Vintage Racing Tire 26mm D-Compound

Tire Additive - very special! - offers a bit less grip than PH47, but is much cheaper - indoor and outdoor use possible - for foam and rubber tires The bottle has an integrated application sponge.

Tire Additive - very special! - all new special developed and tested formula - one additive for all conditions - highest traction possible with lowest chance of traction roll The bottle has an integrated application sponge.

We are proud to show you our new PHUB Hyper Grip for Large Scale Touring Cars to improve grip and tyre life! The Hyper grip comes in a handy 100mL black bottle with a stunning finish for maximum performance. Apply it on the tyres before warming them and improve your lap times and consistency. Apply 5min before warming the tyres for 30min, then you are all set to go! The...

Our well-proven #PHUB additive bottle in its nice black finish which can hold a content of up to 60mL. The bottle comes with a black top and a foam applier to seal the content inside the bottle. EMPTY!

We are proud to show you our very first tyre additive for Slot Car Racing, the PHUB Slot Gripper - Red. The Slot Gripper is made with a specially developed formula for foam and rubber tyres for Slot Car Racing, and is providing better traction and grip as well as freshing up the tyres. The Slot Gripper - Red comes in our well-proven bottle with a foam applier on top. The...

The #PHUB Hybrid Grip is the first additive from PHUB made specially for asphalt tracks. It’s made from a blend of thin/light additives and oily/heavier additives. This unique blend ensures perfect traction and steering, and Will help any driver to go faster! It’s important to notice that by using the Hybrid Grip, the additive works better in higher temperatures. It Will of...

30 Shore Outdoor Asphalt Tires (4 pcs) - Touring Car

Arrowmax Disk Wheel (4 pcs) - Touring Car - WHITE

Colour: orange 12 mm Hex 25mm width Diameter: 49mm inner, 52mm out suitable for 1/10 touring car delivered quantity: 4 rims

Colour: white 12 mm Hex 25mm width Diameter: 49mm inner, 52mm out suitable for 1/10 touring car delivered quantity: 4 rims

Colour: black 12 mm Hex 25mm width Diameter: 49mm inner, 52mm out suitable for 1/10 touring car delivered quantity: 4 rims

Colour: orange 12 mm Hex 25mm width Diameter: 49mm inner, 52mm out suitable for 1/10 touring car delivered quantity: 4 rims

24 Shore Outdoor Asphalt Tires Only (4 pcs) - Touring Car

30 Shore Outdoor Asphalt Tires Only (4 pcs) - Touring Car

40 Shore Outdoor Asphalt Tires Only (4 pcs) - Touring Car

Tire Warmer (1/10) & Batt Warmer with Bag - Black/Golden Latest V2 with silicone cup covers. Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input (XT60 wire included) - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable...

Replacement for 1:10 touring tires (65mm diameter of the cups). 1 pair.

Replacement for 1:8 GT tires (98mm diameter). 1 pair.

Tire Warmer (1/8 GT) & Batt Warmer with Bag - Black/Golden Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable display - Safety timer - Temperature range: 20-80°C,...

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - MAGENTA - front (2 pcs)

Pro-Cut 1/12 foam wheels on HR-38 Flex rims

Pro-Cut 1/12 foam wheels on HR-38 Flex rims

Pro-Cut 1/12 foam wheels on HR-38 Flex rims

Pro-Cut 1/12 foam wheels on HR-38 Flex rims

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - GREEN (soft) - rear (2 pcs)

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - BLUE (medium) - rear (2 pcs)

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - BLUE - front (2 pcs)

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - DOUBLE BLUE - front (2 pcs)

Pro-Cut 1/12 foam wheels on HR-38 Flex rims - ORANGE - rear (2 pcs)

Easy to recognize with the blue belt.

Easy to recognize with the blue belt.

The new #2314 mounted tires are now available. Take them out of the bag and go have fun. High performance RT-1 tires that have proven themselves in the World GT-R category of racing. Same high performance, belted tire with great grip and durability. The RT-1 tire has ZERO degradation, as fast on run 20 as race 1. The RT-1 has super long wear, providing multiple SEASON of use...

The new #2320 mounted tires are now available. Take them out of the bag and go have fun. High performance RT-1 tires that have proven themselves in the World GT-R category of racing. Same high performance, belted tire with great grip and durability. The RT-1 tire has ZERO degradation, as fast on run 20 as race 1. The RT-1 has super long wear, providing multiple SEASON of use...

Fits 12th & 10th pan car tires - front & rear, and also fits TC with the included adapter. *UPDATE* - The new True-All adapter has been updated for a better fit on more brands of wheels! The thread-on clamp piece is now double ended with a different taper pitch and different o.d. on each end to ensure that the arbor will clamp your tires tightly, for a no wobble finish....

Finally, a tire truer cutting bit that leaves a perfect finish on the tire. The Final Cut tire truing bit is a super hard tungsten carbide cutting bit with sharp, super hard teeth. The Final Cut remains sharp cut after cut. The finish on the foam after truing is absolutely smooth and ready to race. Because it cuts so cleanly and aggressively, the Final Cut truing bit reduces...

Finally, no more having to use the wife's nail files or a machinists metal file! The new CRC Tire Paddle gets the job done right, and with ease. The tire paddle has a coarse 65 grit on one end to round the edges on even the toughest rubber, such as purple front tires. Then flip it around and get the perfect finish with the 130 grit end. With all these new tire truing...

Cutting Tool included. For 8mm adapter / with 8mm motor shaft. Made for large tires starting from 55.5mm diameter up to 105mm. Especially for 1:8 GT! No wheel adapter for 1:8 GT included! Please purchase seperatly! TAKE CARE: Sometimes the included cutting tool holder shows the wrong scale. You need to measure the tire diameter by yourself. It's not a bug - it's a feature.

Suitable for 1:8 GT tires with 17mm hex hub. Please take care: You should check the maximum diameter of your tire truer before ordering this adapter. 1:8 GT is really big - there are not many tire truers which will be able to handle it.

CG Competition Grip 2 Tire Additive New 2023 version with sponge bottle.

Tire Additive Please take care: CS tire additives may leaking during the transport. At the moment (beginnig of 2016) there is a problem with the sealing of the bottles.

Tire Additive

Tire Additive

Perfect fit for Tamiya 2WD Buggies like Fighter Buggy and Neo Fighter. DT-01, DT-02 and DT-03 - perfect fit! It's not a high competition tire set. It's a cheap - but still good - solution to go through the dirt. It's made for dirt and street at the same time. Scale: 1/10 Diameter: 82mm Tire width front: 22mm Tire width frear: 37mm Hub front: 11mm bearing Hub rear: 12mm hex

Perfect fit for Tamiya 2WD Buggies like Fighter Buggy and Neo Fighter. DT-01, DT-02 and DT-03 - perfect fit! It's not a high competition tire set. It's a cheap - but still good - solution to go through the dirt. It's made for dirt and street at the same time. Scale: 1/10 Diameter: 82mm Tire width front: 22mm Tire width frear: 37mm Hub front: 11mm bearing Hub rear: 12mm hex

Front tires: 44mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: T 32 / 35 Shore: special carpet foam for indoor use A 32: standard foam for indoor and outdoor use Rear: T 32 / 35 Shore: special carpet foam for indoor use Will be sold as a set of two tires. Glued on black star rims. You...

Front tires: 44mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: T 32 / 35 Shore: special carpet foam for indoor use A 32: standard foam for indoor and outdoor use Rear: T 32 / 35 Shore: special carpet foam for indoor use Will be sold as a set of two tires. Glued on black star rims. You...

Front tires: 44mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: T 32 / 35 Shore: special carpet foam for indoor use A 32: standard foam for indoor and outdoor use Rear: T 32 / 35 Shore: special carpet foam for indoor use Will be sold as a set of two tires. Glued on black star rims. You...

Front tires: 44mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: T 32 / 35 Shore: special carpet foam for indoor use A 32: standard foam for indoor and outdoor use Rear: T 32 / 35 Shore: special carpet foam for indoor use Will be sold as a set of two tires. Glued on black star rims. You...

Front tires: 44mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: T 32 / 35 Shore: special carpet foam for indoor use A 32: standard foam for indoor and outdoor use Rear: T 32 / 35 Shore: special carpet foam for indoor use Will be sold as a set of two tires. Glued on black star rims. You...

Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/8 Onroad means cars likes XRAY RX8. Does not fit for 1:8 GT cars like XRAY GTX8! Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/10 Onroad means cars likes XRAY X10. It does not fit for touring cars with hex hub. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/10 Formula means cars likes XRAY X1. It does not fit for older formula cars which are using a hub like a Pro10 pancar. Made for either 8mm or 10mm outer diameter front bearings. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo...

Cutting Tool included. For 8mm adapter / with 8mm motor shaft. No wheel adapter included! Please purchase seperatly!

Cool upgrade for the CONTACT tire grinding machine J017! We already like the J017 machine a lot because it offers very good value for money. For us, it is currently (2025) still the most attractively priced way to get a good and recommendable tire grinding machine. Contact is now offering an additional upgrade for the machine. The upgrade consists of a bowl that goes under...

Take care: 1/12 Onroad means cars likes XRAY X12. It does not fit for special cars like Schumacher Super Stox. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Suitable for 1/8 GT - and also 1/8 buggy if you want to try it onroad! Diamter: 103mm Width: 42mm Hub: 17mm hex Take care: Some of the wheels does include stickers, some not. They are not shown on the pictures and not mentioned in the description.

Suitable for 1/8 GT - and also 1/8 buggy if you want to try it onroad! Diameter: 103mm Width: 42mm Hub: 17mm hex Take care: Some of the wheels does include stickers, some not. They are not shown on the pictures and not mentioned in the description.