Abmessungen: 86x29x17mm - optimal z.B. für die SANWA M12, MT-4 oder MT-S passend. Gewicht: 90g Bitte nicht als Antriebsakku benutzen. Nur als Empfänger oder Senderakku! Hinweis: Sollten sich die Akkus nach der Entladung aufblähen oder dick werden, so ist dies ein Zeichen für eine Überlastung und/oder Tiefentladung des Akkus. Der Akku wird hierdurch geschädigt und die max....

Use two of it for the Serpent S240 Dimensions: 55x25x11mm Weight: 28g

Dimensions: 77x27x16mm Weight: 64g

Softcase LiPo Battery - for Tamiya Dancing Rider - 3200mAh 2S 7.4V - T-Plug Measure at 57mm x 31mm x 31mm Measure at 57mm x 31mm x 31mm Measure at 57mm x 31mm x 31mm

Nominal voltage: 11.1V Style: for 3PK Connector: JR Balancing connector: XH Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 92x51x13mm Weight: 134g

Nominal voltage: 3.7V Style: for SANWA M17 Connector: JR Balancing connector: not necessary Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 75x46x12mm Weight: 94g

Nominal voltage: 7.4V Style: Softcase Straight Connector: JR Balancing connector: XH Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 84x30x17.5mm Weight: 87g

Nominal voltage: 7.4V Style: Softcase Hump Connector: JR Balancing connector: XH Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 52x32x32mm Weight: 98,13g

Nominal voltage: 7.4V Style: for SANWA M12 / MT-4 Connector: JR Balancing connector: XH Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 95x29x18mm Weight: 102g

Nominal voltage: 11.1V Style: for JR / KO (TAKE CARE! Will be delivered for JR - if you want to use it in a KO you need to switch the polarity of the plug!) Connector: JR Balancing connector: XH Application: Receiver / Transmitter Pack ONLY. Not to be used for powering your motor! Size: 95x29x26mm Weight: 150g Take note: Does NOT fit KoPropo EX-NEXT!

VTEC LiFePo 1700 RX-Pack 2/3A Straight - RX-only - 6.6V Hint: If the LiPo bloats or becomes thicker after unloading, it’s a sign for capacity overload or deep discharge. Because of that, the Lipo gets damaged and the maximum capacity diminishes. Bloated LiPos are NO defect product and consequently out of warranty. NEVER keep your LiPo completely charged or uncharged! Both of...

VTEC LiPo 2200 RX-Pack small Hump - RX-only - 7.4V The LiPo receiver batteries feature highest power and an unbelievable performance. With their standard dimensions, the VTEC LiPo RX-Packs are suitable for all R/C models available on the market. 2/3A Straight and Hump types with robust cell guard Ready-to-use with pre-assembled connectors Suitable as receiver battery for...

The LiPo receiver batteries feature highest power and an unbelievable performance. With their standard dimensions, the VTEC LiPo RX-Packs are suitable for all R/C models available on the market. 2/3A Straight and Hump types with robust cell guard Ready-to-use with pre-assembled connectors Suitable as receiver battery for 1/10 and 1/8 models All cells are separately tested...

VTEC LiPo 3000 TX-Pack Sanwa M12/MT-4/Exzes-X/SD-10G - TX-only - 7.4V The LiPo transmitter batteries feature highest power and an unbelievable performance. With their tailor-made dimensions, the VTEC LiPo TX-Packs are suitable for Sanwa and Futaba transmitters. The TX-Pack 3000 is suited for the Sanwa M12, MT-4, Exzes-X and SD-10G transmitters. Ready-to-use with...

Perfect fit for your SANWA MT-44! 3.7V - 3200mAh - 61x46x8.5mm size - ONLY for transmitter use!

Perfect fit for your SANWA MT-44! 3.7V - 3200mAh - 61x46x8.5mm size - ONLY for transmitter use!

These NOSRAM receiver packs are a fantastic choice for hobby drivers, club and competition racers. Their main features are high capacity and x-tremely long runtime. The robust cells are intensively tested and carefully selected – just NOSRAM quality approved. 50x30x32mm 116g

These NOSRAM receiver packs are a fantastic choice for hobby drivers, club and competition racers. Their main features are high capacity and x-tremely long runtime. The robust cells are intensively tested and carefully selected – just NOSRAM quality approved. 50x30x32mm 116g

Measurements ca. 56,3x31x31,7mm Weight: ca. 100g Plugs: JR-Style / JST-XH Balancer Fits: Kyosho, Tekno RC

Measurements ca. 87,1x16,9x29,8mm Weight: ca. 84g Plugs: JR-Style / JST-XH Balancer Fits: Team Associated RC8B3, Mugen MBX8, XRAY XB8, Sworks S35-3

Measurements ca. 54,6x21,3x38,8mm Weight: ca. 89g Plugs: JR-Style / JST-XH Balancer Fits: HB, TLR

The 1S battery can be charged with standard LiPo chargers. With a capacity of 5200 mAh, the battery caters for the requirements of Sanwa's power hungry top-of-the-line radio and will last throughout a long day of racing. Dimensions: 87x43.5x12.5mm Weight: 99g Voltage: 3.7V / 1S Capacity: 5200mAh Plug: JR

The 1S battery can be charged with standard LiPo chargers. With a capacity of 3200 mAh, the battery will last throughout a long day of racing while keeping your transmitter light. Dimensions: 61x43.5x11mm Weight: 59g Voltage: 3.7V / 1S Capacity: 3200mAh Plug: JR

Features: - Capacity: 1800mAh - Nominal voltage: 7.6V - Length: ca. 89mm - Width: ca. 29mm - Height: ca. 12mm - Weight: ca. 62,3g - Plug: JR - Balancer: XH Plug Charging and storage instructions: Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries...

Replacement battery for SANWA M17.

This is a transmitter only, rechargeable LiPo battery pack that fits some Futaba transmitters and also other radio brands. Fits Futaba Transmitters: T4PM T4PLS T4GRS T4PV T4PX T6K T7PX T7XC (tight fit) T8J T10J T10PX T12K T14SG T16SZ T18SZ FX20 FX36 Make sure the transmitter battery settings are for 2S LiPo with alarm cut-off set to 6.4 volt. Specs: Type: LiPo Transmitter...