Tire Warmer (1/10) & Batt Warmer with Bag - Black/Golden Latest V2 with silicone cup covers. Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input (XT60 wire included) - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable...

Replacement for 1:10 touring tires (65mm diameter of the cups). 1 pair.

Replacement for 1:8 GT tires (98mm diameter). 1 pair.

Tire Warmer (1/8 GT) & Batt Warmer with Bag - Black/Golden Features: - Usable with Dual Power Source: 4S LiPo battery pack / 12-18V DC input - Front & Rear temperature can be set independently - Temperature of 4 tires is controlled by MCU - 8 different beep tones - Minimum temperature - Celsius - Fahrenheit selectable display - Safety timer - Temperature range: 20-80°C,...

Fits 12th & 10th pan car tires - front & rear, and also fits TC with the included adapter. *UPDATE* - The new True-All adapter has been updated for a better fit on more brands of wheels! The thread-on clamp piece is now double ended with a different taper pitch and different o.d. on each end to ensure that the arbor will clamp your tires tightly, for a no wobble finish....

Finally, a tire truer cutting bit that leaves a perfect finish on the tire. The Final Cut tire truing bit is a super hard tungsten carbide cutting bit with sharp, super hard teeth. The Final Cut remains sharp cut after cut. The finish on the foam after truing is absolutely smooth and ready to race. Because it cuts so cleanly and aggressively, the Final Cut truing bit reduces...

Finally, no more having to use the wife's nail files or a machinists metal file! The new CRC Tire Paddle gets the job done right, and with ease. The tire paddle has a coarse 65 grit on one end to round the edges on even the toughest rubber, such as purple front tires. Then flip it around and get the perfect finish with the 130 grit end. With all these new tire truing...

Cutting Tool included. For 8mm adapter / with 8mm motor shaft. Made for large tires starting from 55.5mm diameter up to 105mm. Especially for 1:8 GT! No wheel adapter for 1:8 GT included! Please purchase seperatly! TAKE CARE: Sometimes the included cutting tool holder shows the wrong scale. You need to measure the tire diameter by yourself. It's not a bug - it's a feature.

Suitable for 1:8 GT tires with 17mm hex hub. Please take care: You should check the maximum diameter of your tire truer before ordering this adapter. 1:8 GT is really big - there are not many tire truers which will be able to handle it.

Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/8 Onroad means cars likes XRAY RX8. Does not fit for 1:8 GT cars like XRAY GTX8! Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/10 Onroad means cars likes XRAY X10. It does not fit for touring cars with hex hub. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Take care: 1/10 Formula means cars likes XRAY X1. It does not fit for older formula cars which are using a hub like a Pro10 pancar. Made for either 8mm or 10mm outer diameter front bearings. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo...

Cutting Tool included. For 8mm adapter / with 8mm motor shaft. No wheel adapter included! Please purchase seperatly!

Cool upgrade for the CONTACT tire grinding machine J017! We already like the J017 machine a lot because it offers very good value for money. For us, it is currently (2025) still the most attractively priced way to get a good and recommendable tire grinding machine. Contact is now offering an additional upgrade for the machine. The upgrade consists of a bowl that goes under...

Take care: 1/12 Onroad means cars likes XRAY X12. It does not fit for special cars like Schumacher Super Stox. Suitable for any popular tire truer like HUDY, Fastrax, HARD, Yokomo... For 8mm shaft diameter.

Universal type tire sander arbor set that can be used on multiple style of arbor or sander systems including even electric drills. The machined alloy 7075 arbor will fasten various 1/10th style wheels from off road or on-road vehicles. The arbor works with; 12mm hex wheels- 1/10 Touring car, Street Eliminators, Off Road buggies etc. 14mm hex wheels- 1/10 rear F1 tires 10mm...

Replacement vinyl side wall stickers for Exotek F1 tires or similar sizes. Includes 4 stickers made of heavy duty vinyl with vibrant colors for easier car visibility. Dimensions- 40mm ID x 50.5mm OD Instructions- clean tires thoroughly with alcohol rub or similar and then apply sticker. Use quick heat to set the sticker then rub to firmly attach it to the tire.

Replacement vinyl side wall stickers for Exotek F1 tires or similar sizes. Includes 4 stickers made of heavy duty vinyl with vibrant colors for easier car visibility. Dimensions- 40mm ID x 50.5mm OD Instructions- clean tires thoroughly with alcohol rub or similar and then apply sticker. Use quick heat to set the sticker then rub to firmly attach it to the tire.

Hand held tire and wheel balancing tool set designed to easily balance your tires for optimal handling. Works with many types of cars and trucks that have 12mm hexes (off road and on road), 14mm hexes (1/10 F1) and 10mm bearing front wheels (remove the bearings from the wheel). The faster your car or truck goes the more you will experience tire hop and strange traction...

Cutting Tool included. No wheel adapter included! Please purchase seperatly!

Wheel Adapter Tire Truer for 1:10 Touring - 12mm Hex

Cutting Tool included. For 8mm adapter / with 8mm motor shaft. No wheel adapter included! Please purchase seperatly!

Titan Cutting Tool for tire truer (e.g. HUDY) As good as the (discontinued) HUDY 102067!

The rubber band is pulled over the tire and presses the tire onto the rim with even pressure. This is particularly important for off-road tires - as it avoids a gap between the tire and the rim. Perfect for 1:10 off-road tires. These tires typically have a diameter of around 85mm. Because the rubber is stretchable, this diameter can vary both upwards and downwards. Using it...

Wheel Adapter for HARD 1040 Tire Truer

Tyre Heater Belt for 1:8 GT / Rallygame (2 pairs) Length: 310mm Width: 60mm TWO pair of belts + control unit.

Tyre Heater Belt for 1:8 GT / Rallygame (2 pairs) Length: 440mm Width: 60mm TWO pair of belts + control unit.

Main features: The world's best selling automatic tire truer is now better than ever! We have incorporated a new tire width cutting adjustment, so you can now very quickly and easily adjust the width of the cutting area on the tire. The new cutting adjustment is controlled by an easy-to-use operating wheel. New features: - tire width cutting adjustment - new transparent blue...

Grinding Tool Mount with Vernier 40-80R

Cutting Tool For Tires

THREE-CIRCUIT SWITCH Suitable for Tire Truer 102003

Suitable for Micro Truer 103100 or 103200 Also for the old non-automatic tire truers and startboxes (104400 / 104500).

WHEEL ADAPTER 1/10 ON-ROAD - SERPENT, PICCO, MUGEN

WHEEL ADAPTER 1/10 - ALL TOURING CARS

WHEEL ADAPTER 1/10 - ALL TOURING CARS

WHEEL ADAPTER 1/8 ON-ROAD CARS

Suitable as spare part for 102362 only.

WHEEL ADAPTER 1/12 & 1/10 PAN CARS Take care: You will get the latest version which includes a black lock nut. Some pictures in the gallery may show the older version - this is just to demonstrate how to use.

WHEEL ADAPTER 1/10 F1 Cars Suitable for 14mm Hex (rear) and also 8mm and 10mm bearings (front, outer diamter of the bearing).

WHEEL ADAPTER 1/10 F1 Cars Suitable for 14mm Hex (rear) and also 8mm and 10mm bearings (front, outer diamter of the bearing).

Made for a more precision centering of the wheels when using the HUDY tool 102375. Will replace the standard locknut.

WHEEL ADAPTER 1/18 - XRAY M18T, M18MT

CASE FRS 977 FOR ADAPTER

ABRASIVE DISK - SET

ABRASIVE DISK - SET - Coarse Grain

SLOT CAR WHEEL AXLE 3.0 MM - 3/32"

SLOT CAR WHEEL AXLE 3.0 MM - 1/8"

SLOT CAR WHEEL AXLE 2.0 MM

SLICING NEEDLE

HUDY 103075 - Plastic Box for 103100 / 103200 tire truer

This is the best selling tire truer in the slot car market. The tire truer has received many awards from slot car magazines around the world and all the professional slot drivers keep this palm sized tire truer in their pitboxes. - black hard-anodized surface with Hudy traditionally high quality and stylish looks - adjustable grinding of tire diameter and angle - adjustable...

HUDY MICRO TIRE TRUER FOR 1/18 + 1/24 Will be delivered without adapter. Adapter for M18, M18 Pro or Mini-Z will be available seperatly.

ADAPTER FOR 1/18 XRAY M18 & HPI MICRO

ADAPTER FOR 1/18 XRAY M18 PRO

ADAPTER FOR 1/24 KYOSHO MINI-Z

Easy snap-on concept allows to insert or remove the tires easily. Makes storing and sorting easy!

This rubber band will help you to glue offroad tires. Available in two different sizes: 105250 - SMALL => for 1:10 2WD / 4WD Buggy 105251 -LARGE => for 1:10 Shortcourse / Truck and 1:8 Buggy

This rubber band will help you to glue offroad tires. Available in two different sizes: 105250 - SMALL => for 1:10 2WD / 4WD Buggy 105251 -LARGE => for 1:10 Shortcourse / Truck and 1:8 Buggy