Saddle Pack Connecting Wire 10cm Made with 4mm plugs, including a 2mm bushing as sensor port - for 2S saddle pack configuration (like 1:10 Offroad)

5mm Gold Cooling Head Bullet Plugs (2 pieces) Take care: Those plugs are really tight fight. The shaft diameter is 4.99-5.01mm. Regular plugs does have around 4.90mm. Please don't buy if you plugs are smaller than 4.99mm and already tight fit!

5mm Gold Cooling Head Bullet Plugs (10 pieces) Take care: Those plugs are really tight fight. The shaft diameter is 4.99-5.01mm. Regular plugs does have around 4.90mm. Please don't buy if you plugs are smaller than 4.99mm and already tight fit!

EC5 Connector female (2 pieces)

Mini Adapter Tamiya to T-Plug

Mini Adapter Tamiya to XT60-Plug

Mini Adapter Tamiya to EC3-Plug

Mini Adapter Tamiya to TRX-Plug

Mini Adapter EC3 to T-Plug

Mini Adapter EC3 to XT60

Mini Adapter EC3 to Tamiya

Mini Adapter EC3 to TRX

3.5mm Gold Plug Male (6 pieces)

Power Supply Connector Wire - 30cm - XT60 to EC3

Power Supply Connector Wire - 30cm - XT60 to 4mm Bullet Plug

Power Supply Connector Wire - 30cm - XT60 to XT60

Power Supply Connector Wire - 30cm - 4mm to XT90

RX/TX Charging Lead - 80cm - 4mm to 3-PIN XH

RX/TX Charging Lead - 80cm - XT60 to 7-PIN XH

Battery Checker "LipoPal" - for LiPo 2-6s - with LCD Display Functions: There are two functions of this compact device: 1.Battery Checker The LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage %. 2.Self Voltage Balancer This program can equalize the individual voltages to their lowest one. Balance operation automatically...

Charging lead. The total lenght is 25cm.

Charging lead. The total length is 25cm.

Multi Balancer Board - 2-6 Cells - XH, EH, HP/PQ, TP/FP Including the balancer wire to connect the board with the charger.

This very small multi-port distributor features 3x DC output ports which support banan connector (4mm) and alligator clip. 2x 5V/2.1A USB ports which support smart phone and other devices. The DC input power lead is changeable. Input Voltage: 6-18V Max. Current: 10A USB Power: 5V/2.1A Dimensions: 63.7x44x22.5mm Weight: 46g

Discharge and test your batteries with up to 35A! 250W maximum discharge power. 6V - 35V Input. No power source needed - will use your battery for power!

The SkyRC Bluetooth Dongle creates a wireless connection between a SkyRC charger and the smartphone. This gives You convenient access to all functions and settings of the SkyCharger app. Thanks to the upgrade of the Bluetooth version from 4.2 to 5.0, range, speed and more have been greatly improved. In order to be able to use the dongle, it only has to be connected to the...

The SkyRC Bluetooth Dongle creates a wireless connection between a SkyRC charger and the smartphone. This gives You convenient access to all functions and settings of the SkyCharger app. Thanks to the upgrade of the Bluetooth version from 4.2 to 5.0, range, speed and more have been greatly improved. In order to be able to use the dongle, it only has to be connected to the...

The PCH-150 PD charging adapter expands the possibilities of the T1000 charger with another handy function. With 150W sheer charging power, it can supply a wide variety of devices with fresh energy at the same time via the 4 connections. This includes even smartphones and larger laptops. Technical Specifications: Input Voltage: DC 12-24V PD 100W TYPE-C: 5-15V 3A 20V 5A 100W...

The BD380 is a powerful discharger that allows you to comfortably discharge a battery with up to 40 amperes or 380 watts. But that's not all, as the discharger also offers the ability to measure battery performance during the process and even compare it with other batteries. Precisely measuring the capacity greatly assists in selecting the best battery for your next journey....

Gold Connector 3.5mm - hexagonal shape (outside) (3 pcs)

40cm length XT60 plug Charger side: 7-pin XH type Balancing Plug + XT60 Plug Battery side: 3-pin XH Female Plug (fits most TX/RX Batteries) Please do not charge with more than 1C or 2.5A

40cm length XT60 plug Charger side: 7-pin XH type Balancing Plug + XT60 Plug Battery side: 2x 4mm Goldplug + 1x 2mm Goldplug (for Balancing)

Total lenght: 10mm

For those who want to combine 2 7.4V batteries to a 14.8V pack. Please not: Will not work with every battery. You will need 4mm batteries with open tubes. Total lenght: 28mm

For those who want to combine 2 7.4V batteries to a 14.8V pack. Please not: Will not work with every battery. You will need 5mm batteries with open tubes. Total lenght: 25mm

Perfect for those wo are using 4mm and 5mm batteries. Total lenght: 18.5mm

L Type 4 - 5 mm Battery Connector can performance and safety upgrades to your model car. The design of L-type plug holder optimizes the space utilization and enhances the impact resistance of the connection point, ensure your model car to maintain a stable power supply at high speeds or during intense operation. The 4 or 5mm Battery Connector can be freely fit to ensure the...

Content: 1 Pair - as shown in the first picture.

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.

Content: 1 Pair - as shown in the first picture.

Easily spot positive and negative with these aluminum bullet plug grips, whilst also making installing a removing bullet plugs into your battery a much easier task. Content: 1 Pair - as shown in the first picture.

Protect your screen from scratches! Please note: You will not purchase a charger. Only the screen protector.

Protect your screen from scratches! Please note: You will not purchase a charger. Only the screen protector.

TQ Balancer wire.

TQ Balancer wire.

TQ Balancer wire.

TQ Balancer wire.

TQ Balancer wire.

TQ Balancer wire.

The #2213 SWITCHED balance extension for iChargers (4010,308 & 406) has a switch to change the sensing wires from 1S to 2S. When the switch is pushed forward, towards the charger, you are wired for 1S charging. When the switch is pushed towards you, you are wired for 2S charging. You only use the 2mm balance plug (blue) when balance charging a 2S pack (this wire is...

The #2214 PLUG n PLAY SWITCHED balance extension for iChargers (4010,308 & 406) has a switch to change the sensing wires from 1S to 2S. For use with our #2620 complete charge cable assy. The #2214 switch extension is inserted between the charge cable’s balance plug and the RIGHT SIDE of iCharger’s balance port. 1S – move the switch towards the charger (position 1), use only...

Charging Adapter Wire

Stay in contact!

Stay in contact!

Stay in contact!

Stay in contact!

Stay in contact!

Stay in contact!

Stay in contact!

Stay in contact!