Specifications: - Nominal Voltage: 7.4V - Capacity: 6390mAh - Cell configuration: 2S - Length: 138.5mm - Width: 46.5mm - Height: 23.0mm - Weight: 290g - Plugs: 5mm (Plugs open on both sides) - Discharge-Rate: 135C NEVER keep your LiPo completely charged or uncharged! Both of these charging states damage the LiPo irreversible and lead to bloating the cells. A completely...

Specifications: - Nominal Voltage: 7.4V - Capacity: 8590mAh - Cell configuration: 2S - Length: 138.5mm - Width: 46.5mm - Height: 25.0mm - Weight: 320g - Plugs: 5mm (Plugs open on both sides) - Discharge-Rate: 135C NEVER keep your LiPo completely charged or uncharged! Both of these charging states damage the LiPo irreversible and lead to bloating the cells. A completely...

Specifications: - Nominal Voltage: 7.4V - Capacity: 4290mAh - Cell configuration: 2S - Length: 92.8mm - Width: 46.5mm - Height: 18.5mm - Weight: 162g - Plugs: 5mm (Plugs closed on bottom side) - Discharge-Rate: 135C NEVER keep your LiPo completely charged or uncharged! Both of these charging states damage the LiPo irreversible and lead to bloating the cells. A completely...

Specifications: - Nominal Voltage: 7.4V - Capacity: 5490mAh - Cell configuration: 2S - Length: 95.7mm - Width: 46.5mm - Height: 25.0mm - Weight: 214g - Plugs: 5mm (Plugs open on both sides) - Discharge-Rate: 135C NEVER keep your LiPo completely charged or uncharged! Both of these charging states damage the LiPo irreversible and lead to bloating the cells. A completely...

A high-performance microprocessor, specialized operating software, and many advanced features make it the perfect charging solution for new hobbyists, casual enthusiasts, or hardcore racers. Simultaneous charging of two batteries at up to 14A is possible thanks to a powerful integrated power supply. Storage of up to 10 different charge profiles (per channel) allows for easy...

When using the 1S TX Charge Lead Adapter in conjunction with a TX charge lead (fe RE27235) you can charge a 1S TX battery with the Reedy 1416-C2L charger in 1S balance mode.

29g - 136x46x0.6mm 39g - 136x46x0.8mm ​48g - 136x46x1.0mm

This coupler creates a clean connection between two 2S batteries to create a high-capacity 4S battery for applications that need extended run times. Designed for use with Reedy Zappers RE27358 or RE27359.

Nominal voltage: 7.6V C-rate: 130C Style: ULP Stick Hardcase Connector: 5mm tubes Application: 1:10 Size: 139x47x19.5mm Weight: ca. 245g Max. Charge Rate: 12.0A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged...

Nominal voltage: 7.6V C-rate: 90C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x25.1mm Weight: ca. 225g Max. Charge Rate: 12.8A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 15.2V C-rate: 90C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:8 Size: 99x47x48.2mm Weight: ca. 445g Max. Charge Rate: 12.6A Content: 1x battery, 1 pair of 5mm plugs, 1x wire XH-4S, 1x adapter 5mm to T-Plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo...

Grip Bullet Connectors feature an elevated grooved top to aid in removal of the plug from the corresponding socket.

Grip Bullet Connectors feature an elevated grooved top to aid in removal of the plug from the corresponding socket.

Nominal voltage: 7.6V C-rate: 90C Style: LP Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x20mm Weight: ca. 165g Max. Charge Rate: 9.6A Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect...

Nominal voltage: 7.6V C-rate: 135C Style: Stick Hardcase Connector: 5mm tubes Application: 1:10 Size: 139x47x25.1mm Weight: ca. 320g Max. Charge Rate: 16.4A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 7.6V C-rate: 135C Style: Stick Hardcase Connector: 5mm tubes Application: 1:10 Size: 139x47x19.5mm Weight: ca. 247g Max. Charge Rate: 12.0A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 7.6V C-rate: 95C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x25.1mm Weight: ca. 227g Max. Charge Rate: 12.8A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and...

Nominal voltage: 7.6V C-rate: 95C Style: Shorty Hardcase Connector: 5mm tubes Application: 1:10 Size: 96x47x20mm Weight: ca. 167g Max. Charge Rate: 9.6A Content: 1x battery, 1 pair of 5mm plugs, 1x 2mm balancer plug Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the...

Suitable for charging 1S or 2S batteries. Stepped bullet connectors are compatible with batteries that use 4mm or 5mm sockets. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional protection and a professional appearance while positive ends are clearly marked to prevent...

Suitable for charging 4S batteries. Compatible with batteries that use 5mm sockets. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional protection and a professional appearance while positive ends are clearly marked to prevent reverse polarity.

The ideal solution for charging receiver batteries through the balance lead instead of unplugging the battery to charge. An extra-long length of 80cm offers added convenience for nitro racers. Works with TX batteries too. Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during high-current cycling. Mesh sheathing offers additional...

If your stable includes a variety of vehicles that use differing cell counts, these leads are for you. After selecting the correct cell-count setting, simply connect the main plug and then plug the battery's balance lead into the appropriate balance connector to charge. Length = 50cm Heavy-duty 12-gauge silicone wires provide maximum current flow without overheating during...

3000mAh NiMH Battery 220V charger 8x 1.5V batteries for transmitter

Robitronic EP3600 - Sub C single cell - 1.2V 3600mAh - NiMH

With these Adapter wire you can easily convert your EH Plug into a XH one. Adapter from: 4S (4 Cell) JST-EH Plug to 4S (4 Cell) JST-XH Plug.

Measurements ca. 56,3x31x31,7mm Weight: ca. 100g Plugs: JR-Style / JST-XH Balancer Fits: Kyosho, Tekno RC

Measurements ca. 87,1x16,9x29,8mm Weight: ca. 84g Plugs: JR-Style / JST-XH Balancer Fits: Team Associated RC8B3, Mugen MBX8, XRAY XB8, Sworks S35-3

Measurements ca. 54,6x21,3x38,8mm Weight: ca. 89g Plugs: JR-Style / JST-XH Balancer Fits: HB, TLR

4S Battery Hook & Loop Strap (2 pieces) Lenght Strap: ~270mm (Length Loop: ~185mm; Length Hook: ~90mm) Width Strap: ~20mm

RX/TX Charging Lead for SANWA/Futaba with JST/BEC Adaptor

2S TX/RX Charging Adaptor (XH/5mm)

RX Extension Black with JR Plug - 50mm

RX Extension Black with JR Plug - 100mm

RX Extension Black with JR Plug - 150mm

RX Extension Black with JR Plug - 200mm

2S Charging Lead - 4/5mm + 2mm / 4mm + 3PIN-XH - 60cm

2S Charging Lead - 4/5mm + 2mm / 4mm + 3PIN-XH - 30cm

2S Charging Lead - 4/5mm + 2mm / 4mm + 3PIN-EH - 60cm

2S Charging Lead - 4/5mm + 2mm / 4mm + 3PIN-EH - 30cm

2S Charging Lead - 4/5mm + 2mm / 4mm + 7PIN-PQ - 60cm

2S Charging Lead - 4/5mm + 2mm / 4mm + 7PIN-PQ - 30cm

4S Charging Lead - 4/5mm + 4S-XHmm / 4mm + 5PIN-XH - 40cm

4S Charging Lead - 4/5mm + 4S-XHmm / 4mm + 5PIN-EH - 40cm

4S Charging Lead - 4/5mm + 4S-XHmm / 4mm + 7PIN-PQ - 40cm

2S Charging Lead 60cm (4/5mm, 2mm) (7PIN-XH, XT60)

2S Charging Lead 30cm (4/5mm, 2mm) (7PIN-XH, XT60)

4S Charging Lead 40cm (4/5mm, 4S-XH) (7PIN-XH, XT60)

Saddle Pack Connecting Wire 10cm Made with 4mm plugs, including a 2mm bushing as sensor port - for 2S saddle pack configuration (like 1:10 Offroad)

5mm Gold Cooling Head Bullet Plugs (2 pieces) Take care: Those plugs are really tight fight. The shaft diameter is 4.99-5.01mm. Regular plugs does have around 4.90mm. Please don't buy if you plugs are smaller than 4.99mm and already tight fit!

5mm Gold Cooling Head Bullet Plugs (10 pieces) Take care: Those plugs are really tight fight. The shaft diameter is 4.99-5.01mm. Regular plugs does have around 4.90mm. Please don't buy if you plugs are smaller than 4.99mm and already tight fit!

EC5 Connector female (2 pieces)

Mini Adapter Tamiya to T-Plug

Mini Adapter Tamiya to XT60-Plug

Mini Adapter Tamiya to EC3-Plug

Mini Adapter Tamiya to TRX-Plug

Mini Adapter EC3 to T-Plug

Mini Adapter EC3 to XT60

Mini Adapter EC3 to Tamiya

Mini Adapter EC3 to TRX

The RC215 500W Dual Channel LiPo Battery DC Charger is a compact and powerful device that allows to charge up to two battery packs simultaneously with up to 15A of charge current. When used in the combined ASYNC mode, a maximum of 25A of charge current is possible. The DC charger can be used with 1S to 6S LiHV/LiPo, 1 to 16 cell NiMH or 1S to 10S batteries and it works with...