ESC + Motor + Programming Card - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

Dragster 3 - Tamiya Euro Cup ESC - incl. Programm Card ESC + Programming Card - Tamiya Euro Cup legal! WILL BE OFFERED BULK . without BOX!

Waterproof! Brushed only. 70A cont. current 2-3S LiPo 6V @ 3A BEC

Just a simple brushless combo for a reasonable price. Made for 2S LiPo batteries. 540er style motor for 1/10.

Just a simple brushless combo for a reasonable price. Made for 2S LiPo batteries. 540er style motor for 1/10.

Features: • Super large 48-degree boost & turbo timing – Increased power output and optimized motor efficiency. • Offline data logging – Tracks ESC performance and helps you make informed decisions. • Over 33 adjustable parameters – Supports various power and driving modes. • Built-in super switching mode BEC – Support 6V/7.4V adjustable BEC to adapt to various high power...

Features: • Super large 48-degree boost & turbo timing – Increased power output and optimized motor efficiency. • Offline data logging – Tracks ESC performance and helps you make informed decisions. • Over 33 adjustable parameters – Supports various power and driving modes. • Built-in super switching mode BEC – Support 6V/7.4V adjustable BEC to adapt to various high power...

Features: Application and Level: 1/8 High-End Motor Type: Sensored and Sensorless Brushless Motor Control: Forward - Brake Firmware Update: supported Telemetrie-Aux: No Data Logging: Yes, Realtime Real-Time Data: Status, Voltage, Throttle Status, RPM/Min., Current (A) Measurements: 55x42x36mm Wire: 10 AWG Weight: 117g Input: 2-4S LiPo Current Cont. (A): 240 A Burst (A): 1100...

New from Dash is the AI Pro V2 brushless speed controller. The latest innovation in competition brushless speed control Utilising State-of-the-Art 32bits micro-controllers, and a robust software, The V2 ESC delivers the most technologically advanced features to date. The Signature Golden-Black V2 ESC features an Electrolytic Two-Step Anodizing heatsink case, improving heat...

The ESC utilizes state of the art 32 bits MCUs (micro-controller), allowing software and hardware technology to be fully explored. The ideology behind the software came from the well-established AI PRO ESC. With that said, AI MAX adopted the Boost and Turbo functions and it will work similary to that of the AI PRO. Using only the best available components and materials, the...

Utilizing state of the art 32bit (Micro-Controllers) MCUs right from the beginning, Dash is able to explore new technology and development in both software and hardware design. Understanding the needs in competition today, the Dash AI is designed to meet all competition needs. Ingredients for Speed: Ultra-fast 32 bit MCUs High capacity MOS FET Internal adjustable 6V/7V 3.0A...

Utilizing state of the art 32bit (Micro-Controllers) MCUs right from the beginning, Dash is able to explore new technology and development in both software and hardware design. Understanding the needs in competition today, the Dash AI is designed to meet all competition needs. Ingredients for Speed: Ultra-fast 32 bit MCUs High capacity MOS FET Internal adjustable 6V/7V 3.0A...

- ESC for Brushless DC Motors - designed for sensored motors from 4.5T up - designed especially for 1/10 rc cars - tft lcd color display - easy programming and real time monitoring directly on the display of ESC - advanced cooling technolody based on Aluminium Nitride Ceramic cooler - power supply: 2S LiPo - current constant / pulsed: 180A / 1500A - bec: 7.4V fixed, 4A cont....

Developed especially for 1/10th professional RC cars. Buggy, Touring, Drift, etc. Ideal solution for high level stock racing (standard, expert, open stock). Suitable also for modified with motors from 6T up. TFT LCD color display with resolution 160 x 80 pixels. Size: 38,3 (L) x 34,3 (W) x 20 (H) mm. Weight: 45 g without wires / 75 g with wires AWG14 - 180 mm. Ultra low...

Type: 1/10 Brushless Sensored Current (cont. / peak): 140A / 880A Input Voltage: 2-4S LiPo BEC: 6V/7.4V, 5A Motor Types: Brushless (with/without sensor) Motor Limits: 3S LiPo: KV Fan: Yes, by BEC Fan size: 30x30x10mm Programming: LED Program Card, LCD Program Box (G2), OTA Program Module, Seperate Programming Port Waterproof: Yes Input: XT60 Output: 4mm Gold plug female...

Type: 1/10 Brushless Sensored Current (cont. / peak): 80A / 520A Input Voltage: 2-3S LiPo BEC: 6V/7.4V, 5A Motor Types: Brushless (with/without sensor) Motor Limits: 2S LiPo: KV Fan: Yes, by BEC Fan size: 25x25x10mm Programming: LED Program Card, LCD Program Box (G2), OTA Program Module, Seperate Programming Port Waterproof: Yes Input: XT60 Output: 4mm Gold plug female...

Especially made for micro racing - 1/16 or 1/18. Waterproof! Brushed only. 25A cont. current 2-3S LiPo 5V @ 1A BEC

WP 1060 - Brushed ESC - 60A Especially made for using two motors! Waterproof! Brushed only. 60A cont. current 2-3S LiPo 6V @ 3A BEC

WP 1060 - Brushed ESC - 60A Especially made for using two motors! Waterproof! Brushed only. 60A cont. current 2-3S LiPo 6V @ 3A BEC

Especially made for rock-crawling! Waterproof! Brushed only. 80A cont. current 2-3S LiPo 6V/7.4V @ 4A BEC XT60 plug

Especially made for micro racing - 1/16 or 1/18. Sensorless Brushless only. 12T 7800kV 2-3S 30mm length 20mm diameter 2.0mm motor shaft diameter 18A cont. current 2-3S LiPo 6V @ 1A BEC

Same as HobbyWing 30112004 - but with ETS sticker and F1 rpm limiter. 60A Limit ALWAYS ZERO BOOST! One of the best ESC for real STOCK racing!

Technical Specification: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable

Ezrun MAX8 G2 Sensorless ESC 160A - 3-6s - for 1:8 Technical Data: Current: 160A / 1050A Motor: for Sensored/ Sensorless Brushless Motors Application: 1/8 cars (Touring Car, Buggy, Truggy, Monster Truck with High-Level Configuration) Motor Limit: with 4S LiPo: KV with 6S LiPo: KV Motor Size 4278 Input: 3-6S LiPos BEC Output: 6V / 7.4V / 8.4V (switchable) Fan: included Size:...

Features: User-friendly operation and installation Durable and robust design Multiple protection mechanisms (low voltage, temperature, signal loss, overload) High-performance BEC (6V/7.4V) Programmable via LCD Pro Programmer Box, LED Programmer Box, and SET button Supports CCW and CW rotation Technical data: Type: Brushless, Sensored Current (continuous/peak): 60A/200A Input...

The new QuicRun WP Mini24 features IP67 protection (dustproof and waterproof) and high torque at low speeds, making it the ideal ESC for all-weather crawler adventures. The ESC is specially designed for 1/16, 1/18, and 1/24 rock crawlers and adapts well to any terrain situation. The signal cable can be connected to a receiver channel to adjust the drag brake force in...

60A Limit ALWAYS ZERO BOOST! One of the best ESC for real STOCK racing!

The XR10 JUSTOCK G3S ESC offers even more setting options and finer adjustment to Your own driving style than the regular Justock G3 controller. Developed specifically for races and training rides, both a 0 timing and an RPM limit of up to 88,000RPM are of course available. So get ready for a fair and successful race. Another new feature is that the motor can rotate...

Especially made for Stock Spec Racing! 100A, 2S LiPo, 6V/7.4V 3A/6A BEC Touring Limit: 10.5T Buggy Limit: 13.5T

Especially created for 1:12 1S racing! 6V 3A BEC output. 120A load Size: 37.5x31x15.9mm Weight: 35.6g

The XR10 Pro WP is an ideal ESC for various 1/10 racing situations as well as for touring cars, and has been upgraded with a series of technological advancements to bring it up to the latest standards. This includes, for example, the intelligent fan, which only cools when it is truly necessary. This saves power and ensures that the controller always operates at the optimal...

The Hobbywing XeRun XR10 Pro G3 sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle...

The Hobbywing XeRun XR10 Pro G3X sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle...

Features: Integrated data logging Built-in reverse polarity protection HV servo support 26+ parameters Optimized for 1/14 on-/off-road racing Technical data: Type: Brushless, Sensored Current (continuous/peak): 70A/300A Input Voltage: 2S LiPo BEC: 6V/7.4V @ 4A (Switch Mode) Motortype: XeRun 2848 Fan: Yes, by BEC Programming: LCD Pro Programmer Box, OTA Programming Module...

Especially created for 1:12 1S Stock Spec racing! 6V / 7.4V - 3A BEC output. 80A load Size: 31.6x25.8x16.2mm Weight: 23.5g

XR8 Plus Xerun Brushless ESC 150A - 3-6s - für 1:8 Technical Data: Current: 150A / 950A Motor: for Sensored/ Sensorless Brushless Motoren Application: 1/8 Fahrzeuge (Touring Car, Buggy, Truggy, Monster Truck with High-Level Configuration) Motor Limit: with 4S LiPo: KV with 6S LiPo: KV Motor Size 4274 Input: 2-6S LiPos with 6-18 Cells NiMH BEC Output: 6V / 7.2V (switchable)...

The XR8 Plus G2S ESC is the next development of a 1/8 ESC series with 6 RPM limit profiles. An efficient system for heat regulation ensures less heat development than with other controllers, because thanks to the strong airflow on the sides of the fan and the copper heat sink inside, the XR8 is optimally protected. This is also urgently needed in some heat-up races. Designed...

The XR8 Pro G3 ESC sets new standards. 15% smaller, more powerful, and with even lower heat generation, the third generation of this series surpasses its predecessor. Designed for use with 2-4S LiPo batteries, the optimized cable routing and sleek appearance are examples of its high-quality craftsmanship. So, for those who value a powerful ESC that takes up minimal space,...

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 3500kV Outer Diameter:...

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 5000kV Outer Diameter:...

Technical Specification ESC: Current (Cont./Peak): 30A/80A Motor Type: Brushless Motor Limit: 1626er Motors LiPo-/NiMH-Cells: 2S LiPo BEC-Output: 6V/7.4V (adjustable), 3.5A Switch Mode Dimensions: 22.7x14.2x11.8mm Weight: 5g without wire Programming: shared with throttle cable Technical Specification Motor: Type: 1626 Brushless Sensor, 2-pole RPM/Volt: 6500kV Outer Diameter:...

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

60A Limit - Zero Boost One of the best ESC for real STOCK racing! Available as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T Combo.

ESC Features: More than 30 parameter setting options 3 preinstalled setups for 1/8 racing (e.g. zero timing/blinky mode, 1/8 off-road racing, 1/8 on-road racing) Inclusive a dual brake mode to switch between the regular brake mode and the disc brake mode Average 15°C cooler performance under full load than the XR8 Pro G2 Super BEC with max.12A and 6 and 7.4V for the use of...

Technical specification ESC: Current (cont./peak): 200A / 1080A No. of cells: 2-6S LiPo Motor Limit: 4S LiPo: KV = 3000; 6S LiPo: KV = 2400 BEC Voltage: 6V-8.4V - Current (cont./peak): 6A/15A Switch Mode Dimensions: 56.1x42.1x38.5mm Weight: 122g (without cable) Application: 1/8 Offroad Technical specification motor: Type: Brushless, sensored No. of cells: 2-6S LiPo Poles: 4...

The NEW LRP FlowX! What's new? - case, comdpletely made of aluminium - motor / battery wires, completely black coloured - short black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: dark blue, like Team Associated Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new V3.1...

The NEW LRP FlowX! What's new? - case, completely made of aluminium - motor / battery wires, completely black coloured - black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: dark blue, like Team Associated Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new V5.1 software -...

The Spin Pro offers all the features needed by competition beginners. More performance through ad-justable power modes and the adjustable autobrake function make the Spin Pro the perfect choice in hobby competition classes. Like all Spin speed controls, the Spin Pro is equipped with a switching BEC and a power capacitor with lowest internal resistance for best performance....

One of the best 1:8 scale brushless ESC! No limit, up to 600A / phase. Latest Version 2 from 2015!

The NEW LRP FLOW! Including software for modified and stock classes, including boos 0 - suitable for onroad and offroad - the very best ESC for ALL! The highlights: - 7 fully adjustable parameters for stock and modified - HD Pure Aluminium Case for lowest temperature - X-Brake Pro System - USB updateability - Temp Check System 3 (for ESC and engine!) - Bulletproof 6V / 3A...

The NEW NOSRAM HD! What's new? - case, comdpletely made of aluminium - motor / battery wires, completely black coloured - short black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: BLACK Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new software - Bulletproof 6V/6A BEC -...

The NEW NOSRAM HD! What's new? - case, comdpletely made of aluminium - motor / battery wires, completely black coloured - short black coloured receiver wire - short black coloured switch wire - capaciator with a flat layout - new colour: BLACK Key-Features: - Exclusive Customized SUPER FETs - Heavy Duty 2.8mm 8-layer Powerboard - All new software - Bulletproof 6V/6A BEC -...

The ORCA OE101 ESC Slim black is the latest speed controller from ORCA specifically designed for stock class racing. It is super small and leight weight and weighs only 20.8g and makes it so one of the lightest brushless speed controllers available. Dimensions: 30.45x30.35x10.35mm Weight: 20.8g Voltage Input: 6-11V Peak Current: 280A Continious Current: 100A Motor Limit:...

SETTINGS 1. Running Mode 2. Battery Cutoff Voltage 3. Punch 4. PWM Frequency 5. Dragbrake 6. Max. Brakeforce 7. Brake Punch 8. Brake PWM Frequency 9. Max. Reverse Force 10. Neutral Range 11. RPM Limit 12. Motor Link ETS Version - with preset 17.5T limit. SPECIFICATIONS Weight: 20.8g Dimensions: 30.45x30.35x10.35mm Inpout voltage: 6-11V Continuous current: 100A Peak current:...

The ORCA OE1.2 is a 2-4S capable brushless speed controller developed for high load categories. Its 200A continous current rating makes it perfect for 1/8 offroad and drag racing applications. The small dimensions of only 25.5x39.4x23mm make this speed controller an easy fit in most 1/8 cars while being capable of handling motors up to 2400kV. Technical Specifications:...

The ORCA Totem brushless esc is ORCA's latest stock spec Speed controller. It features a continous current rate of 100A, which is enough of up to 10.5T motors while using the included fan mounted on top of the esc. The 23.5g light Totem esc comes with reverse polarity protection and integrated capacitors for a even smaller footprint. Technical Specifications: Dimensions:...

SETTINGS 1. Running Mode 2. Battery Cutoff Voltage 3. Punch 4. PWM Frequency 5. Dragbrake 6. Max. Brakeforce 7. Brake Punch 8. Brake PWM Frequency 9. Max. Reverse Force 10. Neutral Range 11. RPM Limit 12. Motor Link ETS Version - with preset 21.5T limit. SPECIFICATIONS Weight: 20.8g Dimensions: 30.45x30.35x10.35mm Inpout voltage: 6-11V Continuous current: 100A Peak current:...