing a polycarbonate body for painting, washing it with detergent to remove any oils and grease from its surface and waiting for it to dry takes time. Polycarbonate Body Cleaner will save you time with this pre-painting cleaning solution. Polycarbonate cleaner can also be used to remove completely dried paint and cleaning scuff marks associated with normal roll...

For fixing and repairing polycarbonate bodies. Signalwort Gefahr Gefahrenhinweise: - H225 Flüssigkeit und Dampf leicht entzündbar. - H304 Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein. - H315 Verursacht Hautreizungen. - H336 Kann Schläfrigkeit und Benommenheit verursachen. - H411 Giftig für Wasserorganismen, mit langfristiger Wirkung. Achtung! Nicht für...

The new Titan body mounting hole reinforcement tape is designed for 1/10 body shell. It is made by high quality 0.2mm PET sheet with strong adhesive. 20 pieces of reinforcement tapes with an inner diameter of 6.5mm and an outer diameter of 30mm.

The new Titan body mounting hole reinforcement tape is designed for 1/8 body shell. It is made by high quality 0.2mm PET sheet with strong adhesive. 20 pieces of reinforcement tapes with an inner diameter of 8mm and an outer diameter of 40mm.

The new Titan body mounting hole reinforcement tape is designed for 1/8 body shell. It is made by high quality 0.2mm PET sheet with strong adhesive. 20 pieces of reinforcement tapes with an inner diameter of 9.5mm and an outer diameter of 30mm.

The rivets are used to combine body and attachments, without glue or screws.

Is glued inside the body to prevent a huge deformation by impacts. Fits 1/8 Onroad and 1:10 touring cars.

The 1/8 class is know for high speeds. At the same time the bodies are also getting thinner by the day to lower the center of gravity as much as possible. This stands in direct conflict, as the thin bodies do not survive very long under high speed action. Usually bodies get stiffened with polycarbonate stripes. The better solution are these carbon stiffener stripes. Very...

1:10 Body Clips

1:10 Body Clips

1:10 Body Clips

1:10 Body Clips

Torpine offers the alu wing shims in different colours, perfect for every design.

Torpine offers the alu wing shims in different colours, perfect for every design.

Torpine offers the alu wing shims in different colours, perfect for every design.

Torpine offers the alu wing shims in different colours, perfect for every design.

Genuine XRAY spares! TAKE CARE: We are using an official XRAY picture in our shop that shows 301349 - the gauge for touring car bodies. The offered FWD version is different. This pictures is just to show how it will be used.

Open body mount holes with ease with this steel tip body reamer with an aluminum handle whilst giving you a good grip and keeping the weight down whilst carrying it around. Open holes up to 14mm big with this reamer!

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance! Besides for touring cars, there is an marked section in the center for marking mini...

Simple yet effective tool for marking wheel wells for easy cutting out, besides wheel wells you can also mark the height of how far it is off the ground. Which is sometimes required sometimes racing on carpet tracks and to avoid your body scraping on the floor and affecting performance!

Body Post Trimmer - Multitool Never have rough looking cut body posts again with this body post cutter! Loosen the knob at the end and make sure the little ball is backed off as well then insert your knife and start tightening the knob! In no time you will have very clean cut body posts on your car! The fun doesn't end there, there's also a bevel cut function which makes...

A very good alternative to HUDY Body Fix (106280) ZAP GOO is the ultimate body fix for all your racing bodies. This specially-formulated glue fixes a damaged or broken body, and may also be applied to a new body to significantly increase the strength, reinforce weak areas, and extend the lifespan of the body. A "must have" for every driver.