This rubber band will help you to glue offroad tires. Available in two different sizes: 105250 - SMALL => for 1:10 2WD / 4WD Buggy 105251 -LARGE => for 1:10 Shortcourse / Truck and 1:8 Buggy

- universal tire balancing station for all wheels - redesigned lightweight version - identifies the smallest inaccuracies of tire balance - identifies improperly glued rubber tires - identifies differences in inserts - precision-balanced tires improve car traction & stability - optional wheel adapters 1/10, 1/8, 1/6 & 1/5 wheels - smart clamping system prevents binding of...

WHEEL ADAPTER FOR 1/5 ON-ROAD + 1/6 BUGGY

WHEEL ADAPTER FOR 1/8 OFF-ROAD CARS, TRUGGY & RALLY GAME

WHEEL ADAPTER FOR 1/10 TOURING CARS

Wheel Adapter for 1/10 Off Road Car - 14mm

Use it when balancing your tires - just stick it on the inside of the rim.

TIRE ADDITIVE - CARPET GRIPPER - 50ml NEW version 2016 with new bottle and new applicator!

Excellent tire additive for both asphalt and carpet tracks. The Red additive was specially developed and mixed for low and very-low traction conditions. Using the Red additive the tires generate higher traction. The additive was developed and tested by top on-road drivers to achieve maximum traction while keeping the car stable and easy to drive. Developed for rubber tires.

Rubber & foam tires: Apply the additive 15-25 minutes before your run and leave on tires. Wipe off with a towel before you start.

Rubber & foam tires: Apply the additive 15-25 minutes before your run and leave on tires. Wipe off with a towel before you start.

RUBBER TRANSMISSION BELT 25x2.5 (3)

Suitable for setup wheels 108070

Suitable for setup wheels 109672

24 mm Wheels Starburst - Yellow (4 pieces)

1/10 Touring Car Tires with Sponge (4 pcs.) 12mm hex 63mm diameter 24mm width

HUDY A3-28, Indoor Carpet Tires - preglued on HUDY rims. XRS legal! Width: 24mm Diameter: 63mm Hub: 12mm Hex Set of four pieces, preglued with inserts and rims.

Width: 24mm Diameter: 66.5mm // this is bigger than usual and will help for ground clearance in the rain Hub: 12mm hex Scale: 1/10 Will be delivered as a set of four tires, with rims and inserts - NOT glued.

HUDY A1-36, Outdoor Asphalt Tires - preglued on HUDY rims. XRS legal! Width: 24mm Diameter: 63mm Hub: 12mm Hex Set of four pieces, preglued with inserts and rims.

HUDY offers now his "own" tires! Same tires like RIDE 26040 / 26042 - a good way if RIDE is out of stock again.

HUDY offers now his "own" tires. Suitable for F1 cars like XRAY X1. 10mm bearing hub in the front - 12mm hex hub in the rear. Take care: Those tires are NOT glued. You need to glue them before you want to use them.

Suitable for cars like XRAY X1 - with 10mm bearing hub.

Suitable for cars with 14mm hex hub - like XRAY X1.

Suitable for 1/8 buggy cars like XRAY XB8 - with 17mm hex hub. 113mm diameter - 44mm width

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

Front tires: 63mm diameter 28mm width for bearings Rear tires: 63mm diameter 50mm width standard hub with 4 screws Will be sold as a set of two tires. Glued on grey star rims.

63mm diamter 24mm width 12mm hex hub Will be sold as a set of four tires. Glued on white dish rims.

63mm diamter 24mm width 12mm hex hub Will be sold as a set of four tires. Glued on white dish rims.

63mm diamter 24mm width 12mm hex hub Will be sold as a set of four tires. Glued on white dish rims.

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Front tires: 45mm diameter 26mm width for bearings Rear tires: 46mm diameter 38mm width standard hub with 3 screws Which compound should I choose? Front: 30, 32, 35, 37 Shore: standard foam for indoor and outdoor use Hagberg: special foam which works on nearly any carpet just perfect Hagberg Red Dot: special foam, made for ETS carpet Rear: 30, 32, 35 Shore: standard foam for...

Suitable for F1 cars like XRAY X1. 10mm bearing hub in the front - 12mm hex hub in the rear.

Tyre Rubber Sander Features: Rubber tire sander for touring class Powerful high torque DC motor with dual metal bearings Light-weight aluminum case Quiet operation Technical Data: Dimension (LXWXH): 138 x 73 x 70mm Input Voltage: DC 6V-12V Minimum Input Current: 10A Case Material: Aluminum Power Supply Cable: Silicon Cable with XT60 Plug + 4mm Adapter

Made for 1:10 Nitro Onroad cars like XRAY NT1. Take care: They are NOT made for 1:10 EP touring cars. They may fit - but it might also be difficult cause of the wide. Take care: Those tires are "handmade". Especially the glueing is very fragile. Please don't use them in dry conditions as they will wear within seconds. We recommend to use them only in really WET conditions.

Made for 1:8 Onroad cars like XRAY RX8, Serpent 990 or BURI Racer. Take care: They are NOT made for 1:8 GT cars like XRAY GTX8. Take care: Those tires are "handmade". Especially the glueing is very fragile. Please don't use them in dry conditions as they will wear within seconds. We recommend to use them only in really WET conditions.

Width: approx. 29mm Inner diameter: approx. 44mm Outer diameter: approx. 64mm Mixture: L (allrounder - for asphalt and carpet) Hardness: 35 Shore

Width: approx. 29mm Inner diameter: approx. 44mm Outer diameter: approx. 64mm Mixture: C (special for carpet) Hardness: 35 Shore

Width: approx. 29mm Inner diameter: approx. 44mm Outer diameter: approx. 62mm Mixture: HI (special for asphalt with less rear grip) Hardness: 35 Shore

Width: approx. 43mm Inner diameter: approx. 45mm Outer diameter: approx. 64mm Mixture: L (allrounder - for asphalt and carpet) Hardness: 25 Shore

Width: approx. 43mm Inner diameter: approx. 45mm Outer diameter: approx. 64mm Mixture: P (allrounder - for asphalt and carpet) Hardness: 30 Shore

VTEC 1/10 Short Course Tyre + Inserts (2pcs) - S10 Blast SC The VTEC tyre for 1/10 Short Course races. Prescribed for the LRP-Offroad-Challenge! The VTEC Short Course tyre was specifically tailored for the booming Short Course scene and complements the high quality and competition proven VTEC tyres. The fine pin profile and soft compound offer perfect grip on almost every...

Top Grip Carpet 2, adhesive UPDATE 2017: The bottle got a new sticker. Now it's also written on the sticker that you may use it for Asphalt, too. It works great on Carpet AND Asphalt. The tire traction fluid is still the same - just the design of the sticker has changed. This easy-to-apply fluid with neutral odor provides maximum grip for all types of tires on carpet Perfect...

Top Grip Carpet 3 Tire Traction - 75ml bottle with sponge

Top Grip Asphalt, adhesive This easy-to-apply fluid with neutral odor provides maximum grip for all types of tires on asphalt Perfect interaction of all components and use of professional materials are the keys to success in racing. Any successful R/C pilot will tell you this. To meet these requirements, the LRP Factory Team is continuously developing new high-quality tools...

VTEC G34HT - TC Preglued Wheel Set - Asphalt (4pcs) 24mm width - 12mm hex

VTEC Kamikaze 10 4WD front - 1/10 Buggy 4WD tyre front incl. insert J-Compound The VTEC Kamikaze for your 1/10 offroad model. VTEC Kamikaze – the popular VTEC 1/8 offroad tyre is now also available for your 1/10 scale offroad model! The J-Compound is ideally suited for beginners and hobby drivers. The endurance tyre with best grip in every corner - optimised tread design for...