Suitable for DASH AI PRO

Ultra High Speed Cooling Fan - Alu - 30x30x10mm

Ultra High Speed Cooling Fan - 25x25x10mm

Suitable for DASH AI PRO

Suitable for DASH AI PRO

Suitable for DASH AI PRO

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Charging Lead 60cm for 2S LiPo - US-Style Plug - XH / XH-Balancer - 12AWG

Charging Lead 60cm for 2S LiPo - Traxxas Plug - XH / XH-Balancer - 12AWG

Charging Lead 60cm for 2S LiPo - 4/5mm Plug - XH / 2mm Balancer - 12AWG

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Suitable for DASH AI PRO and any other ESC :-)

Dash Program Card Wire 200mm

Dash Program Card Wire - for AI MAX 1/8 220A ESC

Anti-Tweak Sensor Wire

Anti-Tweak Sensor Wire

Anti-Tweak Sensor Wire

Anti-Tweak Sensor Wire

Anti-Tweak Sensor Wire

- ESC for Brushless DC Motors - designed for sensored motors from 4.5T up - designed especially for 1/10 rc cars - tft lcd color display - easy programming and real time monitoring directly on the display of ESC - advanced cooling technolody based on Aluminium Nitride Ceramic cooler - power supply: 2S LiPo - current constant / pulsed: 180A / 1500A - bec: 7.4V fixed, 4A cont....

Spare Part for Nitride

Spare Part for Nitride

As a universal part it will fit for Nitride and Oxide as well.

Spare Part for Nitride and Oxide as well.

Spare Part for Nitride

Optional Part for Nitride and Oxide as well. It work's as additional passive heatsink. Will fit for XRAY XB4 2022, 2023 and 2024.

Developed especially for 1/10th professional RC cars. Buggy, Touring, Drift, etc. Ideal solution for high level stock racing (standard, expert, open stock). Suitable also for modified with motors from 6T up. TFT LCD color display with resolution 160 x 80 pixels. Size: 38,3 (L) x 34,3 (W) x 20 (H) mm. Weight: 45 g without wires / 75 g with wires AWG14 - 180 mm. Ultra low...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - black Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - blue Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - orange Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

Replacement heavy duty fan mounting bar for attaching 40mm or 30mm fans to Exotek fan mount 1718, 1756 or 1914. Exotek fan clamps, fans and M3 hardware not included.

Now you can easily mount 2 high powered 40mm fans to the Exotek 1/8 fan mounts - a must to protect your expensive high voltage motor package. Bolts directly to Exotek 1914 and 1756 for double the cooling power in high heat applications. The fan mount positions the fans about 10mm away from the motor can. This proper spacing helps to insure the fan does not lose rpms due to...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy...

Exoteks 40mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto and through your motors vents for maximum cooling effect. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory good looks and extra durable quality....

Back by popular demand! v2 updated lighter design (10gr). Super cooling alloy finned heatsink for 1/10-1/12 Pan Cars. Updated look incorporates a light weight design that channels air through the front and passes through the back. Shaped 'fin' design insures maximum clearance whether you are running a fan behind the motor or running a high axle F1 or low axle 1/12. The heat...

Machined 6061 alloy fan mount for 30mm fans (fan not included). Allows secure, low profile fan mounting to any flat surface with a 3mm chassis hole. 2-m2.5 fan screws and 1-m3 mount screw included.

Technical Data: 3.7-14.8V operating voltage (max. 4S) 2350kV 135W @ 7.4V 3.175mm shaft diameter

Technical Data: 3.7-14.8V operating voltage (max. 4S) 7620kV 490W @ 7.4V 3.175mm shaft diameter

Technical Data: 3.7-14.8V operating voltage (max. 4S) 4720kV 360W @ 7.4V 3.175mm shaft diameter

Technical Data: 3.7-14.8V operating voltage (max. 4S) 4130kV 340W @ 7.4V 3.175mm shaft diameter

Brushless Sensor Wire - ultra flexible - 75mm

Brushless Sensor Wire - ultra flexible - 100mm

Brushless Sensor Wire - ultra flexible - 125mm

Flat Sensor Wire - 75mm

Flat Sensor Wire - 125mm

Flat Sensor Wire - 150mm

The cooler is simply pushed onto a 540 motor (standard size for 1:10) and thus increases its cooling surface and improves heat dissipation. This is further enhanced by the fan, as it forces significantly more air movement. The fan can be operated in the voltage range of 5-9V. It can therefore be easily plugged into the receiver using the existing plug - but can also be...

The cooler is simply pushed onto a 540 motor (standard size for 1:10) and thus increases its cooling surface and improves heat dissipation. This is further enhanced by the fan, as it forces significantly more air movement. The fan can be operated in the voltage range of 5-9V. It can therefore be easily plugged into the receiver using the existing plug - but can also be...

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using external tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using external tabs with ball bearings

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using internal tabs