30x30x10mm fan with Hobbywing compatible plug and short wire.

30x30x10mm fan with BEC plug and black wire. 6.0-8.4V input.

40x40x10mm fan with BEC plug and black wire. 6.0-8.4V input.

Ultra High Speed Cooling Fan - Alu - 30x30x10mm

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 29,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

The alloy case isn't just an optical highlight, it also increases the durability of the fan. The fan spins at 25,000 RPM at 8.4V and features a dual ball bearing design. A fan is meant to be a wearing part and is not build for a long lifetime. Due to mechanical damages, burned electronics, missing grease or due to bumps, the fan can wear of with time. In a RC Car a fan can...

Ultra High Speed Cooling Fan - Alu - 30x30x10mm

Ultra High Speed Cooling Fan - 40x40x10mm

Ultra High Speed Cooling Fan - 25x25x10mm

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - black Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - blue Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

Fan Mount Clamp on Set, 1/10 Buggies, Trucks - orange Special clamp on alloy fan mount for today's buggies and sedans. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can. Lightweight, secure and just what you needed to easily mount a fan in tight spaces! The angled design allows easy mounting of fans in 2wd...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

New V2 mount with larger double screw mounting bar. The extra modular design means that with a few adjustments you can mount a fan securely in any 1/8 truggy and most e-buggies and the mount positions the fans 10-14mm away from your motor can. This proper spacing helps insure the fan does not lose rpms due to magnetic interference from your motor. A fan that is placed to...

Replacement heavy duty fan mounting bar for attaching 40mm or 30mm fans to Exotek fan mount 1718, 1756 or 1914. Exotek fan clamps, fans and M3 hardware not included.

Now you can easily mount 2 high powered 40mm fans to the Exotek 1/8 fan mounts - a must to protect your expensive high voltage motor package. Bolts directly to Exotek 1914 and 1756 for double the cooling power in high heat applications. The fan mount positions the fans about 10mm away from the motor can. This proper spacing helps to insure the fan does not lose rpms due to...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy...

Exoteks 40mm fan shroud blasts your fans air directly onto your motor for maximum cooling effect, while also acting as a finned heat sink that adds additional ambient cooling. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory...

Exoteks Touring Car style 30mm fan shroud blasts your fans air directly onto and through your motors vents for maximum cooling effect. Importantly, the shroud positions the fan about 12mm away from the motor can to help prevent the motor magnets from impeding the fan motor and the shrouds lightweight alloy construction insures factory good looks and extra durable quality....

Back by popular demand! v2 updated lighter design (10gr). Super cooling alloy finned heatsink for 1/10-1/12 Pan Cars. Updated look incorporates a light weight design that channels air through the front and passes through the back. Shaped 'fin' design insures maximum clearance whether you are running a fan behind the motor or running a high axle F1 or low axle 1/12. The heat...

Machined 6061 alloy fan mount for 30mm fans (fan not included). Allows secure, low profile fan mounting to any flat surface with a 3mm chassis hole. 2-m2.5 fan screws and 1-m3 mount screw included.

The cooler is simply pushed onto a 540 motor (standard size for 1:10) and thus increases its cooling surface and improves heat dissipation. This is further enhanced by the fan, as it forces significantly more air movement. The fan can be operated in the voltage range of 5-9V. It can therefore be easily plugged into the receiver using the existing plug - but can also be...

The cooler is simply pushed onto a 540 motor (standard size for 1:10) and thus increases its cooling surface and improves heat dissipation. This is further enhanced by the fan, as it forces significantly more air movement. The fan can be operated in the voltage range of 5-9V. It can therefore be easily plugged into the receiver using the existing plug - but can also be...

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

- Aluminum 30mm RC Fan - 3 different mounting design alternatives - Extremely reliable - For cooling of the ESC & motor - Brushless design - Bearing equipped - Internal soldering tabs - 200mm connecting cable with BEC connector - 60mm main cable soldered to fan

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using external tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using external tabs with ball bearings

30x30x10mm fan 6-8.4V DC input 22.000 - 24.000 rpm with ball bearings wire already soldered to the fan by using internal tabs

40x40x10mm fan 6-8.4V DC input 14.000 - 15.000 rpm wire already soldered to the fan by using internal tabs with ball bearings

Special designed spare part for special HobbyWing ESC.

Messurements: Size: 35x35x10mm Distanz Hole-to-Hole: ca. 30mm including 4 screws

Specification: Ball Bearing Wire length ca. 20mm 10.000RPM@5V 0.13A

Messurements: Size: 20x20x8mm including 2 screws

Specification: Oil/Porous Bearing No Plug Wire length 40mm 13.000RPM@12V 0.09A

Specification: Ball Bearing Wire length ca. 20mm 14.000RPM@12V 0.13A

Messurements: Size: 25x25x10mm Distanz Hole-to-Hole: ca. 20mm including 4 screws

Specification: Ball Bearing Wire length ca. 50mm 10.000RPM@5V

Specification: Ball Bearing Wire length ca. 40mm 10.000RPM@5V

Specification: Ball Bearing Measurements: 25x25x7mm 5V incl. two plug options

Specification: Ball Bearing Measurements: 25x25x7mm 5V incl. two plug options

Specification: Ball Bearing Wire length ca. 20mm Measurements: 50x50x10mm

for 1/8 cars fits motors with 41mm diameter allows to mount 2x 40mm fans (see photos) incl. Hardware (screws) Some pictures show the mount in use incl. a motor, fans and a car. We'll only deliver the mount, no fans, no motor, no complete car.

Keep your motor cool!

Keep your ESC cool! Compatible with the plug of Flow(X) ESC.

Keep your motor cool!

Speedo Fan 25x25x7mm (incl screws) Despite the flat construction, the airflow is extremely high. This cooling increases the speed control’s efficiency and performance significantly. The fan is the perfect addition to the SXX TC spec speedos.

Speedo Fan 30x30x7mm Improved cooling = higher performance! With the cooling fan for the iX8 and Flow, you get the maximum out of your speed control The high-performance cooling fan increases the speed control’s efficiency significantly.

Genuine accessories by ORCA.

Suitable for motor cooling.

ORCAN for VX3 and R32 ESC

This low profile fan mount features a clean and unique look. The symmetrical design allows two fans to be installed oppositely, for creating maximum cooling performance. The special aluminium provides permanent clamping force so that manual clamping is not required. The fan mount will work with all Ø36mm brushless motors.

6.0 - 8.4V input voltage 24000 rpm @ 8.4V 30x30x10mm size 8g weight

Fan 30mm with 240mm black wire This RUDDOG 30mm fan was especially developed for the needs of RC cars. The extra long-life and the high rpm of this fan makes it perfect to cool down your motor or electronics. The 240mm long black wire makes wires nice and neat. Specifications: Voltage: 5-8.4 Volt Dimensions: 30x30x10mm Weight: 6g Includes: - 30mm RUDDOG fan with 240mm long...

Fan 40mm with 240mm black wire This RUDDOG 40mm fan was especially developed for the needs of RC cars. The extra long-life and the high rpm of this fan makes it perfect to cool down your motor or electronics. The 240mm long black wire makes wires nice and neat. Specifications: Voltage: 5-8.4 Volt Dimensions: 40x40x10mm Gewicht: 8g Lieferumfang: - 40mm RUDDOG fan with 240mm...

40mm Aluminium HV High Speed Cooling Fan

Compared to standard plastic fans the aluminum case increases the stiffness and therefore the durability, which is key for high temperatures. Specially developed for ESC. Features: Aluminum Case Ultra High Speed Double bearing includes M3x14mm screws Specifikation : Voltage: 6.0 to 8.7 V Measurements: 25 x 25 x 10mm Mounting holes: Standard 20mm distance Weight: 10.1g...