4.8-8.4V operating voltage 0.070sec / 60° @ 8.4V 20kg-cm @ 8.4V 40.8x20.2x26.5mm 57g 25T gear metal gear ball bearings brushless motor full metal case low profile style

4.8-8.4V operating voltage 0.100sec / 60° @ 8.4V 60kg-cm @ 8.4V 40.8x20.2x29.5mm 75.8g 25T gear steel gear ball bearings brushless motor full metal case low profile style

4.8-8.4V operating voltage 0.065sec / 60° @ 8.4V 18kg-cm @ 8.4V 40.8x20.2x26.5mm 48g 25T gear metal gear ball bearings brushless motor center part metal case low profile style

4.8-8.4V operating voltage 0.11sec / 60° @ 8.4V 18kg-cm @ 8.4V 40.8x20.2x26.5mm 51g 25T gear metal gear ball bearings low profile style

4.8-8.4V operating voltage 0.068sec / 60° @ 8.4V 33kg-cm @ 8.4V 40.8x20.2x29.5mm 66g 25T gear metal gear ball bearings brushless motor full metal case low profile style

Operating Voltage: 4.8-6.0V Torque: 3kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Low Profile type, with metal gear.

Operating Voltage: 4.8-6.0V Torque: 6kg Speed: n/a Weight: 35g Size: 38.5x19x25mm Low Profile type, with metal gear.

Style: Low Profile Case: Alu (Upper, Middle, Bottom) Operating Voltage: 6.0-8.4V Operating Speed: 0.045sec (8.4V) / 0.055sec (7.4V) / 0.067sec (6.0V) Dynamic Torque: 17.5kg-cm (8.4V) / 16.0kg-cm (7.4V) / 12.5kg-cm (6.0V) Dimension: 41x20x26mm Weight: 52g Spline: 25T

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 41 x 20 x 26.3 mm Measurements over all: 54.4 x 20 x 31.1mm Weight: 55g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,073 Speed 60° / Sec @ 8.4V: 0,05...

Features: HV capabilities Gears crafted from titanium and steel lightweight aluminum housing Operating Voltage: 6.0-8.4V Connection Wire: 180mm length Technical specification: Output Gear: 25T Measurements: 41 x 20 x 26.3 mm Measurements over all: 54.4 x 20 x 31.1mm Weight: 55g Connection Wire Plug: JR Universal Speed 60° / Sec @ 6.0V: 0,08 Speed 60° / Sec @ 8.4V: 0,06...

The new HPS-CT501 is developed specifically for RC cars that needs a low-profile and high performance servo but don't need the full aluminium case that the CT701/702 has. Futaba's HPS servos includes a new generation brushless HPS motors that has been developed to run more efficient and cooler. UR mode setting: make sure that your SR/UR mode transmitter and receiver are...

The Futaba HPS-CT701 is specially designed for RC cars and sets new standards. A new HPS brushless motor was developed for the HPS servos, which remains significantly cooler during operation. Together with the new HPS technology, there is less power consumption over the entire operating time. Like any S.BUS2 servo, the HPS-CT701 can be connected to all conventional receivers...

This is a low-profile digital servo that uses the S.BUS method for EP touring buggies and is compatible with UR mode. Features: Low profile Digital Servo for EP Touring Buggy Supports UR mode and SR mode S.BUS method Metal 2-4 gears Aluminum final gear Coreless motor Specs: Speed @ 6.0V: 0.10sec/60° Speed @ 7.4V: 0.08sec/60° Torque @ 6.0V: 6.6kg/cm Torque @ 7.4V: 8.0kg/cm...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Steal operating voltage: dc6.0-8.4v operating speed (8.4v): 0.049 sec/60 degrees at no load stall torque (8.4v): 18.16kg.cm operating speed (7.4v): 0.056 sec/60 degrees at no load stall torque (7.4v): 16kg.cm operating speed (6.0v): 0.070 sec/60 degrees at no load stall torque...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal, Steal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.073 sec/60 degrees at no load stall torque (8.4v): 19kg.cm operating speed (7.4v): 0.083 sec/60 degrees at no load stall torque (7.4v): 18kg.cm operating speed (6.0v): 0.095 sec/60 degrees at no load stall torque (6.0v):...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Coreless Gear Type: Metal, Titanium operating voltage: dc4.8-8.4v operating speed (8.4v): 0.086 sec/60 degrees at no load stall torque (8.4v): 14kg.cm operating speed (7.4v): 0.095 sec/60 degrees at no load stall torque (7.4v): 13kg.cm operating speed (6.0v): 0.105 sec/60 degrees at no load stall torque...

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.058 sec/60 degrees at no load stall torque (8.4v): 16.0kg.cm dimensions: 40.2x20.2x26.50mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.100 sec/60 degrees at no load stall torque (8.4v): 60.0kg.cm dimensions: 40.2x20.2x29.50mm weight: 75.8g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.070 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40.2x20.2x26.50mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.068 sec/60 degrees at no load stall torque (8.4v): 33.0kg.cm dimensions: 40x20x37.50mm weight: 66.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.062 sec/60 degrees at no load stall torque (8.4v): 14.5kg.cm dimensions: 40.8x20.2x26.5mm weight: 57.2g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Coreless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.074 sec/60 degrees at no load stall torque (8.4v): 14.0kg.cm dimensions: 40x20.2x26.1mm weight: 48.0g horn gear spline: 25T

PRODUCT SPECIFICATIONS Type: Digital Ball Bearing: Yes Motor Type: Brushless Gear Type: Metal operating voltage: dc4.8-8.4v operating speed (8.4v): 0.07 sec/60 degrees at no load stall torque (8.4v): 20.0kg.cm dimensions: 40.8x20.2x26.5mm weight: 57.2g horn gear spline: 25T

Recommened for: 1:10 Offroad / 1:8 GT / 1:8 Offroad / 1:8 Onroad Dimensions: 40x20x38.5mm Operating Voltage: 3.5-8.4 Volt Weight: 71.4g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 6.0V: 0.082sek / 18.0kg 7.4V: 0.066sek / 22.0kg 8.2V: 0.060sek / 24.0kg

Recommened for: 1:10 touring Offroad is also possible! Dimensions: 40x20x23.1mm Operating Voltage: 3.5-8.4 Volt Weight: 53.5g Motor: Brushless Motor, Made in Japan Gear: 25T Wire length: 180mm Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.10sec / 10.0kg 6.0V: 0.08sec / 13.3kg 8.4V: 0.07sec / 16.8kg...

Recommened for: 1:10 Touring. Offroad is also possible! Dimensions: 40.5x20.5x25.4mm Operating Voltage: 3.5-8.4 Volt Weight: 58.5g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.13sec / 10.4kg 6.0V: 0.10sec / 13.0kg 8.4V: 0.08sec / 16.0kg

Recommened for: 1:10 Offroad Onroad is also possible! Dimensions: 40.5x20.5x23.1mm Operating Voltage: 3.5-8.4 Volt Weight: 53.5g Motor: Brushless Motor, Made in Japan Gear: 25T Wire length: 180mm Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.14sec / 16.0kg 6.0V: 0.11sec / 18.0kg 8.4V: 0.09sec / 23.0kg...

Recommened for: 1:10 Offroad Onroad is also possible! Dimensions: 40.5x20.5x26.4mm Operating Voltage: 3.5-8.4 Volt Weight: 57.8g Motor: Brushless Motor, Made in Japan Gear: 25T Fully alu case! Fully metal gear! Speed (for 60°) and torque (kg-cm) for different operating voltage: 4.8V: 0.13sec / 10.4kg 6.0V: 0.10sec / 13.0kg 8.4V: 0.08sec / 16.0kg

S15-XP Torque(6.0V): 11.5 kg-cm (159.7 oz/in) Torque(7.4V): 15.0 kg-cm (208.3 oz/in) Torque(8.4V): 16.5 kg-cm (229.1 oz/in) Speed: 0.072 sec (6.0V) │ 0.060 sec (7.4V) │ Speed: 0.050 sec (8.4V) Operating Voltage：6.0 ~ 8.4 DC Volts Weight: 55.0 g (1.94 oz) Bearing Type：Ball Bearing x 2 Motor Type：Brushless Motor Gear Type：Titanium & Steel Operating Temperature: -20℃~60℃...

The RUDDOG RCL1308 HV Low-Profile Coreless Servo is perfectly suited for demanding RC racing scenarios and features a lightweight plastic housing combined with a sturdy aluminum center section. Its coreless motor offers fast response times and high efficiency. This servo delivers precise actuation and outstanding forces, ensuring consistent control even in intense racing...

Experience the power and precision of the RUDDOG RBL1407 HV Low-Profile Brushless Servo for your RC touring car. Tailored for the 1/10 touring car class, this servo combines performance with reduced mass thanks to its lightweight plastic housing. The central part of the housing is made of aluminum for improved cooling, and features a distinctive RUDDOG laser engraving. The...

PGS-LH II Low Profile Servo - Programmable Technical specifications : Low Profile Digital Servo Programmable with SSL und Telemetrie Sanwa Super Response (SSR) Support Sanwa High Response (SSH) Support Compatible wiht Multi-Setting Programcard Brushless Motor Weight: 53.0 g Bearings: Yes Full Alu Case Dimensions: 40.2 x20.5x26.0mm Speed: 0.11sec/60° @ 6.0Volt Speed:...

PGS-CL II Low Profile Servo - Programmable Technical specifications : Low Profile Digital Servo Programmable with SSL und Telemetrie Sanwa Super Response (SSR) Support Sanwa High Response (SSH) Support Compatible wiht Multi-Setting Programcard Coreless Motor Weight: 50.4 g Bearings: Yes Alu Heat-Sink Case Dimensions: 40.5 x20.5x26.5mm Speed: 0.10sec/60° @ 6.0Volt Speed:...

PGS-CLE Low Profile Servo - Programmable PGS-CLE is developed for low power supply ESC. Low class ESC model BEC (Battery Eliminator Circuit) sometimes cannot supply enough power for servo. 3 different types preset can be set. 1. BASE (Standard mode) 2. QUICK (Aggressive mode) 3. DRIFT (Drift mode) PGS-CLE can be stable working even if cannot supply enough power from ESC....

Multi Setting Gear - Programmcard Technical specifications : Operating Voltage: 3.6V - 7.4V Weight: 75g Dimensions: 86.2 x59.0x19.2mm Compatible mit the following Servos: PGS-LH PGS-XB PGS-XR PGS-CL PGS-CX What's included: Programmcard Battery Box Manual

0.065sec / 60° @ 8.4V 20.2x35.7x40.8mm 30kg @ 8.4V 4.8-8.4V Input 62g 25T Brushless Motor Steel Gear Full-Metal-Case

Servo for Cars, Planes, Helicopters Features: scope: helicopters, planes, cars manipulating speed S2/60° (sek): 0,076 manipulating speed S1/60° (sek): 0,10 manipulating energy S2 (kg): 10,0 width (mm): 20,2 height (mm): 25,4 length (mm): 40,8 weight (g): 48,0 manipulating energy S1 (kg): 8,0 high voltage capable: no voltage 1 (Volt): 4,8 class: Low Profile ball bearings: 2...

0.07sec / 60° @ 8.4V 17kg-cm @ 8.4V 4.8-8.4V 20.2x25.4x40.8mm 50g 25T

BLACK Edition with BLACK anodized case and short (75mm) wire. SAVÖX SC-1251MG Abmessungen (size): 40.8 x 20.2 x 25.4mm Betriebsspannung (operating voltage): 4.8 - 6.0 Volt Stellzeit (manipulating speed): 0.09sec @ 6.0V (60°) Stellkraft (manipulating energy): 9.0kg @ 6.0V Kugellager (ball bearing): 2x Servogetriebe (gear): Metall (metal) Servogehäuse (case material):...

SAVÖX SC-1251MG+ Abmessungen (size): 40.8 x 20.2 x 25.4mm Betriebsspannung (operating voltage): 4.8 - 6.0 Volt Stellzeit (manipulating speed): 0.09sec @ 6.0V (60°) Stellkraft (manipulating energy): 9.0kg @ 6.0V Kugellager (ball bearing): 2x Servogetriebe (gear): Metall (metal) Servogehäuse (case material): teilweise Alu (partly aluminium) Gewicht (weight): 44.5g Zähnezahl...

0.07sec / 7.0kg - the best for touring (nitro and electric powered)

KEY FEATURES & Unique Mechanic Design & incredible efficiency and low power consumption & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum center case & HD 4096 Resolution & 2 μsec Dead Band & Superior Holding Torque PRODUCT SPECIFICATIONS Type: Digital Bearing: Dual Motor Type: Brushless Gear Type: Metal Gear...

KEY FEATURES & Unique Mechanic Design & incredible efficiency and low power consumption & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec Dead Band & Superior Holding Torque PRODUCT SPECIFICATIONS Type: Digital Bearing: Dual Motor Type: Brushless Gear...

KEY FEATURES & Unique Mechanic Design & incredible efficiency and low power consumption & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec Dead Band & Superior Holding Torque PRODUCT SPECIFICATIONS Type: Digital Bearing: Dual Motor Type: Brushless Gear...

KEY FEATURES & Ideal for 1/10 on road and 1/8 off road scale applications & Superior Holding Torque & Incredible efficiency and low power consumption & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & Programmable High torque Brushless servo & Supporting SXR, SUR, SR, SFR...

KEY FEATURES & Ideal for 1/10 on road scale applications, as well as large scale airplanes and jets & incredible efficiency and low power consumption & Titanium & Alu gears for precision and durability & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec...

KEY FEATURES & Ideal for 1/10 on road scale applications, as well as large scale airplanes and jets & incredible efficiency and low power consumption & Titanium & Alu gears for precision and durability & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec...

KEY FEATURES & Ideal for 1/10 on road scale applications, as well as large scale airplanes and jets & incredible efficiency and low power consumption & Titanium & Alu gears for precision and durability & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec...

KEY FEATURES & Ideal for 1/10 on road scale applications, as well as large scale airplanes and jets & incredible efficiency and low power consumption & Titanium & Alu gears for precision and durability & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec...

KEY FEATURES & Ideal for 1/10 on road scale applications, as well as large scale airplanes and jets & incredible efficiency and low power consumption & Titanium & Alu gears for precision and durability & Standard dimension make it perfect for vehicles that can benefit from a high quality servo & CNC Machined aluminum case for exceptional cooling & HD 4096 Resolution & 2 μsec...